"render"

Headland House in Dale, Haverfordwest is a detached barn conversion. We advised to remove all existing coatings using the DOFF & TORK system. The smooth render had evidence of red algae on some of the surfaces, we therefore recommended for these areas to be treated using a bleach solution prior to decoration of KEIM. A three-coat application of the KEIM Royalan system was applied due to the coastal location of this property, to give a long lasting, high performance coating.

A new energy centre in the heart of west London has been given a dramatic and eye-catching appearance thanks to the use of a portfolio of façade products provided by Sto. The company’s StoVentec R rainscreen system, with StoVentec A render carrier boards and bespoke 3-dimensional StoDeco profiles have been used to focus attention on London Olympia's new Energy Centre, which forms part of a major urban regeneration project in the capital.

Breathing new life into a 16th century farmhouse in Redmarley, Gloucester, Durbridge House has undergone extensive renovation works. Bryan Roe of KEIM Mineral Paints, visited the property and found evidence of algae, and flaking paint. In order to provide a solid foundation on which to paint, a skim coat of KEIM Universal Render for the base of the exterior stonework was recommended, to consolidate the fried stone and create a bell shape for improved water shedding.The damp chimney stack on the north elevation was stripped back, using the DOFF system (a high temperature, low pressure method, which is least invasive for the brick facia), to release trapped water and left to dry for two weeks prior to re-decoration. Bryan recommended removing all loose material by wire brush, as well as stripping the chimney stack and base of the stonewall to the north elevation, as much as possible.To remove the red algae, 50:50 of bleach and water was advocated, in addition to KEIM Algicid for mould and algae growth. The KEIM Royalan system was recommended, due to its durability and breathability. It was applied to the newly skimmer render and will provide a long-lasting coating, as its highly resistant to fungal and algae growth, while also being resistant to airborne pollutants and acid rain. 

This set of 12 houses, by Quarry View Developments and Progressive, sits in Llanberis, Wales. Overlooking beautiful lakes, and mountains and nestled at the foot of the Snowdonia National Park. A combination of glazing, timber, render and stone helps to create an incredibly pleasing facade that helps distinguish the project from the scenery without overpowering it.Our Blockley's Synthesis S12 mosaic brick is used in coalition with Blockley's Black Smooth to create a beautiful facade that sits perfectly within the beauty of the valley.

Ultimate Grey and Illuminating Yellow have been declared as the Pantone Colours of the Year for 2021and that grey and yellow combination was used to create a striking contrast with the contemporary cladding and render. The owners had installed AluK products in their previous property and had been impressed with the quality, style and durability, particularly for a coastal location. They had no hesitation in choosing them again this time around; and worked with AluK fabricator Rhino Aluminium and installer SG Installations to complete the design and installation.

Doors can be an expensive commodity at the best of times but even more so when they have to be fire doors to conform to RRO regulations in buildings used by the public, such as Schools, Offices, Factories, Hospitals, Hotels and Leisure Facilities.A damaged fire door can render the door’s fire rating ineffective and can be costly to replace.By protecting against damage with Yeoman Shield fire rated door protection products, doors can maintain their performance and look.Click on the short video below to learn more.

In January 2008, the Devon Partnership NHS Foundation Trust approved plans for a major redevelopment of the Langdon Hospital site based in Dawlish. RCM were appointed by the NHS to provide the Renderflex building board – a high performance cellulose fibre cement render carrier board and Y-Wall – a calcium silicate board on the inner leaf of the wall construction. The client specified robust walls in all areas, especially within the patient wards, which made RCM’s boards ideal for the project.

A private client secured planning permission for a 1.5 storey bungalow on their family’s land, in the village where their ancestors had lived for generations. Mac Eye Projects designed and constructed the two-bedroom, two-bathroom timber-frame property according to ambitious sustainability and energy efficiency goals, using SOPREMA’s ISOLAIR to ensure the necessary thermal and acoustic performance levels. This woodfibre board from the PAVATEX range was delivered in June 2020 and the external rendering of the Paddock’s walls was completed in October 2020.

