"paint"

REQUIREMENT: A robust step system with handrails to aid a visually impaired tenant in accessing their garden.The council owns the property; therefore, the specifier required a product that can easily be removed in the future and leave little to no impact on the building.Our system was ideal because safety features, including yellow tread strips, could be fixed along each step nosing, and a rubber crumb cover could be laid over the surfaces to prevent the tenant from slipping.The product is also easily removable and only requires minimal bolting.ADDITIONAL INFORMATION: CAD and technical drawings were designed by our specialist designer in-house.END RESULT: A step system with three risers and a platform was installed in less than a day. The steps fully comply with Part M and K of Building Regulations for dwellings. All council properties must adhere to these guidelines. FEATURES INCLUDED:Trombone Ends - these are added to the ends to prevent clothes catching.Mesh Platform - the self-draining mesh allows water to pass through rather than collect on the surface.Standard Handrail - this handrail system ensures users always have support to hold onto.Standard Colour Black – Systems are powder coated black to create a durable finish that is tougher than conventional paint.Telescopic Legs - Legs can be adjusted to accommodate different threshold heights.EXTRA FEATURES INCLUDED:Yellow Tread - this is a safety feature designed to help those with impaired vision identify the nose of the ramp. Additionally, it helps users distinguish any level changes.Safetread Rubber Surface - This is a soft, slip-resistant surface that reduces the impact of falls. The product is made from the same materials used in soft play areas and is ideal for nurseries, schools, and public facilities. It is available in a range of colours and will continue to perform in all weather conditions.

ObjectiveSaving Graces Interiors, an interior design company based in Dundee, Scotland, offer a truly bespoke interior design service with a focus on creating beautiful spaces that reflect the personalities and lives of their clients.Working with Piperdam Golf & Leisure to refurbish 8 lodges for luxury getaways, Saving Graces Interior Designer, Antonia Burnett, chose the Bushboard Nuance range for the shower enclosure areas.Observation‘When I started working with Piperdam I needed to find a bathroom wall panel that was not only robust but also attractive. I spent a lot of time researching and when I landed on the Bushboard website I could see that the designs were miles ahead of the competition.’Nuance is a unique, 100% waterproof, extrusion-free panelling system that can installed in a matter of hours. Whether the project look is traditional or contemporary, the designs and textures have been carefully selected to include plain décor, as well as stunning marble and stone designs, and on trend woods.OutcomeAntonia decided to use Silver Travertine, a beautiful timeless design to suit any style of bathroom and work with a variety of paint colours. ‘As an interior designer I need a supplier that is reliable, affordable and who provides good quality products, Bushboard ticks all the boxes.’‘Rebecca Checketts, Business Specification Coordinator was extremely helpful in explaining the benefits of using Nuance and arranging next day samples.’‘Installation was quick and very straight forward and Bushboard have been on hand from start to finish. I am absolutely delighted with the end result and we will certainly specify Nuance again.’For more information about the Nuance range and other Bushboard products, to request a RIBA CPD, download an NBS specification or to order samples visit www.bushboard.co.uk

The Lanark Hydro Electric Scheme is a remarkable project. When it was completed in 1927 it was the first of its kind in the United Kingdom. The Scheme refers to two hydroelectric plants in Clydesdale, South Lanarkshire, Scotland: Bonnington and Stonebyres’ Power Stations. They both take water from the beautiful Falls of Clyde. Bonnington’s water comes from just above the Linn in New Lanark and Stonebyres from above Stonebyres Linn near Kirkfieldbank. The abundant supply of water from the River Clyde continuously spins the power stations’ turbines providing a reliable and sustainable source of renewable electricity. Combined, they create enough electricity to power over 17,000 homes in the UK.  The two stations have been exquisitely refurbished by our client Drax, who acquired them as part of a £702 million deal. Both Bonnington and Stonebyres are category ‘A’ Listed Buildings, the highest possible grading, as a site of national architectural importance. This means it was imperative the new steel windows were as close a match as possible to the originals. The Clement W20 steel window range with genuine T bars, was chosen for the two Power Stations. Polyester powder painted in striking RAL 6005 Moss Green. Lodsworth handles complement the windows with matching peg stays in Antique Bronze finish. Clement made around 120 steel windows for the projects, including nearly 400 individual fixed lights, but the most beautiful is perhaps the enormous curved head windows on both sides of the buildings, which look spectacular and let in masses of natural light.  Drax Group senior civil engineer Anne Kerr said “We are delighted with the service and quality of windows supplied and fitted by Clement. The new steel windows fitted in the refurbished building look stunning and exceed our expectations." 

The India Buildings is located on Water Street in the centre of Liverpool’s financial and business district. It was designed by architects Arnold Thornely and Herbert J Rowse, following a competition to design an office block which was judged by the great Sir Giles Gilbert Scott and built between 1924 and 1932 for the Blue Funnel shipping line owned by Alfred Holt.The building’s design is influenced by the Italian Renaissance style and it has several features of the American Beaux-Arts style, including for example the sculptures of cherubs above the windows.Having sustained damage during World War II the building was restored to its original state after the war under the supervision of Rowse, the original architect.In 2017, the Grade II* Listed Building was purchased by Legal & General and it was announced that HMRC would base a regional centre there. Renovation works commenced with the focus on creating modern, comfortable office space while retaining the heritage features of the building.Clement Windows Group was selected to manufacture and install the new double glazed steel windows which match the original single glazed metal windows and improve thermal performance and energy use within the historic building. Almost 1,000 windows from the Clement MW40 range were specified, polyester powder painted in RAL 9016 (White).Alex Harrison of architects Falconer Chester Hall said: “We had the pleasure of working with Clement on the steel window replacements of the India Building refurbishment project. Their performance in every aspect of the work was outstanding, and we wholeheartedly endorse them for any future contracts of a similar nature. One specific area where Clement excelled during the early stages, was the support we received from them during our discussions with the city planners regarding the bespoke windows. Their contribution proved very useful in moving matters forward and the end result is exceptional.“

In 2015, Roger Stretton, an architect and one of the foundersof the practice Berman Guedes Stretton, and Martin Smithcollaborated to bring to fruition their shared enthusiasm forcontemporary, cutting edge, environmentally-friendly residentialdesign.On an attractive, mature garden site near Dorchester in Dorset,two 2,100 sq ft detached, two-storey houses were designedaround south facing courtyards with a one-and-a-half storeyheight living room.When designing the properties, environmentally responsiblematerials, products and processes were at the forefront ofthe specification. To this end, incorporating renewable andinnovative technologies, such as air-source heat pumps and heatrecovery ventilation systems enable the buildings to be highlyenergy efficient.Having previously used Allgood products, Roger recognisedthe brand for its quality and reliability, and consequentlyspecified Allgood’s Alite lever handles and Allgood doorsetsfor the project. He explains, “The new houses have a modern,minimalist design, so it was essential that the ironmongery anddoors complemented this approach, Allgood’s stainless steel Alitehandles and bespoke finished doors met these requirements.”To complement the interior architecture of the buildings, Allgoodsupplied doorsets incorporating fully fabricated and finishedflush doors with rebated frames to create a perimeter shadowgap. An important design feature was a clear line of visionthrough each house along the main axis of the plan. To achievethis, four special, full-height glazed doors with glazed side panelswere supplied. In addition, two 30 minute fire resisting doorswere also specified to the plant-rooms.Arriving on site, factory painted and with hinges and locksalready fitted, the Allgood doorsets provide valuable savings intime, cost and waste as well as a higher quality finish.

