"hot water and oil filled radiators and fittings"

St James Quarter is one of the UK’s most significant regeneration projects creating a new retail-led, lifestyle district in Edinburgh which incorporates leisure venues, hotel accommodation, private apartments, public spaces and shops.The £1 billion scheme included 1,600 of underground parking spaces. Grating panels were used within the car park to separate the zones for public access from commercial vehicles. In addition the grating provided secure openings for ventilation and the enclosure of storage areas. The panels were fabricated to exact dimensions to fit the structural openings.The panels were manufactured from Lang+Fulton’s Stereo-4, which is an extremely robust grating made with a heavy 30×4mm flat bearing bar, and supplied in a hot-dip galvanized finish.

Described by Dezer Developments and the Porsche Design Group as ‘engineered luxury’, the $560 million Porsche Design Tower is a 57 storey ultra-luxury structure occupying 2.2 acres (8,900 m2) of beachfront land on Collins Avenue in Sunny Isles Beach, Florida. The tower – the first of its kind anywhere – comes equipped with a speedy 600 ft (183 m) per minute elevator for the residence owner’s cars – allowing owners to park their vehicles right next to their apartments, no matter what floor, in their own sky garage

River Street Tower Bauder Bakor Hot Melt structural waterproofing system with mixed landscapingSynopsisRiver Street Tower is a 32 storey, luxury student accommodation situated in Manchester.Bauder Building BoardProject: River Street TowerProject type: New buildLocation: River Street, ManchesterWaterproofing: Hot MeltRoof size: 1774m²Specifier: Simpson Haugh and PartnersApproved contractor:LRL Roofing Solutions

This stunning bespoke stone staircase, created from La Roche limestone, forms part of a large project that Stoneworld have collaborated on: After digitally templating the bare concrete structure onsite, individual step treads and step risers have been cut on the water jet cutter in our masonry factory. These have then been expertly fitted by the contractor.

Location: Aldgate, LondonX Construct chose Specwall for its Minories development in Aldgate, London as a replacement for the plasterboard/blockwork system it had previously planned to use. The project was not water tight and, consequently, was subject to water ingress during works. This required a new solution which Specwall was able to provide due to it being an inert, cementitious product which can be installed either dry or wet.Additionally, the ground floor of the Minories development was an unusually busy area during construction and could not fit any extensive scaffolding works. Specwall’s single-visit construction method utilising mobile access suited these conditions and made it the perfect choice.

Dana Petroleum is an oil and gas company and the project was to refurbish their UK offices in Aberdeen. The multiple floors in this office block required blinds coordinated to specific colour themes. Silent Gliss SG 4910 were specified - 233 blinds installed, some with a screen fabric, some with a blackout option. This was achieved by installing double systems with the blackout blind to the back of the window.

Geberit’s Sovent fitting, used for the first time on an English building. A revolutionary system, the Geberit Sovent negates the need for two stack drainage, streamlining systems for tall-buildings of this nature. In addition to Sovent, Geberit Silent-db20, a waste water pipe with built in sound insulation, was installed to ensure peace and quiet for the hotel’s guests, Geberit Mapress press-fit pipe system provides general plumbing and Geberit HDPE; a long-lasting pipe with low environmental impact; delivers above-ground drainage. Plumbing systems were specified and installed by Sharpe Mechanical Services.