Hanham Hall is a multi-award winning development of 185 homes located 7km from Bristol city centre. It has become the benchmark for sustainable housing development, meeting the projected 2015 Zero-Carbon targets. The project used cutting edge building technology in the form of SIPS panels which were tested for sound and airtightness by BSRIA and co-heating by Oxford Brooks University. Siniat's Bluclad was an integral part of the SIPS panel, providing a substrate for the final external render finish.

Tried and tested by an independent surveyor, the RendaClad solution has demonstrated to be more cost effective than traditional methods of masonry construction with a rendered finish when looking at a holistic house approach. Further additional benefits of the system include lightweight, durability, strength, fully tested and accredited, low maintenance, guaranteed, and availability of materials. These benefits aided delivery of the entire contract ahead of programme and provided early tenancy for those in need and advanced income to Devon and Cornwall Housing to that initially proposed.

The Project Aston University Student Union at the heart of the University’s campus has seen a £6.5m investment.  The new, two-story building, home to over 100 student clubs and societies, acts as the social hub for the 13000+ students at the university & replaces the old 1960’s Building. The Universities brief was to incorporate the local area into the project using images of Birmingham City Skyline. The Challenge Offer a full height cubicle system, suitable for the environment and to a specification befittng the digital imagery. Digitally render images onto Laminate and apply to the façade of the full height system. Manage the precise fabrication process through the factory. The Solution  Excelsior’s Flush 30 Cubicle System encompasses a rebated aluminium frame to the doors and pilasters. The aluminium edge detail provides a robust trim and looks innovative within this modern building, an unrivalled system within the washroom market.The images, supplied by the client were digitally rendered onto laminate by Formica Younique and applied to the façade of a full height Flush system.Max McLoughlin, CEO of the Student Union comments: ‘We want the building to make students feel proud to be at Aston University. From a design perspective, we wanted the students to feel fully immersed in life on campus & we are very happy with the result’.

BackgroundLocated in the Ancoats area of Manchester, the Albion Works strip and re-fit project was funded by the Building Safety Fund, a Government Fund to remove unsafe non-ACM cladding on residential and mixed-use properties that are 18 metres and over and do not meet building safety regulations.K Systems Approved Installer QFF Façades were contracted to complete the exterior wall insulation and rendering of the 8-storey residential building.The original 60mm EPS system was stripped from the building and replaced with a safe, thermally efficient façade solution, which upgraded the fire performance of the cladding, ensuring the safety of both the building and residents.Our ServiceK Systems provided support throughout the application process for this Building Safety Fund project. The Technical team offered on-site technical and installation support throughout the build process and supported QFF to ensure quality and reliability.We produced a bespoke specification and worked closely with Thomason Consulting and QFF Façades to agree and deliver specifics such as fire stopping and abutment details.From design advice through to installation, we offered a partnership approach which aided a smooth installation process with minimal disruption.Technical Project DetailsThe original sheathing boards were replaced, and the K Systems Exicco M drained cavity façade system was installed. This high performing drained cavity system was specified as a requirement for this steel frame residential building. 60mm mineral wool insulation was specified to retain the line of the existing façade.Fire safety with high rise buildings like Albion Works is of utmost importance and this solution generates high levels of fire resistance and non-combustibility (A2, s1-d0 rating), meaning the latest building regulations were complied with. Additionally, the thermal performance of the building improved with a U-value of 0.28 W/m²K being achieved. Residents will therefore enjoy reduced heating costs and better living conditions.For the finish, silicone thin coat render ensured that aesthetically Albion Works had a clean, crisp attractive appearance. This durable, low maintenance render transformed the outside of the building and will ensure a longlasting finish to the property.