A bespoke timber side sliding sectional garage door by Rundum Meir has proved to be the perfect fit for a private collector of classic 1950s Humber cars.After moving into the period property around six years ago, the owner was keen to redevelop the unloved garage to create a space for housing his collection of mark IV B Humber Super Snipe cars. Having purchased and maintained four of these specific models over the past 15 years, he wanted to ensure the new garage would reflect the beauty of the vehicles as well as mirror the period architecture of his 1910-built home.The vehicles are now housed in a garage accessed via an automated timber side sliding sectional door, featuring glass apertures, designed, manufactured and installed by Rundum Meir UK. The six-section door spans 4m to provide easy access to the garage and painted in a high quality black finish to achieve a period look.The homeowner said: “We’re delighted with our new garage and thankful to Rundum Meir for the sliding doors which have made the dream a reality. When we started on the project we researched numerous garage door types, but we struggled to find one that was out of the ordinary, automated and available in the stable-door style we sought.“Danesch and the team at Rundum Meir were fantastic. Following an initial visit to our home, they helped us explore the options within our available budget and the door that they proposed was perfect. With the windows, it is great to be able to see our Super Snipes in all their glory with ease."The side sliding sectional door installed here demonstrates how Rundum Meir is able to develop a bespoke solution for most applications. All its doors are designed in the UK, hand crafted in Germany and assembled back in the UK prior to installation.

Working with architects, Broe & Co LLP, Style was specified to install a new folding wall system to the ground floor of the Bloomsbury Street Day Nursery in Brighton, creating a flexible environment where children are encouraged to learn, play and explore at their own pace.Allowing nursery staff to separate the room into two, Style recommended a Stylefold acoustic glass folding wall with a 44dB Rw rating, ensuring that activities either side of the wall can take place undisturbed. By choosing a glazed folding wall, staff can maintain a watchful eye on the children and the area continues to enjoy an airy and open feel, even when the wall is in place.This manually operated folding wall is light and simple to open and close, encouraging staff to change the room configuration to suit daily activities. The pass door means the wall can remain in place for longer periods if desired without hindering access between rooms.“For schools, day centres, and community halls the Stylefold folding wall is a really effective solution,” said Michael Porter, Style’s group sales director.“It can be opened and closed in seconds, the acoustics are superb – which means you can enjoy privacy either side, and this modestly priced folding wall solution is ideal for when budgets are tight.“A folding wall can also help cut energy costs by avoiding having to heat and light a large open plan area when the entire space is not actually required – something that is at the top of most people’s priorities at the moment.”As well as the glazed option, the Stylefold folding wall is also available in a variety of finishes, including painted, polished wood veneer or a wide range of standard or high-pressure laminates.It can also be installed with writeable white board panels, which is ideal in a teaching environment.

As one of the top 100 universities in the world, Glasgow is continually investing in its facilities. One of the most significant developments in recent years was the opening of the £90m, state-of-the-art James McCune Smith learning and teaching hub, with space for over 2,500 students. Working with architects, HLM, and contractor, Multiplex, Style was specified to install a fully automatic, Skyfold moveable wall to divide the hub’s cavernous lecture theatre.Skyfold is a world-leading vertically rising moveable wall that is uniquely housed in a ceiling cavity when not in use, meaning that it is completely hidden from view and takes up no room space at all.At the push of a button, it descends gracefully into position, dividing the lecture theatre into two separate rooms with an incredible 51dB acoustic rating, allowing lectures and events to take place either side, completely undisturbed.“This is a really impressive moveable wall system that delivers on all fronts – practicality, acoustic performance and aesthetics,” said David Louden, Style’s director for Scotland.“It takes less than 5 minutes to divide the room and as you watch it descend into position it really is a truly magnificent mechanism for dividing space. Its ability to cater for stepped lecture theatres is also a huge benefit as that can be a limiting factor with many other types of moveable wall.“Once in situ, the acoustic seals are automatically applied to the correct pressure, offering the optimum acoustic barrier, and the painted steel finish is the perfect complement to the bright, open atmosphere of the room.“With space being an issue for all Universities, this is a superb solution for quickly dividing the lecture theatre into two, enabling them to cater for varying numbers of students and classes each week.”Style is the exclusive UK partner to Skyfold, Dorma Hüppe and SWG, offering an extensive portfolio of moveable, folding and partitioning walls for all requirements and budgets.

Flagship of the University’s Science Central site...The building is a living laboratory dedicated to the aim of making urban centres more sustainable for future generations.We were contracted to supply & install various major acoustic elements required on this project. From the get go, our client and architect loved Soundis Absorb-R WoodTec range due to their versatility, and the fact we were able to manufacture the products exactly to the project specific specification. One of the Soundis products from the range were the Absorb-R Micro Perforated Timber Panels which were located and installed on the curved rear wall of the auditorium. The timber core panels were faced with Micro Perforated Formica and the client decided upon the colour red which contrasted the other products within the auditorium tremendously. Another major element of our acoustic package were the Absorb-R WoodTec Grooved Timber Panels which were installed within the main classrooms and smaller teaching spaces to provide excellent working spaces for the students by reducing reverberation times and enhancing the quality of Soundis within the areas. The panels in these areas were RAL painted to the colour chosen by the architect to provide the envisaged aesthetic look and feel of the spaces. Finally Soundis Absorb-R WoodTec Timber slats were installed not only on the walls of the corridors and staircases from ground level all the way to the third floor but they were also used as freestanding dividers in large open atrium and circulation spaces throughout the Learning and Teaching Centre. These timber slats were manufactured the exact specification of what the architect wanted to create a modern but sophisticated look within the newly constructed building. All installation carried out by our installation partner UK Acoustics.