Our purposeOn behalf of Amye Defence Services, Acclaim Contracts Ltd was commissioned to address the aging roof of the building, which was leaking despite receiving patch repairs over the past 20 years. The Ministry of Defence’s Project Allenby/Connaught demonstrates the Government’s commitment to maintaining defence estates.The £1.45bn scheme is a 35-year commitment to providing modern, high quality, fully serviced, purpose built living and working accommodation for 18,700 soldiers. It involves the new build and refurbishment of more than 550 buildings across Salisbury Plain and Aldershot, including upgrading Allenby’s Building 51, otherwise known as the Sports Pavilion.Our solutionAcclaim turned to Langley to provide all the material necessary to complete the work. After stripping the original roof to the existing plywood deck, the team fitted new treated timber around the perimeter and new uPVC fascia. The current edge trims, perimeter check kerbs, and extended flues were removed to ensure regulatory 150mm clearance was achieved once the new roof covering was installed. Langley’s HT180 attachment layer was loose-laid and nailed into place to provide appropriate protection to the timber deck while the “hot works” above were undertaken. Langley’s TA-20 Flat Roofing System was installed across the roof area, with insulation to achieve the regulatory requirement of 0.18W/m2K. SA-20 Flat Roofing Detailing System was used in fire risk areas, in line with Safe2Torch guidance. The range of Langley’s TA systems complies with Broof(t4) classification and has a Local Authority Building Control (LABC) assured accreditation. Under MOAT 31, Langley’s Parafor 30 GS (cap sheet to the TA system) achieves a ‘resistance to damage” rating of R4. It is independently certified by the BBA to deliver a life expectancy of at least 40 years, one of the longest available in the UK.Acclaim fitted Langley’s ParaFurb Refurbishment Outlets to upgrade the internal outlets where possible, cleaning and priming those where the design precluded the use of ParaFurb. We installed New Code 5 lead pipe sleeves to flues and hot pipes to a minimum 150mm above the waterproofing. In addition, Langley’s ParaTrim GRP Edge Trim was fitted to all the kerbs.“It carried great weight with us that Acclaim worked in partnership with Langley, who offers an independent insurance-backed guarantee. That is indicative of pride and confidence in its work, giving synergy with Amey. It also gives us, and our client the Ministry of Defence, that the refurbished estate at Allenby will serve and be fit for purpose for decades to come.”Will Loates, Service Delivery Area Manager, Amey

In close consultation the decision to use DucoSun Cubic 300, combining functionality and aesthetics, was made quickly. The unique rectangular louvre blades in DucoSun Cubic 300 not only ensure that the heat from solar radiation gets absorbed efficiently, but they also give a sleek, linear accent which definitely adds architectural value. The blades of DucoSun Cubic 300 were installed vertically in front of the glass windows. Vertical solar shading guarantees maximum privacy, while still allowing an adequate outside view at the same time. Using DucoSun Cubic 300, we were able to achieve the desired aesthetics and performance requirements.

The Dyson Institute has been established with the ambition of being the best higher education engineering institution in the world. The campus radiates around the two-storey Roundhouse where 220 panels of Rockfon Eclipse® ceiling islands are installed. Rockfon Eclipse is very versatile and can be hung from several kinds of structures where traditional suspended ceilings cannot usually be installed. World leading architectural practice Wilkinson Eyre designed and oversaw the project. Hannah Richmond, “We chose Rockfon because we were looking to construct a floating, acoustic ceiling and found the Eclipse system to be the best product to realise this intent

The now disused St Margaret’s Head Tunnel was a structure originally formed as part of the Dunfermline to North Queensferry railway line, providing a link to the ferry service until the opening of the Forth Bridge in 1890 and remaining in limited use for freight until 1954. The vaulted roof and brick lined tunnel is located 15 metres below the A900 trunk road and the B981, adjacent to the northern approach to the Forth Road Bridge. Cordek were asked to supply a structural fill solution, encapsulated within a protective membrane to fill the entire cavity of the tunnel.

Cordek were tasked with providing a solution to 7,500m³ of lightweight structural fill encapsulated within a suitably protective membrane, within a restricted timeframe.

Based on a proven formulation that has been used in more than 60% of the world’s offshore oil and gas facilities, Chartek 7E was the natural PFP choice to secure the specified lifetime of this vessel. This tried-and-tested formulation is the result of AkzoNobel’s decades of technology leadership and continuous innovation, powered by unrivalled testing capabilities that allow coatings to be exposed to a wide array of extreme conditions in order to measure resistance. Combined with the expertise gathered from protecting more than 6 million square meters of steelwork over the last 25 years with Chartek 7 alone, AkzoNobel is highly equipped to provide PFP solutions to the oil and gas industry worldwide.Chartek 7 is one of the core products of the Chartek range, with a track record of over 20 years providing exceptional protection against pool and jet fires, with proven long-term resistance against fire damage and corrosion. Chartek 7E applies the same technology with a self-reinforced formula that is mesh-free, helping to achieve weight reduction through a safety-first approach.

Cordek was asked to provide a lightweight structural fill solution to raise the height of the newly constructed terraces, thus enabling additional rows of seating to be added.