BackgroundLocated in a prominent location on the Morecambe seafront, the Broadway Apartments project was large new build steel frame apartment block.A challenging project to be involved with, as M H Stainton Homes wanted to create an iconic building on a corner location. The steel frame was key, combined with curved glazing on the corner elevation of the building. Then a lightweight cladding solution was required for the rest of the façades.K Systems approved installer M & M Façades were contracted to complete the exterior wall insulation and rendering of the 8-storey residential building.Our ServiceWe worked in close partnership with M & M Façades throughout the duration of the project. The K Systems Technical team offered on-site technical and installation support throughout the build process and supported the M & M Façades team at all stages of the project.As the building is over 18 metres, a bespoke specification was produced to ensure compliance with the current building safety regulations.A direct fix system suitable for steel frame structures and all building heights was specified, ensuring the safety of both the building and future residents.Technical Project DetailsAfter numerous design meetings the K Systems Direct Fix M (Mineral Wool) EWI system with a Silicone Render (TC 15) finish was chosen, meeting the requirements of M H Stainton Homes.This system provides high levels of fire resistance and non-combustibility bringing the apartments in line with mandatory Government requirements for buildings over 18 metres tall.We specified the use of multiple thicknesses of insulation boards (50mm, 100mm and 170mm) to allow for the line and level of the steel frame. A U-value of 0.28 W/m²K was achieved, meaning the residents will enjoy thermally efficient homes.For the finish Silicone TC 15, our high-performance thin coat render, was used. With the coastal location, this durable, weather resistant finish offers an eye catching, clean design, creating a modern and crisp aesthetic. Its hydrophobic properties provide a low-maintenance finish.We delivered a safe, thermally efficient, eye-catching design with a long-lasting finish that residents will appreciate for years to come.

Architects: Loyn + Co Set in a stunning location in the heart of the Welsh rolling countryside and valleys, Vila Mir is a contemporary new-build home that features large sliding doors and windows to maximise light and to breakdown the boundaries between the house and its surroundings. Designed by the award-winning Loyn + Co the project was shortlisted for the Wales Gold Medal for Architecture 2018 and sits within mature gardens on a sloping site. A central rendered chimney helps divide the structure of the house with the ground floor of the property built into the side of the slope.

Langley Academy Primary School, is a modern 2 storey development which will house 630 nursery, reception and junior pupils in Slough Berkshire. To carry out the main works of this project, the sub-contractor was appointed to construct the building using a concrete frame and cement particle board, then wrapped in high quality external wall insulation and render materials from SPSenvirowall. Working collaboratively, this saw the installation of 1100 meters of 200mm insulation, which met the desired thermal performance of the building as well as contributing to the fire and acoustic requirements.

The Castle Hotel Windsor, dating back to the 1600s, is situated amongst some of the most historic examples of architecture in the UK. The hotel is located opposite Windsor Guildhall, near to royal attractions such as St George’s Chapel and Windsor Castle.The Castle Hotel first began its life in 1528 as The Mermaid Inn, brewing beer and cider. In the 1700s, Richard Martin was awarded the first of the hotel’s Royal Warrants, to provide horses and carriages for the royal household, making it one of the most popular and grandest places to stay in the Royal Borough.By the 19th century, the Duke of Wellington dined at the hotel following his victory over Napoleon at the Battle of Waterloo, which elevated its reputation as the connoisseur’s choice of accommodation in the area.Today, The Castle Hotel Windsor retains this reputation and has recently been restored and to preserve the elegance and atmosphere of its rich history.It was recommended to remove all existing render and re-render using NHL (Natural Hydraulic Lime) to allow full breathability.The KEIM Soldalit-ME system, in colour 9435, was specified for the redecoration of The Castle Hotel Windsor to provide a long-lasting and durable paint finish. It has the added environmental benefit of helping degrade nitrogen oxide pollutants from the atmosphere. The photocatalytic reaction also helps to breakdown organic material and contaminants, keeping surfaces cleaner for longer.