By their very nature of being large, open spaces with many hard surfaces, ambient noise levels in bars and restaurants tends to be high. This inevitably leads to customers talking louder to be heard and so begins a perpetual cycle of increased noise levels as everyone starts to have increasingly louder conversations. This, coupled with noise from music, kitchen machinery and HVAC services, can easily ruin the experience.To help combat the problems of reverberating sound, designers frequently specify acoustic ceilings to help to strike a balance between a lively and welcoming environment and an experience where the space is uncomfortably loud. This is important because customers’ comfort and a willingness to spend time and money is decreased in a noisy environment.A good example of this is the Chamberlain Hotel in London where sustainable and ethical designers Sibley Grove have used Troldtekt acoustic panels to counterpoint the reverberating noise reflecting from the stripped-back architecture with its exposed structural columns, ductwork and concrete surfaces. Troldtekt acoustic panels are a perfect solution for this type of venue either as part of a suspended ceiling or individual ‘acoustic clouds’. They are available in a variety of different surfaces and colours and combine sound absorption with a tactile surface. With an expected life cycle of at least 50 years and resistance to humidity and impact, they are available in various sizes and four grades, from extreme fine to coarse. The panels can be left untreated or painted in almost any RAL colour. Depending on the panel specified, reaction to fire is classed in accordance with EN 13501 as B-s1,d0 or A2-s1,d0 respectively.Founded on the Cradle-to-Cradle design concept and having attained Gold certification, Troldtekt wood wool acoustic panels are manufactured using wood from certified forests (PEFC™ and FSC®C115450) and can contribute positively to a building’s BREEAM, DGNB or LEED points.

The Sash Window Workshop were contacted to replace the windows and doors in a property in the Cotswolds, as part of a large renovation project of the property.The majority of the existing windows were 2 over 2 sash windows, but these didn’t suit the style of the property home so they wanted to get an idea what other styles of sash windows would look like to restore the property to be more period appropriate.After discussing with the customer, a quote was sent across for replacement 6 over 6 sash windows, new casement windows and new doors.When proceeding with the work, they decided to split the work required across several separate orders between October 2020 and July 2021.As the property was in a conservation area and the windows were not being replaced like-for-like, they obtained planning permission for the new windows. After the order was placed with us, we sent across detailed drawings to accompany their planning permission request.The door and windows were then made to their exact requirements in our workshops in Berkshire. They were manufactured in Accoya, which comes with a 50 year anti-rot guarantee, and were finished in a bespoke semi-gloss paint.After the windows and door were manufactured, they were installed by our skilled fitters. In total, across all the orders, 1 complete new window and 2 complete new French doors were manufactured and installed, along with 24 sets of windows having new sashes manufactured and installed into the existing window frames.Since completing the work, the customer has commented that the product and service was excellent and noted that they would recommend us to others. They have also since placed another order for additional work.To obtain a quote for your project, call us on 01344 868 668.

11,500m2 of Optima TFC+ in 3.0mm Aluminium PPC Interpon D2525 YW206F, Y4312I, Y4317I has been used in the completion of Abbey Place in London.Sitting within walking distance of Cross Rail station, with excellent links to central London, the development comprises two energy efficient residential buildings, one standing at 22 storeys, and the other at 12 storeys.Optima TFC+, Sotech’s through fixed cassette rainscreen, was selected as the perfect solution for creating the three-sided vertical and horizontal column units, whilst maintaining optimum system performance.To validate system performance against the project specific loads and panel profiles, Sotech undertook many FEM studies to ensure the system performed in line with expectations. This also ensured that the correct number of stiffening members and the appropriate fixing requirements were dealt with prior to the project commencing, ensuring a smooth flow of information.The Interpon D2525 Stone Effect range was selected to provide GRC and Natural Concrete look-a-like finishes. Along with the metallic YW206F, all finishes are Qualicoat Class 2 approved and offer an A2-s1,d0 fire rating to the façade.Abbey Place is a development of 245 new homes across two buildings. Linked by a shared communal garden, the new homes provide quality housing, with connections to central London and beyond via the Elizabeth Line.Optima TFC+ has been fire tested to BS8414-2:2015, and classified to BR135 for high rise buildings. A full range of Euroclass A1 and A2 – s1,d0 panel materials from 2mm – 4mm are available. Click here to learn more about the materials and finishes available, and to explore 3D models of the system in Sotech’s virtual showroom.Aluminium PPC is a type of dry coating, rather than a conventional liquid paint, and is applied to metal rainscreen as a free flowing, dry powder. The powder is applied to rainscreen panels electrostatically and is then cured under heat to allow it to form a ‘skin’. This electrostatic powder process means we can ensure complete coverage of the panels, even on more complex shapes.Powder coating can produce a much thicker coating than conventional liquid coating leaving PPC rainscreen cladding with a hard finish. This is much tougher than normal paint and its strong abrasion and corrosion resistance properties make it extremely durable and long lasting.TESTIMONIALS James Harris, Managing Director at OCL said: “Sotech are long-term supply chain partners of OCL. At Abbey Place Sotech once again provided a first class service from start to finish.The façade was originally specified as GRC, but with early engagement and a collaborative approach, our respective teams were able to come up with a look-a-like solution, using the Interpon D2525 Stone Effect range, which was both cost effective and aesthetically appealing.The completed scheme looks exceptional and is a testament to all involved” Craig Skidmore, Radan Programmer at Sotech, said:“Abbey place was a great job to work on, utilising both of our punch machines. For the complex parts we punched them on our Pullmax punch machine. On our Salvagnini S4 & P4 the standard TFC+ parts flew through our production line using parametric programming it was great to see the line work so efficiently on this job.” Jamie Brown, Business Development Manager at Sotech, added:“Like the rest of the industry at the time, we were facing considerable cost increases across the board. It was therefore vital that we engaged a supply chain that could offer us cost certainty and could confidently meet the clients programme and keep up with demand throughout. The outcome is another amazing project delivered with OCL Facades. The quality of work from early stage design to installation was exceptional by the OCL team. A massive thank you to our supply chain for their continued support. The two buildings look fantastic!”