DCM Surfaces installs synthetic surfacing at Butlins new pool complex in Bognor Regis.The project, which took two years to complete, accommodates almost 1,000 guests and has unique seaside and fairground-themed rides, a wave pool and a special area for toddlers.Kier was the successful bidder for the contract. Following a rigorous selection process based on quality, cost and Health and Safety, selected DCM Surfaces to install synthetic surfacing for three main areas around the complex.DCM Surfaces was in a unique position to deliver all elements of synthetic surfacing, which included the installation of an Artificial Grass safety surface, Resin Bound Gravel pathway, and Rubber Mulch, which was used to fill several tree pits. A core requirement of the installation was that each surface would be permeable, allowing water to drain through and ensure that it could be used all year round.A Rubber Shockpad was installed beneath the Artificial Grass to give children a soft, impact-absorbing layer to run and play with.The installation, completed on March 19, covered an area of over 1000 sqm.

Long house is a modern interpretation of a Derbyshire Dales longhouse and houses three generations of their respective families. It was built to Passivhaus standards and to have minimal visual impact on its rural surroundings and featured in a September episode of Channel 4’s Grand Designs. On the ground floor, a combination of floor-to-ceiling windows and a completely open-plan layout fills the house with sunlight and creates a feeling of space and tranquillity. A shared sitting room for Sarah and Mike’s mothers is known as the ‘lady chapel’ and its oversized windows provide spectacular views across the valley.Energy efficiency, thermal performance and sustainability are all key when building to Passivhaus standards. The couple were also keen to meet the Royal Institute of British Architects 2030 Challenge targets for operational energy use, water usage and embodied carbon. Durability and security were also priorities.‘The windows are the stars of the show. The whole house feels full of light and life. The views are spectacular and in every room we feel part of the landscape, but without having to put a jumper on!’

MSA Safety’s recent Height Safety Day gave nearly 100 workers at INOVYN’s Runcorn site a first-hand look at how the global safety equipment manufacturer is innovating in fall protection and brought them up to speed on the latest regulations. The information day took place at the INOVYN site in Runcorn, owned by INEOS Group, a global manufacturer of petrochemicals, specialty chemicals and oil products.

Raybloc (X-ray Protection) Ltd takes great pride in presenting our latest case study showcasing our outstanding collaboration with Singleton Hospital in Swansea. This partnership entailed the manufacturing and installation of cutting-edge radiation shielding solutions, including a Frameless Operator Screen, a wide range of lead-lined doorsets, and internal viewing windows to match. As well as these fixings, Raybloc also supplied and installed the lead-lined wall panelling to the controlled areas, making the process of lead shielding as simple and hassle-free as possible for the contractor and Trust. These advanced products not only prioritise the safety of patients and staff but also significantly enhance workflow efficiency and create a therapeutic environment.

TVS Group was tasked with the isolation of a residential property in St. John’s Wood as part of a redevelopment and basement extension. With the property in close proximity to the Jubilee line and the Metropolitan line passing only 5m away from the new basement extension, radiated noise and vibration was a serious concern for the client.An isolation layer utilising varying stiffnesses of Sylomer materials spanned the underside of the basement slab, continued up between the contiguous piled wall and the lining wall, and then across the top of the capping beam and to the side of the ground floor slab.Close work with the design team throughout the planning and specification process, provided a solution that integrated seamlessly with the structure and waterproofing detail.