In February of 2022, Towelrads embarked on a collaborative venture, joining a 36-month ongoing initiative aimed at retrofitting Cwmglas Primary School. To ensure minimal disruption to the school’s daily operations, this project has been thoughtfully divided into several stages.Stage 1The initial phase, designated as Stage 1, focused on the top floor of the school premises. Specifically, attention was directed towards the music education and nurture rooms situated on this level. A noticeable difference in temperature existed within these spaces, making them colder than other areas throughout the school. These rooms sported aging standing convector heaters, rendering them ineffective. Furthermore, the characteristics of the building’s construction, the room dimensions, and the heat load posed challenges that rendered conventional low surface temperature radiators insufficient.In response, the decision was made to utilise the Towelrad TZT convector heater equipped with an integrated fan. This selection proved suitable for the low-temperature wet heating system, offering an elevated heating capacity. Notably, the rounded edges of the TZT convector heater not only enhanced its aesthetic appeal but also elevated the safety of the products, rendering it an ideal choice for a school.The thermostat-controlled fan speed of the TZT convector heater ensured continuous and responsive temperature management within the room, promoting optimal thermal comfort.Although the solution was successfully implemented within the designated rooms, the challenge persisted in the corridors. Enter our Vertical and Horizontal LST Ultra Radiators, serving as the perfect antidote to this issue. Our Ultra LST radiators deliver impressive heat output while maintaining a low surface area. Moreover, their covers, measuring a substantial 2mm in thickness (above industry standards), guaranteed safety across the entirety of the top floor.The Future: Stage 2With the successful completion of Stage 1, marked by the seamless integration of our products into the design framework, we have been entrusted with an extension of our role into Stage 2. This forthcoming phase encompasses the lower floor of the school, encompassing the dining hall, corridors, and classrooms. This work will be carried out over the summer months so that come the start of the school term the students can tackle the winter months in a comfortable learning environment.

NV Buildings is one of the most prestigious and iconic residential sites in Greater Manchester.The distinctive sail-shaped buildings are a major landmark in Salford Quays. The blocks have a curved main elevation providing a unique aesthetic on the skyline and are one of the most popular developments in the area.With a prominent location in Salford Quays, adjacent to the Lowry Theatre and Media City TV headquarters, the apartment blocks feature in many iconic photos of the area.The project itself was funded by the Building Safety Fund, the Government’s £4.5 billion fund to remove unsafe non-ACM cladding on residential and mixed-use properties that are 18 metres and over and do not meet building safety regulations.Our Approved Installer QFF Facades were contracted to complete the exterior wall insulation and rendering which upgraded the fire performance of the cladding, ensuring the safety of both the building and residents.Three 15 storey blocks were refurbished, with a safe and thermally efficient façade solution.Our ServiceWe worked in close partnership with QFF Facades throughout the duration of the project.Deliveries and install were strictly monitored and a very systematic approach was followed. A planned install programme was agreed to ensure minimal disruption to the residents of N V Buildings, who remained in their homes while the work was carried out on this prestigious site.We produced a bespoke specification which included various detailing such as soffits, balconies, and full height panels.A partnership approach was vital, as we worked with QFF Facades, Thomasons Consulting engineering, and the fire officer to agree upon and deliver specific detailing at abutments, openings, and for the drained cavity of the façade system.Particular attention to detail was afforded to the drained cavity fire-stops, including fire-stop details between floors, at party walls for each apartment and around openings.As part of our service commitment, our technical team were available to provide hands-on-guidance, offer support, technical guidance and ensure high levels of quality.Technical Project DetailsAfter testing, the existing cladding had been deemed a fire safety risk by experts and therefore needed to be removed and replaced with anon-combustible alternative.The project was a strip-and-refit of a drained cavity external wall insulation system, which included an expanded polystyrene insulation system.Our Approved Installer QFF Facades installed a K Systems Exicco M, Drained Cavity External Wall Insulation System for steel frame buildings, utilising Mineral Wool insulation. This high performing system provides high levels of fire resistance and non-combustibility.The fire classification of the façade for N V Buildings was upgraded to A2-s1, d0 and therefore complies with the latest building regulations, ensuring the safety of its residents.For the finish, high-performance thin coat silicone render (Silicone TC) was specified. Our Silicone TC render has a number of fantastic advantages including ease of application, and its hydrophobic properties make the render low maintenance. Available in a wide range of colours the topcoat finish used on NV Buildings is a light grey to match the original façade, meaning aesthetically the iconic buildings maintained their distinctive design.