ChallengeContractors Guaranteed Asphalt (GA) faced a unique conundrum regarding the insulation of the roof of the O2 Arena, the centre piece on the site of the former Millennium Dome and the first purpose-built music venue in London since The Royal Albert Hall in 1871.As the area required superior acoustic properties, a rock mineral wool product was the obvious solution, however the split-level roof form of the construction meant that loose mineral wool fibres were visible in the surrounding airspace. This is where Knauf Insulation’s technical expertise became invaluable! Knauf Insulation was able to specify a bespoke white-tissue-faced Krimpact product which entrapped the loose fibres.SolutionKnauf Insulation supplied over 100 tonnes of their Rocksilk® Flat Roof Slab Extra at 150mm (2x75mm), a consistent, high density rock slab with superior impact and compression resistance. This material is designed to offer not only the acoustic performance required by such a venue, but also good thermal resistance and an excellent fire rating classification (Euroclass A1 non-combustible, the highest level possible). The white-tissue-faced product was suitable to be exposed to the elements, and later sprayed with a grey solar reflective paint to seal the surface and enable the product to camouflage into its environment.To make the project even more complicated, the cranes used in the production did not fit under the existing structure of the Dome which meant that the roof had to be constructed at ground level and lifted into its final position. This was no problem for Knauf Insulation thanks to its innovative Supakube delivery system, which meant the product could be delivered to the correct area of the project with minimum effort. Supakube uses advanced compression technology and strong packaging materials, which ensures the product is not only easy to store but can be delivered more efficiently saving time and reducing carbon emissions from delivery vehicles as more product can be loaded onto each lorry.

BACKGROUND: The Pavilion was being refurbished, ready to be re-open as a new café to help increase tourism to the town.Plans included creating a new terrace at the front, a small rear extension, and a portable office/store at the back.REQUIREMENT: A modular ramp to the terrace for pedestrian and wheelchair use. END RESULT:Our installers fitted a Rapid Ramp, which included a pedestrian walkway with a loading capacity of 1,000kgs. It is designed to safely support the weight of varies public traffic, including walkers, prams, wheelchairs, and mobility scooters.The installation was completed within a few hours on a snowy late evening.FEATURES INCLUDED: Mesh Platform - self-draining mesh allows water to pass through rather than collect on the surface.Trombone Ends - these are added to the ends of a Rapid Ramp to prevent clothes catching.Telescopic Legs - these can be adjusted to accommodate threshold heights.Continuous Handrail - this handrail system ensures users always have a support to hold onto.Standard Colour Black - ramps are powder-coated black to create a hard finish that is tougher than conventional paint.EXTRA FEATURES INCLUDED:Infill Handrail - this product prevents users from climbing or falling through gaps.Yellow Tread - this is a safety feature designed to help those with impaired vision identify the nose of the ramp and helps users distinguish any level changes.CONCRETE VS PEDESTRIAN METAL RAMP INSTALLATIONS:Unfortunately, newly poured concrete must be protected from freezing for the first 24 to 48 hours and requires drying time before use. Therefore, concrete installations are heavily reliant on good weather conditions, and cannot be completed in snow or frozen temperatures.Unlike concrete, our pedestrian ramps can be installed in most weather conditions, including snow. Plus, the product is manufactured from galvanised steel.Galvanising is a process where a protective coating of zinc is applied to prevent rusting and to kill moss.

Players at Macclesfield FC enjoyed a speedy win thanks to the help of Styccobond F58 PLUS. The ‘no time to wait’ adhesive made quick work of the installation of LVTs and rubber floorcoverings as part of the creation of a new state-of-the-art gym at the Leasing.com stadium.  Flooring contractors began the project with a subfloor moisture test, which indicated high Relative Humidity (RH) levels in the subfloor, necessitating a moisture management solution to prevent excess subfloor moisture attacking floorcoverings and adhesives, potentially causing floor failure. Having removed surface laitance and old paint from the concrete subfloor on the lower floor, the contractors carried out surface repairs using Stopgap 460 Exterior Repair fast-setting rapid repair mortar. A single coat of Stopgap F77 waterproof surface membrane created a barrier against the excess subfloor moisture. Once the waterproof surface membrane had cured, the surface was primed using Stopgap P141 primer for non-absorbent surfaces before the company’s Red Bag self-levelling compound was applied at a thickness of 3mm to provide a perfectly smooth base for floorcoverings.   Styccobond F58 PLUS was used to affix charcoal-grey, wood-effect Kährs Calder Herringbone LVTs to create a bold statement in the main weights, cardio and boxing rooms, and changing areas.  Throughout the gym, rubber floorcoverings were also installed at fitness stations, using the adhesive in its wet state, to provide a soft cushion underfoot for customers using the equipment.  Upstairs, contractors made necessary repairs, including filling day joints, before priming the subfloor, this time opting for Stopgap P131 general purpose primer. Due to high RH readings contractors applied Stopgap F78 waterproof surface membrane. Once cured, Stopgap Red Bag self-levelling compound was again used to create a base for subsequently installed LVTs, completing a premier workout area for strength and resistance and cardio machines.

The Progressive Players were founded in 1920. In 1939, founding members Ruth, Sylvia and Hope Dodds generously provided the money to purchase a vacant site facing Saltwell Park, together with adjoining No.3 Saltwell View, and build the Players’ own theatre.The Little Theatre is believed to be the only playhouse built in Britain during World War II and to this day it remains Gatehead’s only theatre. It opened with a performance of ‘A Midsummer Night’s Dream’ in October 1943 and since then the site has remained home to the Progressive Players who now produce ten plays a year.Closed during the pandemic, funding was completed on an extension, creating a new rehearsal room above the auditorium known as ‘The Studio’. This facility has exactly the same dimensions as the main auditorium stage meaning the transfer from rehearsals to final production is much smoother than was previously possible.The new space is acoustically isolated from the auditorium and stage allowing rehearsals to proceed even during a performance and was designed to be in keeping with the look and feel of the original theatre. Fitted with modern lighting and sound systems, the rehearsal room has the latest connectivity and networking capabilities. New steel windows were required to replace the originals at the theatre. Clement W20 steel frames were chosen, polyester painted in Jet Black (matt). The two modular bay windows at the front of the building are particularly striking and the choice of glass was important.  SunGuard SuperNeutral 62/34 was chosen for the outer pane, offering very high natural light transmission while ensuring energy savings through solar protection and thermal insulation, krypton gas was used for the centre of the pane and 4mm of toughened Planibel Grey was used for the inner pane. The newly refurbished Little Theatre will not only be used for the Progressive Players' rehearsals, visiting hires and local community groups, but it is also hoped that it will eventually accommodate a youth theatre group.Photography taken and provided by Robbie Carruthers, Chairman, Little Theatre.  