A major global company selected Andel to install leak detection systems in multiple data centres, based on our approach, experience, quality and price. The end-user customer is one of the world’s leading digital infrastructure companies, providing a secure, sustainable, global collaboration platform to numerous industry-leading organisations in finance, manufacturing, retail, transportation, government, healthcare and education. The challengeThe data centres were built to the latest design specifications employing cutting-edge features and technologies. Mile upon mile of data network and power cable is installed under raised access floors where it can be organised and routed safely out of sight. The problem is that the same void, hidden from view, also contains water service pipes feeding air conditioning units, toilets and kitchens. A tailored, robust, hybrid solution needed to be installed meeting multiple requirements, primarily at low level, within the floor voids around the perimeter of the data halls with distance measuring systems monitoring CRAC units, plumbing and other plant. Additionally, a range of zonal systems provided early warning alarms and automatic isolation for water, refrigerant gas and oil leak detection.The solutionFloodline® HLD, Ranger® distance measuring system and a range of zonal senorsAndel’s Floodline® is a flexible, future-proof, zonal and distance measuring leak detection system. State-of-the-art, hybrid, Floodline® HLD multifunction control panels were installed in conjunction with Floodline Ranger® distance measuring systems and a range of zonal leak detection sensors including water, refrigerant gas and oil. Floodline® HLD control panel can monitor up to 224 zones using a combination of resistance-based and Modbus-enabled sensors.High-visibility Floodline Ranger® cable provides up to 1500 metres of continuous leak detection, detecting the presence of water and conductive liquid at any point along its entire length. Conductive-polymer technology construction makes the the sensor highly resistant to corrosion and abrasion. Sensor cable was strategically installed in floor voids to continually monitor the server halls, ensuring early leak detection through alarms and automatic valve shut-off systems.  The system triggers audio-visual alarms as well as sending onward communication to BMS. Resilient, sustainable, cost-effective, easy to install and maintain, Andel’s Floodline® is a flexible, future-proof, zonal and distance measuring leak detection system. Proactive approachPrior to installation, great care was given to ensure the customer was happy with all Andel’s Floodline® equipment and to demonstrate the superior build-quality and functionality and to allow the customer to see and handle the equipment first-hand. The customer was provided with all relevant technical specifications and user information. The project involved detailed assessment and planning for the five sites. Bespoke installation kits were manufactured in advance for each installation team. Andel put together mobile crews to visit each of the sites. The installation took 20 days from start to finish, meeting the deadline. The resultA successful leak detection installation that fulfills the customer’s brief, protecting priority servers and IT infrastructure in new major data centres. Installing Andel’s Floodline® leak detection systems now means the customer has:A cost-effective, reliable and low-maintenance leak detection system across five mission-critical sites.A bespoke, tailored solution for each site.Peace of mind with a leak detection system that will give early warning alarms and onward communication, allowing for evasive action to be taken to avoid any damage.A future-proof solution with a leak detection system where additional zones, sensors and upgrades can be added easily and cost effectively. What the customer said;We are delighted with the installation of the Ranger leak detection system across our sites. We feel at peace knowing our servers are protected with high quality systems providing realtime leak detection monitoring.Robert Gilbert, Project Manager

CHALLENGEAn ambitious project, and one of the first certified PassivHaus homes in the UK - the Denby Dale PassivHaus in West Yorkshire, had to to use 90% less energy for space heating than the average UK dwelling – with a space heating need of only 15 kWh/m2/ year. The three-bedroom property is the first UK Passivhaus to be built in a traditional style using cavity wall construction and had to be built to a tight budget of £141,000.SOLUTION“We decided to go down the cavity wall path and arrived at the design for several reasons including: planning restrictions, thermal store, cost, and maybe most important of all, buildability,” explains Bill Butcher, Project Leader.Excellent performing insulation is obviously fundamental to Passivhaus construction and the Denby Dale house has 300mm Knauf Insulation DriTherm® Cavity Slab 32 in the walls, 500mm Knauf Insulation Loft Roll 44 in the roof void (both of which incorporate ECOSE® Technology) along with 225mm of high-performing Polyfoam® Floorboard Standard* insulation in the floor.“We’re fully filling the cavity with glass mineral wool insulation for the walls above ground, because it helps minimise air movement in the cavity and offers greater flexibility, fitting snugly around the ties, openings and imperfections of the masonry surface.” comments Bill Butcher.Economics, performance, availability, ease of fitting and reducing thermal bypass were all among the benefits of the Knauf Insulation products chosen.*No longer sold through Knauf Insulation.BENEFITSGlass Mineral Wool was specified over rigid insulation to ensure a tight thermal fit. Knauf Insulation DriTherm® Cavity Slabs are flexible enough to eliminate air gaps and prevent heat loss due to their inherent ability to knit together at joints between the slabs. If rigid insulation is used and fitted badly with too many gaps, air movement around and between the insulation boards is increased, which can drastically reduce its insulation value.Knauf Insulation DriTherm® Cavity Slabs are BBA Certified for all exposure zones and formally guaranteed for 50 years to prevent the transmission of liquid water from the outer masonry leaf to the inner masonry leaf.In addition to its thermal performance glass mineral wool also has other sustainable features. In manufacture it uses a high content of recycled glass bottles and requires less overall energy consumption than some alternative products, resulting in less carbon emissions. In addition, it can be recycled at the end of a building’s life and has zero GWP and zero ODP. ECOSE® Technology further extends these established green credentials as it is manufactured with 70% less energy than traditional binders and the products contain no dyes or added formaldehyde – providing the ideal solution to the eco-friendly house.