BackgroundThe BISF (British Iron and Steel Federation) constructed the Newarthill properties in the 1940’s, utilising steel-framed walls that were initially coated in cement render and vertical steel panels.In previous renovations overseen by the Local Authority, the upper level of the building was clad in PVC weatherboard, while the lowest floor had its exterior re-rendered. The building is characterised by its non-traditional construction style.The houses had extremely poor thermal performance and the flats were difficult and expensive to heat, especially with the rising fuel prices and current cost of living crisis, meaning some residents were in a state of fuel poverty.North Lanarkshire Council required an EWI solution that would achieve the following three key objectives:- Improve the thermal performance of the property portfolio- Specify a system that would achieve a U-value of 0.17 W/m²K and would involve as little technical detailing around the property as possible- Ensure the properties had a modern and aesthetically pleasing look as the current exterior was tired and datedUnderstanding and appreciating K System’s expertise in this sector and innate ability to deliver best-in-class refurbishments, North Lanarkshire Council appointed the partnership of K Systems and Ailsa Building Contractors to tackle the low rise refurbishment project.Our ServiceAs the Newarthill development was already occupied, a key element of this project was to deliver the refurbishment with minimal disruption to current residents and / or neighbouring houses.This is one of K Systems strengths, ensuring jobs are delivered in a timely fashion, without delay, without disruption, and with full disclosure of each phase given to residents throughout the project to build rapport, trust, and confidence.On this particular low rise refurbishment, which had limited access points for all traffic in and out surrounding its immediate vicinity, K Systems had to work closely with the contractor, main contractor, and local authority to ensure they were working in harmony to negate any unnecessary commotion.K Systems’ technical team also carried out regular site visits to make sure the system was installed to the highest standard, in line with specification, and to ensure all involved parties were delivering to time and budget.The refurbishment of the properties is a great example of K Systems’ unparalleled ability to deliver constructional excellence that not only meets but exceeds the expectations of its customers.Technical Project DetailsOn initial scope, the K Systems team identified that a major challenge for this project was going to be the technical detailing between the timber frame sheeted ply at the top storey and precast concrete slab at the bottom. Several U-value calculations were completed by the experienced K Systems team to support the Council’s request of minimal detailing around the property and the target U-value.To meet these requirements, the K Systems P EWI system was specified, which utilises phenolic foam insulation boards. This insulation is lightweight and has a high thermal performance, allowing for thinner sections of insulation to achieve optimal thermal efficiency - perfect for this project, achieving the target U-value of 0.17 W/m²K , up from 0.32 W/m²K.It is a suitable solution for buildings that are restricted in expanding their footprint due to pavements or nearby properties, and can be easily installed on masonry structures, as well as non-traditional structures - an ideal solution for the Newarthill properties.Addressing the request for a modernised aesthetic, a dash render finish was specified. This render is extremely robust, hard-wearing, and low maintenance, ensuring the properties’ refreshed exterior would remain for years to come. The dash render was also complementary to the existing local property portfolio which was something the Council wanted to achieve.This refurb completely transformed cold, weathered, distressed housing in a Scotland suburb into warm, comfortable, aesthetically pleasing homes that met the exact requirements of North Lanarkshire Council and reduced the energy bills for residents due to improved thermal performance.

This 12 year old, sea-facing property suffered from pink algae growth affecting the textured through-colour render and copings stones. There was a leak to the external staircase and the balcony downspout, which caused staining and what appeared to be salt efflorescence; this area required attention prior to decoration. KEIM Royalan was specified on the sea-facing elevation to protection the property from harsh weather conditions and give a long lasting, colour-fast and decorative matt finish. KEIM Lotexan was applied onto the coping stones to help shed water and reduce algae growth.

A requirement in Corstorphine Wright’s design brief was to avoid horizontal movement joints in the finished façade, which would have been the result had a traditional SFS Infill to concrete frame approach been taken. Working with Willmott Dixon at the early design stages of the contract, Metsec’s in-house design team proposed a continuous walling solution formed from SFS to support glazing and rendered elements that would form the external skin of the façade. Metsec’s solution included the use of fixing cleats to connect the SFS continuous walling to the structure’s concrete frame.

Victoria Residences is a bespoke collection 11 luxurious apartments and penthouses with elements of traditional British heritage blended with a contemporary and timeless design. Replicating powerful Georgian features with modern thermal efficient technology was a primary driver for the architect selecting Licata Building Systems as the facade provider. Specifying Licata Therm Eco, the installing partner used ashlar plus other decorative profiles to ensure the properties regal vision was achieved. The system was finished with a 1.5mm self-cleaning Silicone render to ensure the building retained that “just-applied” look for the longest possible period.