Project description: 8 skylights - Repair and Re-glaze in Georgian wired obscured glass.The units were in an awful condition as you can see from the pictures, showing extensive rot. All of them were stripped back to bare wood, the putty removed and glazing taken out. We then used a Sadolin Super Dec in white to bring in the parts under the window and replaced the hooked with more tradition lead ones.  Once puttied, we removed the tape as to give it the best possible line before it dried (Timbabglaze is normally paintable after just 1 hour). Once dry we re-masked and used a Dulux UK weathershield system. This was a supergrip primer, oil based Dulux weathershield under coat and finally 2 top coats of Dulux weathershield gloss. The tape was removed and you have the finished product for the first 6 windows.The last 2 windows proved to be a problem. They had been re glazed previously but had been done very badly. The wood was rotten and had to be repaired. After struggling to get the glass out as it had been silliconed in... We used Timbabuild products again. To start with we raked out all the rotten wood back to a hardish part. We then used a Timbabuild 2 part EWS wood primer to give the wood some structure and a base for the next part. Once the EWS had gone off we applied Timbabuild EHB60 epoxy repair. This was left over night (as it was applied last thing in the day) and sanded back to an edge the following day. We then used the Timbabuild ERC10 Rapid curing epoxy adhesive over the top to fill any gaps that needed it. Then a surface layer of 2 part Timbabuild FINISH. They were sanded using a 180 grit paper and received the same paint system as the other 6 windows. The glass was replaced as well as the hooks and the finished results speak for themselves. 

Green Square Accord constructed the first virtually plastic free homes in Europe in 2022. 12 Apartments were constructed on the site in Redditch. In-Design & LoCaL Homes worked to find innovative and practical ways to not only reduce plastic use in construction, but to virtually remove the use of plastic in the entire design. The homes feature innovative components including wiring made with mineral insulation and Graphenstone paint which will absorb 10kg of CO2 and does not give off Volatile organic compounds (VOCs) which can be damaging to the environment and may have health implications. The homes are closed panel timber framed with a MVHR system using natural materials in kitchens and bathrooms including sisal flooring. Our closed panel timber frames reduce carbon used in manufacture and the timber comes from sustainable forests to reduce net carbon emissions. Our panels are also quick to install reducing emissions from construction. This, combined with our factory process which ensures that any waste is recycled where it can be, makes our houses as sustainable as possible. Arden Windows Ltd of Coventry were selected for the manufacture, supply and installation of the windows and doors for this project. Arden are fully certified to ISO9001 and ISO14001 and were able to meet the high thermal and security specification requirements of this project with ease incorporating Triple Glazing, and their Secured By Design certified system. Arden were able to demonstrate their sustainability credentials and low embodied carbon throughout the production process. Arden only use sustainable FSC® timber in the manufacture of their windows and doors, meaning the timber used is fully traceable to the source forest and any harvested trees are replenished. Timber window frames are Carbon Neutral over their lifetime and are a great way to reduce carbon footprints in construction. Furthermore Arden offset carbon by burning waste wood and sawdust to create heat for their factory and all products are supplied fully finished using water based coating systems. 

Although sustainable building is on the rise, large quantities of the harmful substances in some building materials still manage to slip through into new and refurbished buildings. In a new online theme from Troldtekt A/S, experts present their views on material health and indoor climate – and possible solutions to the challenges.   This problem exists because material health does not always have the same concern as, for example, acoustics, ventilation or daylighting. In an interview with Martha Lewis, head of materials at Henning Larsen Architects, the theme focuses on the health of building materials and their influence on indoor climate.  The theme also features inspiration from some European buildings which excel at being verifiably healthy and have Troldtekt acoustic solutions incorporated into their architecture. For example, it features the newly opened C2C lab in Berlin where all the materials meet the Cradle to Cradle Design criteria. These are valuable and much more detailed calculations than are available elsewhere.   Troldtekt, a leading developer and manufacturer of acoustic ceiling and wall solutions which contains no deleterious materials, wants to be specified for buildings that are healthy for their occupants. This is why the company is working strategically to support the third UN Sustainable Development Goal – ‘Good Health and Well-being.’ In practice is because their products contain no deleterious materials. This theme also explains how the recognised DGNB Certifications focuses on the health and comfort of building users. Specified throughout the UK and Europe, the benefits of 100% Troldtekt natural wood wool panels include high sound absorption, high durability, natural breathability, low cost life cycle performance and sustainability. Available in various sizes and in four grades from extreme  to coarse, the panels can be left untreated or painted in virtually any RAL colour. Samples, case studies and technical information are easily sourced from www.troldtekt.co.uk (tel 01978 664255) while information on Troldtekt’s building health theme can be found at https://bit.ly/2X50oS6Photo: Copyright: ©Kirstine Mengel.

Skyfold has launched a pioneering, fully automatic, moveable wall solution into the UK.The Skyfold Prisma, which is exclusively available from leading moveable wall specialists, Style, is a new and streamlined glass vertical partition which not only allows light to shine in but does so without the use of any wall or floor tracks, rendering it completely invisible when stored in the ceiling.“This is a real breakthrough in moveable wall technology from our global manufacturing partners, Skyfold,” said Style’s group managing director, Julian Sargent.“As a fully automated, acoustic glazed moveable wall that stacks into a ceiling cavity, its slim metal frame, clean lines, and sleek design will add elegance and an abundance of light to a wide range of rooms. We see demand being very strong in the corporate, hospitality, education, healthcare, religious and public sectors.”Skyfold Prisma's glass panels combine with a minimalist frame to allow light penetration into otherwise dark rooms and corridors, creating an open plan feel to any area, positively impacting both mood and productivity.With an impressive 52 Rw dB acoustic rating, Prisma also delivers privacy between divided spaces, allowing confidential meetings, classes, and collaborations to occur simultaneously. With space always at a premium, the panels of this innovative new partitioning wall cleverly ‘taper’ down into position, making it suitable for restricted areas or where there is potential for obstructions. Further maximising space, when not required, the partition can be quickly retracted into the ceiling cavity where it is neatly stored, completely out of sight. Skyfold has announced that Prisma is available in a variety of materials including glass, frosted glass and solid panels, with almost any combination being possible. Solid elements can be finished in fabric, vinyl, paint, laminate or even marker-board, allowing a true showcase feature to be created that is both superbly aesthetic as well as highly functional.

Skyfold has launched a pioneering, fully automatic, moveable wall solution into the UK.The Skyfold Prisma, which is exclusively available from leading moveable wall specialists, Style, is a new and streamlined glass vertical partition which not only allows light to shine in but does so without the use of any wall or floor tracks, rendering it completely invisible when stored in the ceiling.“This is a real breakthrough in moveable wall technology from our global manufacturing partners, Skyfold,” said Style’s group managing director, Julian Sargent.“As a fully automated, acoustic glazed moveable wall that stacks into a ceiling cavity, its slim metal frame, clean lines, and sleek design will add elegance and an abundance of light to a wide range of rooms. We see demand being very strong in the corporate, hospitality, education, healthcare, religious and public sectors.”Skyfold Prisma's glass panels combine with a minimalist frame to allow light penetration into otherwise dark rooms and corridors, creating an open plan feel to any area, positively impacting both mood and productivity.With an impressive 52 Rw dB acoustic rating, Prisma also delivers privacy between divided spaces, allowing confidential meetings, classes, and collaborations to occur simultaneously. With space always at a premium, the panels of this innovative new partitioning wall cleverly ‘taper’ down into position, making it suitable for restricted areas or where there is potential for obstructions. Further maximising space, when not required, the partition can be quickly retracted into the ceiling cavity where it is neatly stored, completely out of sight. Skyfold has announced that Prisma is available in a variety of materials including glass, frosted glass and solid panels, with almost any combination being possible. Solid elements can be finished in fabric, vinyl, paint, laminate or even marker-board, allowing a true showcase feature to be created that is both superbly aesthetic as well as highly functional.