Clement EB24 steel windows, doors and screens were the ideal choice of fenestration when it came to this jaw-dropping project in Arundel. The combination of T bars, slim, dark frames and satin chrome accessories create just the right look.Achieving such an exceptional appearance did not mean that performance had to be compromised. The 24mm insulated glass units are not only argon filled, but also include a Silverstar E glass coating. Chosen for its thermal insulation layers which lower both the thermal loss of the glass and energy consumption while allowing high light transmission.Our client explained the project and her experience of Clement Windows:“When we finally made our decision to modify and extend our 16th century, Grade II building, we knew that we had a challenge on our hands. We owed it to the history and unique position of the existing premises to choose first class materials and workmanship.Our brief to the architect was that we really needed to maximise natural light as my husband has sight issues. The building faces north, north east so this was going to be really tricky. The windows were going to be big!The search for the best then began and luckily some clients of ours recommended Clement Windows. We visited the showroom, liked what we saw and began the design and surveying process. The quality of the steel, the finish and the fit were head and shoulders above anything else that we had looked at. We wanted an unfussy, minimalist profile inside and out. Simple lines and workmanship one could trust. Clement ticked all the boxes.A few months later the team showed up to fit the glass. We did have certain logistical issues relating to access but these were overcome with good planning. At the end of two weeks, we had a home! The installation of the glass transformed a building site into an incredible, light-filled architectural space that then became the most stunning home we could ever have dreamed of living in.”

Extensive use of parapet capping from the Pendock Linea building linings range has helped improve weather resistance and aesthetics at a modern student accommodation building in Kingston-upon-Thames.Bespoke manufactured from high quality aluminium with a grey PPC finish, the flat PC-F style parapet capping's are fitted to the entire building to improve the integrity of the flat roof and stop the ingress of water.

The Priscilla Bacon Lodge in Norfolk is a new £12.5 million hospice that will provide state-of-the-art palliative care for 24 patients alongside day care facilities, a wellness centre, gym and community hub for those being cared for at home. It will also be used for education and research into palliative and end-of-life care. The facility, designed by LSI Architects and delivered by Morgan Sindall Construction, features both traditional masonry cavity walls, and a masonry rainscreen façade.  Meeting the brief At just two stories high, the building doesn’t fall under building regulations that ban combustible materials in the wall build-up. But even so, combustibility was a key factor when it came to specifying the insulation. Jordan Armstrong, Associate at LSI Architects explained: “As a practice we always try to minimise fire risk, especially for a project like The Priscilla Bacon Lodge, which will house extremely vulnerable people. So, it was essential that the materials we used were non-combustible, which meant mineral wool insulation was the only solution. “We regularly use Knauf Insulation products, so we specified DriTherm® Cavity Slab 32 for the cavity walls because it’s a high-performing glass mineral wool insulation that we expected could meet our required 0.16 W/m2K U-value. We were also keen to specify their Rocksilk® RainScreen Slab for partially filled cavity walls because then we would have one manufacturer for the whole build, and we think the products will work well together.” DriTherm® Cavity Slab 32 is full-fill insulation solution with a thermal conductivity of 0.032W/mK. While Rocksilk® RainScreen Slab for partially filled cavity walls is a rock mineral wool product with a thermal conductivity of 0.034W/mK. Both products are BBA certified for the application. In addition to non-combustibility and thermal performance, both products also offer sound reduction characteristics. Ease of installation Both DriTherm® Cavity Slab 32 and Rocksilk® RainScreen Slab contain a water repellent additive that preserves the integrity of the slabs while they are exposed during construction.  The products are also designed to be easy to install correctly. They are sized to suit standard centres for installation between wall ties or brick restraint systems. Slabs are robust so they can be manoeuvred into place while maintaining the flexibility required to adapt to minor imperfections in the substrate to prevent gaps that reduce thermal, fire and acoustic performance.  Lastly, they are both manufactured using ECOSE® Technology, Knauf Insulation’s unique bio-based binder, which contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable, and is 70% less energy-intensive to manufacture than traditional binders, so it is more environmentally friendly. The product is soft to touch, easy to handle, and generates low levels of dust and VOCs. So, when it came to specifying the insulation for the Priscilla Bacon Lodge, Knauf Insulation’s DriTherm® Cavity Slab 32 and Rocksilk® RainScreen Slab for partially filled cavity walls ticked all the boxes. 