The new business center of Novo Nordisk in "Bagsværd" houses the senior management of the company and hundreds of administrative employees. 2250m2 of fabric finishes barrisol "Reves satines" colors "Blanc Wight" were installed. To achieve this the impeccable design, the system MINISTAR® Barrisol was used. The system Barrisol MINISTAR®, like all Barrisol system is dismantled and reassembled for easy access to the plenum. The night lighting is indirect lighting LED RGB (color change) that thanks to the reflection rate of the white finishes 89% offers exceptional color rendering. Architect : Henning Larsen

The Grade II listed building where 19th century novelist Jane Austen spent her last days, was restored to its former glory. The SC4 decorators used a host of Johnstone’s products to restore the property. In keeping to the original colour, the robust Johnstone’s Stormshield Smooth Masonry paint in County Cream was used for rendering. Stormshield Flexible Primer Undercoat, together with Flexible Gloss in French Lime achieved an impressive finish for the door of the house. Additionally, Johnstone’s Primer was used to freshen up window frames and sills. Lastly, Stormshield Flexible Gloss was applied for a premium finish.

The facade of Rollercoaster House is made up of render, a curtain wall system and Hardie® Plank cladding. It is the first time that site manager David Tomlinson has worked with the product, who states that the coastal environment conditions were the main factor when deciding which type of cladding to use. ‘With timber, David says, ‘however good a product you are going to get, it wouldn’t have had the same lifespan as Hardie® Plank at the end of the day. PVC discolours, especially the darker colours, but I am expecting and hoping that Hardie® Plank will stand the test of time.’

Secreted within the grounds of a Victorian villa these 2 new Mews properties and 3 new Townhouses replaces demolished 1980’s office facilities. A strong masonry base envelopes a timber clearstory and gables, aluminium dormers and a Zintek Mediterranean Blue zinc roof, to give a truly contemporary interpretation of a traditional mews building. The Townhouses are formed with complex twisted geometries. As with the adjacent mews, materials were selected incorporating a solid masonry base, timber cladding to the projecting cantilevered boxes, aluminium glazing systems, white render and topped with blue zinc mono-pitched roofs.

Beechview Drive is a development by MD Constructions Ltd consisting of 8 brand new, luxury detached family houses set in a secure gated development. Each comprising 5 bedrooms, 3 bathrooms, stunning kitchen diners and integral double garages. Licata Building Systems supplied full silicone render systems and clay brick slips systems for the facades of the houses. The combination of the two finishes created a modern style to the development. Full Licata waterproofing systems were used in the bathrooms of the properties and were also finished of with high quality premium Italian porcelain tiles supplied by Licata.

Renderplas PVC beads for rendering, plastering and dry lining are exhibiting their benefits at London's Victoria and Albert Museum and a number of other prestigious London projects by David Andrews Construction, a leading specialist in high quality trade finishes. The award-winning contractor has used over 3,000 metres of Renderplas beading for various new build and refurbishment contracts, from hotels, luxury homes and leisure centres to one of the capital's most popular museums. As a high volume customer, Renderplas is able to offer David Andrews direct-to-site deliveries, saving the contractor valuable time and resources.

Project type: RestaurantLocation: Rutland Street, Ilkeston, DerbyshireProduct: Shadex 100 Brise Soleil Horizontal Support method: First Fix Brackets: Through CladdingFirst Fix Brackets: Curtain-walling MullionsFirst Fix Brackets: Blockwork, Before RenderFinish: Syntha Pulvin RAL 5012 Matt Light BlueFire rating: A2 s1, d0 Non-combustible (Reaction to Fire EN BS 13501-1:2018)Architect: Peart Bradley ArchitectsContractor: Coxmoor Projects LtdSub Contractor: R. & J. Projects Ltd