Troldekt’s wood wool acoustic ceiling panels have made a major contribution to the Enterprise Centre at the University of East Anglia. Dubbed the greenest building in the UK, it is also one of the most sustainable. It is recognised as the first large scale project to target both Passivhaus Certification and BREEAM Outstanding and one which meets the highest energy and environmental standards. Designed by sustainable architects Architype, in collaboration with contractor Morgan Sindall, it is a great signal for clever thinkers and designers to be equally inspired in their choice of materials. The rationale behind the decision was to make the Centre a live and educational demonstrator of the performance of renewable materials. Here it would be possible to see any changes over time and to understand their impact, including energy efficiency and carbon offsetting. The building has become a classic source of knowledge for designers and builders. The more they are informed of the environmental impact on their own projects and the options available to them, the easier it becomes to break with convention and design something innovative using traditional natural materials.  In addition to the Troldtekt wood wool panelling, good examples from this project include the interior glulam beams which make up the main timber frame and the thatch for the wall panels which is an innovative system comprising hundreds of straw cassettes. This makes the Centre the largest exterior thatched building in Europe with one of the finest interior acoustics for learning and study.  Founded on the Cradle-to-Cradle design concept, Troldtekt’s natural and inherently sustainable panels are available in a variety of different surfaces and colours and contribute positively to a building’s BREEAM, DGNB and LEED ratings. In addition to their high sound absorption and tactile surface, they offer high durability and low cost lifecycle performance. Available in various sizes and in four grades from extreme fine to coarse, the panels can be left untreated or painted in virtually any RAL colour. Samples, case studies and technical guidance is available from tel 01978 664255 or Troldtekt.co.uk while more information about the project can be found here at http://bit.ly/troldtekt-uea1

Patalab architects were commissioned to convert an intriguing building off Acton High Street in the London Borough of Ealing into a new certified school for children with Special Education Needs and one with a special focus on pupils with severe autism. Snowflake School is an Ofsted-outstanding teaching environment in a building which was originally a purpose-built hall for the Salvation Army before being turned into an animation studio. Inserted steelwork mezzanines over a herringbone-floored hall contributed to a mishmash of conversions. Given the nature of the school and the links between autism and noise sensitivity, Troldtekt’s acoustic wood wool panelling was specified to minimise sound reverberation and to promote a healthy sound environment and calmness.Project Architect Sophie Fuller explains “The double-height central space works really well as the school’s main hall. In order to minimise sound reverberation, we chose to clad the upper half in acoustic panelling made from wood wool. The texture and neutral colour of the panelling also help to make this tall space feel friendlier and warmer.” Following design guidelines, as well as meeting fire protection and safety requirements, meant many aspects of the building’s history had to be covered although glimpses remain. For example, the original parquet floor used in the assembly hall, original metal handrails protruding from new plywood balustrades and relocated doors as internal windows. At the same time, ramps and a platform stair lift have been added to create accessibility. Founded on the Cradle-to-Cradle design concept, Troldtekt’s natural and inherently sustainable panels are available in a variety of different surfaces and colours and contribute positively to a building’s BREEAM, DGNB and LEED ratings. In addition to their high sound absorption and tactile surface, they offer high durability and low cost lifecycle performance. Available in various sizes and in four grades from extreme fine to coarse, the panels can be left untreated or painted in virtually any RAL colour.

An award winning, 42-home cohousing development in Orchard Park, Cambridge, Marmalade Lane is recognised as a leading example of best practice. To bring the scheme to fruition, TOWN, with its partner Trivselhus and supported by Mole Architects, was selected as the preferred developer by Cambridge City Council and Cambridge Cohousing. Much of the scheme’s aesthetic appeal is due to the use of three Vandersanden bricks: Majestic, Nevado Grey and Old Windsor. Cohousing is a mutually supportive form of living that is well-established in northern European countries and which is gaining in popularity in the UK. At Marmalade Lane, in addition to self-contained, privately-owned terraced and apartment homes, the community shares many spaces and facilities. These include a ‘Common House’ at the centre of the development and a car-free street that is the social heart of the scheme – a place for people to socialise and for children to play.  Marmalade Lane is one of the largest examples of group custom build in the UK so developers TOWN and Mole Architects worked closely with the future residents through a process of co-design from the start. “With a menu-based approach to dwelling customisation, purchasers were able to select their chosen brick colour from the palette of the three Vandersanden bricks plus the option of a white painted brick facade,” explains Meredith Bowles, director at Mole Architects. “Giving residents who committed to live in Marmalade Lane early on, a choice of the brick facing used for their homes was important," believes Neil Murphy, founding director of TOWN. “It has both endowed the place with a strong sense of ownership and has created a streetscape that echoes the ordinary historic Cambridge streets with their patina of age. The choice of Vandersanden bricks, with their good texture and colour, really brings the scheme to life.” Although Marmalade Lane is on the periphery of Cambridge, the aim was to give the scheme a quality that is found in the brick colours of the attractive streets in the middle of the city. Over time the bricks of the old houses have become sooted so the palette includes a kind of sooty grey hue, the more striking pale yellow of Georgian homes and also the red brick from the Victorian terraces; there are also a reasonable proportion of buildings where people have painted the bricks. Essentially, Marmalade Lane is a concentrated version of this collective vision. Bowles believes the choice of brick at Marmalade Lane perfectly complements this vision. “It seems to have become a Cambridge style with new developments all around now using the same mix of hues. Vandersanden’s Majestic, Nevado Grey and Old Windsor provide the ideal range of colours and offer the quality and textures that perfectly echo the vernacular. “There is a challenge in Cambridge because the planners are keen that things are built to match the local bricks but these aren’t being made anymore. The brick factor we used introduced us to Vandersanden by providing samples of the company’s bricks that showed us a lot of possibilities. These perfectly fitted the local vernacular, the overall aesthetic and the budget. It’s usually particularly tricky to find suitable grey bricks because they’re mostly double fired, so they cost, more but Vandersanden had what we needed at an affordable price,” says Bowles. The brickwork at Marmalade Lane is comparatively simple, the one exception being a few bands of projecting headers that create stripes of shadow as the sun moves across the facade of one of the apartment buildings at the corner of the site. Two mortar colours were employed with a dark mortar for the Nevado Grey bricks and a lighter, sandier colour for the Majestic and Old Windsor bricks. The Nevado Grey bricks have been employed to bring cohesion to many of the key elements of the scheme, including the flat roofed structures that house the air source heat pumps at the front of each house, the bicycle and bins stores as well as the Common House. Bowles is enthusiastic about the Vandersanden product. “It’s terrific and quite unusual to find one company with such a strong and varied range of characterful bricks. Part of the scheme’s success was finding bricks that worked and had lots of character within a reasonably modest budget. There is something special about the surface texture, patination, irregularity and the sense of liveliness that the Vandersanden bricks offer. They evoke a handmade quality found in older bricks that makes them much more attractive than so many of the bricks made today.”To find out more about the bricks used in this project or see the wide range of high-quality bricks available from Vandersanden, click on the 'View more' link.  