ABODO Laminated Timber Cladding coated with ABODO Ebony Oil was chosen on this project. Being Thermally modified the Abodo product was supplied in much wider 180mm boards – the thermal modification process not only offers great stability, but also a great species to coat. The FSC Certified ABODO Cladding range offers a renewable alternative to some of the more traditional Larch or Cedar cladding that the construction market are used to.

Distributed by Britton Timbers, Accoya was selected for the louvres/external screening on the North Apartments, Blackwood street in Melbourne. Accoya was chosen due to its durability, stability and FSC certification. The 40 x 40 mm were coated using Woca external tinted Primer and an additional coating of Woca external Walnut oil. The louvers were then fixed from behind onto powder coated black material frames.

After 15 years service, the previously installed high-build coating system in this 900 m² Hyundai repair workshop was in need of some attention. Not only was the floor area damaged, dirty and drab, the risk of slips and trips across the facility was becoming problematic.After suitable mechanical preparation, repairs and infills, the substrate was coated with vebro EP OT Primer, a two-component epoxy priming product that is tolerant of residual oil contamination in concrete and cementitious floors, improving the adhesion of subsequent polymer floor systems.Chosen in RAL 7038 Agate Grey, Vebro Polymers’ high build coating system, vebrores EP HBC was able to deliver the perfect level of resistance to chemical attack from petrol, engine oils and other substances typically present in car workshop environments.The inclusion of anti-slip aggregates, encapsulated between the two coats of vebro EP Universal that make up the FeRFA Type 3 epoxy high-build floor system delivered additional slip resistance in critical foot-fall areas where rainwater may be present such as in front of the facility’s roller shutter doors, doorways and fire exits.

This project was designed, manufactured and installed by David L Douglas. The design inspiration was Scandinavian; the client wanted something completely different from the traditional look of their main house. With the exterior of the building being cladded in Larch timber, their design team decided to use oak timber internally. The main items that were finished with Oil Plus 2C, was the oak flooring, wall panelling, doors, mock beams, the staircase, and even on the dartboard housing!

Zoo Animal Enclosure Heating SolutionIn partnership with HEVAC Services Ltd of Kings Langley, Powrmatic was approached to develop a heating solution for the White Rhino’s House at Whipsnade Zoo, which saw the installation of an overhead gas-fired (LPG) continuous radiant heating system, as the previous electric heating system inside their indoor habitat was not efficient enough and heat was escaping through the timber structureProject BackgroundThe White Rhino house at Whipsnade Zoo is the home to a herd (also known as a “crash”) of seven southern white rhinos, Sizzle being the only male – the six females are; Mikumi, Bertha, Tuli, Jaseera, Fahari, and Nandi. Sizzle and Tuli are the parents of the latest baby rhino Nandi born in August 2021.The heating inside their indoor habitat at Whipsnade was not efficient enough. Localised electric heaters were spread around the large space to create coverage, but the heat was escaping through the timber structure. It was decided to upgrade the structure by foam insulation to the internals of the asbestos roof and to provide a new continuous gas-fired overhead radiant heating system providing blanket heat coverage to the complete floor area of the house.  Project SolutionHEVAC Services Ltd of Kings Langley, Hertfordshire, who undertake servicing of HVAC equipment at Whipsnade Zoo on behalf of Pareto FM for the end client ZSL (Zoological Society of London), approached Powrmatic to develop a heating solution for the rhino’s house. The brief was to provide an overhead gas-fired (LPG) radiant heating system to blanket cover the complete floor area of the rhino house, but also design it so that it could be zone controlled, should one of the herd have a need to be in an area of a higher or lower temperature.The LPG propane tanks for the heating system needed to be sunk into the earth at the edge of the rhino house to avoid having to remove any trees, thus maintaining the conservation ethos of ZSL. For a structure such as the rhino house, being the size of a large sports hall, a Powrmatic SRP-PCV+ continuous gas-fired radiant tube system comprising; 4 x 73kW burners was the proposed solution, arranged in 4 temperature zones, with the new MC400/C controller and just the one flue discharge to atmosphere.Project ResultThe installation of the new PCV+ continuous overhead radiant heating system was skilfully undertaken by HEVAC Services Ltd, with the contract programme being driven by the daily habits of the rhino herd! Whether they wanted to be in their house or out on the field. Thus, the logistics of undertaking the heating installation were unique compared to working in a standard commercial/industrial environment.The White Rhinos now have a refurbished home and a heating system that delivers radiant heat in exactly the same way that we (and the rhinos) receive energy in the form of heat from the sun. Radiant heating systems efficiently radiate infrared radiation, which is the transfer of energy in waveform from a hot surface to a relatively cooler surface without heating the medium between. Thus, the rhinos can bask under the radiant heat, whether indoors or outside under the sun.The ZSL Whipsnade Zoo White Rhino Enclosure now benefits from a highly energy-efficient Powrmatic SRP-PCV+ system, listed on the Carbon Trust Energy Technology List (ETL), endorsing the Seasonal Space Heating Energy Efficiency of; 92.1%, and thus delivering low; energy usage, fuel bills and carbon emissions minimising their impact on the environment.