BackgroundThe new multi-million euro Buncrana Primary Care Centre development was an exceptional project to be involved with. This high-profile project was funded by the HSE, with the aim of bringing many healthcare services together in one new state-of-the-art centre. Construction was led by local company McCallion Group and the 56,500sq ft. facility, which is spread across three storeys, boasts underground car parking which can house 126 staff. The centre is an excellent asset to the local community, ensuring the vital health services people need to avail of on a regular basis are available in one central location. For the client, the key requirement was to build a modern, aesthetically pleasing, energy efficient facility that achieved a target U-value of 0.15W/m ² K. After extensive planning, focusing on matching an appropriate insulation system with a complementary finish, K Systems provided a full technical specification and a comprehensive delivery plan.Our ServiceOur dedicated team of technical specialists were on hand to fully support throughout the duration of this project, ensuring the highest levels of construction were achieved. The K Systems Technical Manager, Gerry McErlean regularly visited the project to inspect progress and offer hands-on-guidance and technical support. Local installer GD Plastering worked very closely with Gerry to ensure a high standard of work was achieved and great attention to detail is evident throughout this project. Due to the size and scale of the Care Centre, Gerry recommended that the TC render finish was spray applied to ensure a consistent finish and aid the speed of application. GD Plastering took this advice on board and invested in a spray machine, resulting in a uniform finish, faster completion and reduced labour.Technical Project Details After numerous design meetings taking into consideration client requirements, budget and timeframes, the K Systems E EWI system was specified. This high-performance, light-weight and cost effective system based on expanded polystyrene (EPS) insulating panels offers a great fire rating of B-s1,d0 and is available in a range of finishes. The mixed substrate of reinforced concrete and lightweight block had alignment issues. We specified the use of multiple thicknesses of insulation boards, that were fixed adhesively and mechanically to overcome these alignment issues. Our specification included bespoke technical detailing, such as compression joint detailing on every floor and our site inspection teams were on-site when required to offer a range of support and guidance. For the finish, thin coat silicone render (Silicone TC) was specified. Providing a variety of benefits, K Systems thin coat render offers silicone and polymer-modified technology to provide long term weather protection, alongside excellent breathability and water repellency properties. With the unpredictable Irish weather, this durable finish will withstand the elements and offers an eye catching, clean design, creating a modern and crisp aesthetic. Available in a wide range of colours, K Systems silicone render is the most flexible on the market, making cracking over its lifetime less likely. Its ease of application made it an ideal choice for a project of this scale and size and its hydrophobic properties provide a low-maintenance finish for years to come. We delivered a long-lasting, safe, eye-catching design for the Buncrana Primary Care Centre that brings exceptional thermal comfort to the property. The target U-value was achieved, allowing energy savings and reduced costs for the client throughout the lifetime of the Centre.

A major part of the project was restoring the building’s original wood windows, which had been covered over with aluminum windows 30 years ago. The aging units—242 in total—had suffered from fogging, failing glass, air leakage, & broken balances that rendered them inoperable. Window manufacturer Re-View, were selected to restore the windows. Re-View restored the windows using restoration epoxies and replicated Accoya wood parts. Re-view chose Accoya due to its durability and 50 year guarantee. As forecasted at the start of construction in 2013, the work will be completed in June 2017.

Portsmouth’s iconic Spinnaker Tower in the UnitedKingdom is described as one of the most spectaculardesign projects. With a leading powder coating fromSherwin-Williams, the tower is guaranteed to stayshipshape for years to come.Soaring 170 meters above Portsmouth’s historiccoastline, the Spinnaker Tower marks the completionof a massive £84M redevelopment scheme: TheRenaissance of Portsmouth Harbour. As a majorlandmark on the South Coast, the sail-shapedproject demanded the ultimate aesthetic anddurability from a powder coating finish.Sherwin-Williams approved-applicator MetalionLtd applied Syntha Pulvin coating products to thetower’s lift areas and observation deck. The finisheswere specially mixed to replicate the color of theexternal render for the project.

Modular buildings are becoming a more popular solution as they demonstrate cost savings, shorter construction time and sustainability benefits. Go Modular Technologies (UK) Ltd manufactured ten flats constructed by nine large modules on three levels over the concrete commercial ground floor for this project in Poole. We were able to offer an affordable A2 fire rated solution to finish the building envelope which resulted in the facade being completed in Hardie® Architectural Panel. The planning approval was originally for render and buff brick so we were able to provide a similar look with our Smooth Sand texture which was chosen in three of our core colours to give this coastal location a modern and contemporary look.