Paddington Square is a brand new working, shopping and dining quarter opening in 2023. The impressive transparent, glass building, also known as Paddington Cube, provides up to 50,000sqm of floor space with offices, retail units, a café, a bar and restaurants. The area underneath the building features the Bakerloo Line Underground Entrance and ticket hall.Following their work on a marketing suite at Paddington Square, Lucas Ltd were invited back to provide a full back of house painting and fit-out service across the basement, ground and first floor levels. Helmsman were delighted to assist them with the lockers in the project.The client requested laminate Z Lockers for two sets of changing rooms at Paddington Square. Between the male and female changing rooms we supplied and installed 268 Z Lockers, for 536 people. Z Lockers are a fantastic space optimising locker design, with a small footprint and maximised internal space. As one of the UK’s leading locker manufacturers, we specialise in bespoke locker design. The locker sizes requested were not our standard sizes, so a bespoke Z Locker design was created for the project at 1525 x 325 x 500mm.As the Z Lockers were for a changing room environment, a wet spec was needed. The body was manufactured from aluminium and stainless steel and powder coated in colour Ice, with the doors manufactured from solid grade laminate from Abet Laminati in colour Sand. Our laminate lockers provide a modern, heavy-duty finish, perfect for changing rooms where the lockers are to be used on a regular basis. The lockers were finished with a Lowe and Fletcher Hasp lock and black laminate number plates, an aesthetically pleasing pairing.As always, our installation team worked hard to provide the best finish to the project. We have enjoyed working alongside Lucas Ltd and look forward to seeing the Paddington Cube finished and open in 2023.If you have a project that needs Z lockers, or a bespoke locker design, get in touch today. Call on 01284 530427.

BACKGROUND: Oxburgh Hall is a moated mansion set within 70 acres of formal gardens and woodlands.A £6 million improvement project was underway at the site, with works including repairing the roof, windows, chimneys, and medieval gatehouse.REQUIREMENT: As part of enhancements, a fully compliant ramp was needed from the south entrance and chapel to improve wheelchair accessibility. SITE SURVEY:Oxburgh Hall was the first project to benefit from the Lidar scanning technology used by our site surveyors.The machine scans the whole area, including the building and terrain.Once the photographing process was completed, our CAD designer was able to plot a 3D visual of the ramp on top of the lidar model.The final CAD designs were given to the client with their quotation.The lidar modelling process helps contextualise the drawings by placing the systems in a virtual representation of the real environment; in this example, a historic setting with grass & dry terrain.We aim to carry out site surveys efficiently and within a minimal time frame. This technology enables us to continue to achieve these objectives and more.END RESULT:The two systems were installed within a week and included a compliant 1:15 gradient and width of 1500mm.FEATURES INCLUDED: Infill Handrail - this product prevents users from climbing or falling through gaps.Yellow Tread - this is a safety feature designed to help those with impaired vision identify the nose of the ramp and level changes.Trombone Ends - these are added to the ends of a Rapid Ramp to prevent clothes catching.Mesh Platform - the self-draining mesh allows water to pass through rather than collect on the surface.Continuous Handrail - this handrail system ensures users always have support to hold onto.Standard colour: Black - Ramps are powder coated black to create a durable finish that is tougher than conventional paint.EXTRA FEATURE INCLUDED:Compliant Step Unit - an ideal addition to any ramp installation, providing the access needed for able-bodied users. They can also be stand-alone units, independent of the Rapid Ramp System.

A global leader in world finance, the UK head offices of The Bank of New York Mellon Corporation (BNY Mellon), located in the prestigious 160 Queen Victoria Street building (160 QVS), London, have been recently refurbished. Partitioning expert Style was contracted to inject a high level of flexibility into the space, encouraging a positive environment by allowing the easy creation of personal work areas, divided meeting rooms and brainstorming hotspots. In the Thames Room, a large C-shaped Dorma Hüppe Variflex glass moveable wall offers 52dB acoustics, fully glazed pass doors and a stylish crittall-effect. Whilst Style’s unique working walls are installed in the Innovation Centre. Finished in a striking blue painted glass, the individual panels spin and slide along ceiling tracks, allowing freedom to segment the space into a wide variety of configurations. Elsewhere, a 59dB semi-automatic Dorma Hüppe Variflex solid moveable wall finished in contemporary fabric-wrapped panels, abuts a fixed glass wall that matches the crittall-effect of the glass Variflex, providing seamless interior design.As the world's largest custodian bank and asset servicing company, BNY Mellon is the main occupier of 160 QVS – a building which occupies an entire block and which actually has four separate postcodes! The newly refitted corporate headquarters comprises of both offices as well as a trading floor, delivering a flagship workplace fit for the future.Working with architects, T P Bennett and contractors ISG, Style was specified to create flexible space at BNY Mellon’s London offices using a blend of solid moveable walls, glass moveable walls and Style’s innovative working walls – designed for agile, collaborative space.“This is a great example of using various types of moveable and working walls to give different types of flexibility in various meeting areas and collaboration zones,” said Michael Porter, sales director at Style South.“It also highlights Style’s key strengths in the market in terms of our working walls and fully glazed pass doors, which are unrivalled and highly unique.”