Here's how Freedom has transformed Izzy's living space -Why Freedom?Freedom embraces unique features to support independent living scenarios and offers the latest kitchen trends so there’s no need to compromise on style. Key components of safety, style, storage and smart flexibility at the core of the Freedom brand, make it ideal for multi-generational living, including mobility requirements.Meet Izzy Izzy Hussain, is a full-time wheelchair user, who lives in Milton Keynes. Izzy’s new kitchen allows her to host friends and family with ease.  “I now have the freedom to cook what I want, when I want and this new style of kitchen allows me to be independent and spontaneous, which is really important for me.”Izzy’s previous kitchen wasn’t accessible. Izzy reverted to using a camping hot plate and an MDF worktop just so she had the ability to cook.Following Izzy’s spinal injury, Occupational Therapist Zoe Paye provided necessary support and helped oversee the design process and renovation of Izzy’s bungalow. Zoe recommended Adam Thomas, leading accessible design consultant and Tara Neil Kitchen Retailer to offer a tailored design service, including delivery and installation. Izzy’s Kitchen DesignAs part of an early design consultation, a few features were agreed:An Island on two levels with fixed height prep space and induction hob so Izzy can cook and entertain guests at the same time.A pull-out table, doubling up as a place to safely transfer dishes to the island and as additional preparation space.A pantry/tall larder with pull-out drawers providing easy and quick access to dried food and tins.Additional design features:A drinks cabinet as entertaining is a big part of Izzy’s life allowing her to host friends and family with ease. A NEFF Slide&Hide® oven, including heat proof resting shelf which Izzy wanted following good reviews on a Facebook spinal group. Essential storage such as pull down i-move baskets and pull-out pan drawers provide easy access to everyday items, helping Izzy to be independent. A push to open slimline NEFF dishwasher for ease of accessing crockery and kitchen utensils and a hot tap which eliminates the back and forth of filling up a kettle. Finally, a well-equipped utility room incorporating a sink to wash and groom her dogs as well as a handy pull-out dog treat drawer were a must-have for Izzy. Products featured: Freedom Alta Kitchen in gloss pure white with chrome handles. A statement worktop made from Quartzite in aurora pink.Appliances: sink with drainer, integrated hide and slide ovens and induction hob, hot tap, integrated fridge-freezer, slimline dishwasher, feature lighting and flip sockets.The Freedom brand is designed in collaboration with the Adam Thomas Consultancy. Adam is an accessible design consultant and industry expert with over 40 years’ experience. Freedom is available from selected retail partners around the UK.