Location: Lymington, HampshoreProject Type: HousingDevelopment Cost: £80mProduct: Shadex 150 Raking: First Fix Brackets (Thru Render)Shadex 190 Drop-in Cassettes (Structural Steel Supports)Aluminium Plain FasciaDelta 100 GutterDelta 150 Gutter100mm Round Contemporary Rainwater PipeMeridian Wall CopingFinish: Syntha Pulvin RAL 7000 Matt Squirrel Grey: Marine SpecificationFire rating: A2 s1, d0 Non-combustible (Reaction to Fire EN BS 13501-1:2018)Client: Redrow Homes LtdArchitect: AAP Architecture LtdMain Contractor: Redrow Homes LtdSub Contractor: Stafford Rainwater Systems Ltd

When the 35th South West Cheshire Scouts moved into their brand new £285,000 state of the art Scout Centre, they immediately noticed that a problem with extreme echoes in the main hall.The hall is used by over 120 Beavers, Cubs and Scouts weekly, plus wider community use, so it was imperative that the acoustic issues were resolved as quickly as possible.The building itself was purpose built and is a conventional brick construction lined with Thermalite blocks. The main activity area measures 11 x 11 metres and around this are toilets, a kitchen, large equipment store and a small meeting room. The store area remains with the painted Thermalite blocks, but the remainder of the building has been rendered and skimmed with plasterboard. The decision was made by the Scout leaders that it was inappropriate to use plasterboard in the main activity hall fearing it would not stand up to the rigorous activities of the scouts and would soon get damaged, therefore opting for render and plaster. The ceiling was skimmed plasterboard.After immediate recognition of the acoustic problems within the building, the organisation approached Hush for advice and guidance. Our technical manager carried out tests, calculating the overall existing reverberation time to be 3.9 seconds with a peak at 500 Hz of 5.39 seconds. Subjectively the reverberation time seemed longer, around 6-8 seconds, which was surprising in a hall of these dimensions and construction.After carrying out the tests on the centre, Hush recommended a solution to treat the hall (aiming for a reverberation time of 1.5 seconds over the wider frequency spectrum) using 40x Hush Absorber 50 panels.The transformation was instantaneous, with immediate feedback that they could hear the room recovering. John Bennett, Group Scout Leader, said“The result has exceeded our hopes, it is now possible to have a quiet conversation whilst 20+ six to eight year olds are having fun! Not only that, it looks good as well.

Newton Specialist Contractors ASF Waterproofing were called in to investigate why the Bridge Master’s Quarters at No.1 Tower Bridge was suffering from damp and proceeded to install multiple Newton products to resolve the issue.At the world-famous Tower Bridge, landscaping contractor Maylim was commissioned by the City of London Corporation to investigate why the Bridge Master's Quarters at No.1 Tower Bridge was suffering from damp.After excavating, they discovered that the structure had no effective damp proofing protection. Newton Specialist Contractor ASF Waterproofing were commissioned to install new damp proofing measures to solve the issue.ASF Waterproofing approached the project in two phases, using multiple products to effectively damp proof both inside and outside the building. At the start of phase one, ASF correctly prepared and cleaned the internal wall surfaces before installing a new damp-proof course by injecting Newton 804-DPC into the walls at regular intervals, then sealing the holes with Newton 313-WP. The walls were then smoothed with a new internal render, ready for Newton 103-S to be quickly and easily sprayed to provide a final barrier to water.For phase two, the ASF team turned to the external walls of the structure, preparing and cleaning the surface before applying a new external render coat. The wall was then thoroughly waterproofed with four coats of the flexible, resilient Newton 109-LM. To ensure that the building was completely protected externally, the waterproofing began at 1 metre below ground level and extended all the way up to the existing windowsills.Thanks to their meticulous attention to detail and high standard of installation, ASF Waterproofing were able to provide both the contractor and the client with a high-quality and comprehensive damp proofing solution. As a result, the City of London Corporation can now hand over the building to the new lease holder, safe in the knowledge that it is well protected from damp.