Client: NHS HighlandLocation: Inverness, Scotland, UKYear: 2023Project size: 400 m²Vebro systems: vebrobound StoneAn attractive, slip-resistant alternative to tarmac was required for the outdoor areas surrounding an elective care centre in the heart of Inverness Campus.NHS Highland, one of the fourteen regions of NHS Scotland, provides physical and mental health services across the Highland and Argyll and Bute Council areas, covering an area of 32,500 km² and serving a population of 320,000 people.NHS Highland has opened a new elective care facility at Inverness Campus, a hub for world-class research and development in the life-sciences sector.The National Treatment Centre, based at the Inverness Campus, comprises an ophthalmology outpatient department, ophthalmology and orthopaedic theatres, inpatient wards, an imaging and diagnostics suite, as well as collaborative spaces, educational facilities, and office spaces.Not only does the centre cater to local needs, but it also goes beyond by fostering innovation and research, enhancing the scope and impact of clinical services provided.Vebro Polymers has supplied vebrobound Stone, a fully permeable, SUDs compliant resin-bound aggregate system that is ideally suited for use in public-facing external applications like hospitals and healthcare facilities. The permeable, seamless polyurethane resin bound aggregate system is designed for installation directly onto tarmac or concrete on terraces and external areas of commercial and institutional venues and delivers a stylish and low maintenance alternative to loose gravel, block paving or concrete.Available in a range of attractive aggregate blends, vebrobound Stone can complement existing structures to deliver a stunning welcome to institutional facilities such as this.Hendersons, established over 40 years ago and based in Moray in Scotland, provide first class resin flooring installation throughout Scotland.The company, who also offer a range of other services including painting, decorating and industrial cleaning, deployed their dedicated resin flooring team to transform Glenturret Distillery. Hendersons prides itself on the continual training of existing staff and development of trainees across its business, ensuring it continues to offer an unsurpassable service.

Project OverviewMount Earl Gardens is a new residential development in Streatham, South London, built on a site formerly occupied by old garages. Modular construction has been used to create a building of one, two and three storeys, creating as little impact as possible on the views from existing houses. Walkways have been designed within the block, with 'modernist' screening which allows light and fresh air into these areas whilst still keeping them safe and secure for residents. The aluminium screening runs along the length of the buildings and is also utilised in sections, including garden division screens, throughout the entire block of thirty-two apartments. To achieve the design vision, the building needed an homogeneous appearance to blend with the external red brick facade.Off-site build and finishThe client selected the perfect shade from our Landscape™ Terrain range of powder coatings - 'Original Terracotta'. All of our architectural powder coating have excellent durability, requiring minimal maintenance. Powder coating as a process brings further benefits, particularly to a modular build. The apartments were entirely built in a factory, leading to a faster installation time, less time spent on site and a 90% reduction in on-site waste. Powder coating is also a factory controlled process, thereby reducing time spent, and waste generated on site, and not dependent on weather conditions as is the case with air drying wet paint.Powdertech Corby coated nearly 3000 linear metres of aluminium which was fabricated into screens off-site and delivered to site just in time for installation.BenefitsPowder coating is an offsite process. It is factory controlled leading to improved consistency, less wastage and reduced environmental impact.The powders have excellent weather resistance and colour stability.Powdertech's rigorous pre-treatment system will help to keep the facade elements free from corrosion for up to 40-years.Powdertech plant and the operational team have the capacity to process large quantities of material within a short time frame, with no compromise on quality.

Even if your sun beds have spent the majority of the British summertime inside, it’s still vital to give them a good clean before applying any kind of finish.Net-Trol, is a fast-acting and powerful wood cleaner, neutraliser and colour restorer, that will effortlessly remove any surface or ground-in dirt on your untreated sun beds, leaving the wood looking vibrant and bright. Designed to remove all traces of weathering that have been caused by UV rays, pollution and mildew, Net-Trol’s main purpose is to prepare your sun beds for their finish.One of the great things about Net-Trol is that it is non-aggressive, so it’s harmless to your plants. We think is an essential element of any product that is going to be used in the garden. Plus, it’s biodegradable and doesn’t contain bleach or solvents.Even better, it works in as little as 15 minutes and using it should mean that you won’t need to undertake any time-consuming, backbreaking sanding. You can just sit back and relax while it works its magic.Applying Net-TrolBefore starting, you will need to wet your sun beds with fresh, clean water.Then, simply apply Net-Trol with a synthetic brush or roller and scrub your sun beds with a stiff synthetic brush.Leave it to work for 10-20 minutes. If you notice that the surface starts to dry, you’ll need to dampen it with a mist of water.If your sun beds were particularly dirty, you may need to repeat the procedure.You’ll now need to let your sun beds dry for at least 48 hours before applying any kind of finish.One of the great things about Net-Trol is that you can clean your tools with soap and water. There is no need for any white spirits!Finishing with TextrolTextrol, our penetrating oil finish developed for weathered wood, is available in 7 different colours, so you can give your sun beds a finish to suit your garden.This product has been developed so that it penetrates and protects wood from within, so it won’t form a film that could crack, peel or flake. Additionally, Textrol has in-built UV protection and will also protect your sun beds from moisture damage.As well as keeping your furniture safe from the British weather, Textrol will also enhance the natural beauty of the wood.One of Textrol’s main selling points is that it can be applied ‘wet-on-wet’, so you won’t have to wait for coats to dry during application.The maintenance is also extremely easy, with local touch-ups and no backbreaking sanding necessary.When you first apply Textrol to your sun beds, it will give them a rich, matt colour. This should gradually lighten over time to give you your finished look.Applying TextrolTextrol is applied in ‘wet-on-wet’ coats. Apply your first coat of Textrol then leave it for 15-30 minutes. This will allow time for it to penetrate into the wood but not to dry.Then, apply another coat of Textrol and leave it for another 15-30 minutes.You should repeat this process until the wood of your sun beds will not accept anymore oil. Then, wipe off any excess oil that hasn’t penetrated into the wood. This is important to ensure that you avoid shiny spots.It’s vital that you don’t allow Textrol to become touch dry between coats.That’s it – you’re done!Can I follow the same process if my sun beds are treated?If your sun beds have been treated in the past, you will need to use Aquanett or Dilunett before applying Net-Trol, in order to remove any previously applied treatments.Aquanett is our solvent-free wood oil remover, which will help to prepare your sun beds for their new coating. Aquanett is suitable for environmentally sensitive areas and as it has a gel-like consistency so it won’t run everywhere.After using Aquanett, it’s important to treat your sun beds with Net-Trol while they are still wet. This is because you need to neutralise the wood.If your sun beds have been painted, you should use Dilunett, our solvent-free paint remover, to prepare your sun beds for their makeover. Dilunett has also been developed with a gel-like consistency. This makes it ideal for use on the legs of your sun beds and underneath, as it won’t run onto the floor.Again, after applying and removing Dilunett, you should immediately treat your sun beds with Net-Trol, while they are still wet. This is to neutralise the wood.