An Orkney based seafood processing facility required durable, slip resistant floor coating systems for its production environments.Cooke Aquaculture Scotland is one of the leading producers of Scottish salmon, headquartered in Glasgow, with seawater farming operations in both Orkney and Shetland, and supplying national supermarket chains including Waitrose, Marks & Spencer and Tesco. Not only does the company pride itself on being the largest producer of organic Scottish salmon, Cooke Aquaculture has also established its own in-house feed division, ensuring their salmon are thriving, as well as ensuring their operations are sustainable from sea to delivery.While the strong tidal waters around the islands — the most northerly part of the UK — make for an ideal salmon farming location, transporting goods for the transformation of Cooke Aquaculture’s processing facility proved challenging. In spite of this, the installation team were able to complete the project, installing vebrocrete HF and vebrospeed Quartz over two phases across two areas of the production facility.With the production facility being subject to lots of water, both from the production processes, as well as the cleaning regimes, a suitably resistant and anti-slip finish was required to promote both safety and hygiene. vebrocrete HF, Vebro Polymers’ high performance seamless PU concrete, was chosen in Blue for the first large production area.  The system, which demonstrates excellent resistance to the effects of low temperatures, as well as hot water washdowns and associated thermal shock. The positively textured, seamless and hygienic floor coating is ideally suited to areas where a balance between intensive cleaning and slip resistance is required. For the second phase in another production area, vebrospeed Quartz was chosen to transform the floor under a fast turnaround. The attractive yet functional slip-resistant floor coating system based on fast-cure MMA (methyl methacrylate) technology, cures in as little as 60 minutes, meaning production can be back up and running very quickly. 

The recently built front extension creates a new threshold for the church, encompassing a large multipart Flushglaze fixed rooflight from Glazing Vision. The rooflight works to fill the entrance lobby with natural daylight and helps to create a lofty, open space with character.Utilising frameless rooflights to accentuate this highly contemporary home, CDC Studio have adopted the perfect balance of imagination and persistence. Designed as a ‘forever home’ for their retired clients, this house is accessible, highly contemporary, low energy, sustainable and secure.Having approached CDC Studio, to create a home which was not too big for two, but big enough to accommodate village parties and wider family coming to stay.CDC Studio replicated the thatched barn and knitted into the local community, encapsulation the character of the village through local crafts and materials of flint, red brick, timber shutters and estate fencing complimenting this with the use of zinc to echo the agricultural aesthetic of the original land use.Adopting a thoroughly modern approach, the kitchen, dining and living spaces are open plan to allow for social gatherings and to provide a smooth flow throughout the home. With three Glazing Vision secure by design flat rooflights along the roofline, natural daylight is allowed to fill the property and create an open space for the homeowners to enjoy.The kitchen sits under a column-free, steel rod hung mezzanine with acoustic damping which was rigorously engineered to avoid the reverberating noise. This creates a sense of enclosure to the kitchen whilst allowing CDC to achieve the fully flexible family / party space requested beyond.Two Glazing Vision electric Visionvents have been included to deliver a continual air flow running through the property and providing a constant temperature and source of natural daylight into the entertainment area of the home.To compliment the contemporary style of this house, a Glazing Vision Sliding over Roof rooflight has been installed, whereby the entire section of glazing retracts out onto the roof space, leaving open, unimpeded views of the sky above. When closed, the amount of glass is maximised to maintain an almost frameless appearance.“CDC Studio have been specifying Glazing Vision for a number of years and our clients have always been very pleased with the results. A combination of standard products and the option to deliver a bespoke solution means that Glazing Vision cater for all types of projects and affordability whilst products are well made and come with the addition of guarantees.” Delphine Dryer, Associate Director CDC Studio.The character of the thatched barn is emphasized by embracing its full height to the ridge, offering modest but usable guest rooms wrapped in painted timber boarding. These were identified for immediate family use, the height helping to overcome their narrow nature on plan, integrated wardrobes, back panels and pegs for hanging make them hard working spaces. A separate master suite spreads into the new volumes providing dressing, bathroom and a private patio area which offers the clients a place for quiet retreat when guests are staying.The house boasts its own private ‘Gin and Tonic’ balcony. The mezzanine space creates a private second sitting area with a concealed timber stair nestled between concrete sheer walls to provide access. It is quiet yet connected to the main space, and commands views to the west with a fully opening sliding over roof rooflight to let the outdoors in. A separate guest suite and shower room afford privacy to occupants and visitors alike.The extended roofline and orientation provide solar shading to the solar controlled west facing glazing with the careful positioning of rooflights to prevent overheating in the height of summer, plus water runoff is directed to a salvaged historical water trough which the clients will use to water the garden. The linear design is extended into the immediate landscape with water rills extending out like fingers into the wider area which over time the clients will begin to accentuate with their planting.This project showed the right combination of imagination and persistence, creating a home which not only fits in with the local village heritage but also manages to stand out and create a ‘wow factor’ for those which bask in its glory.“We have recently been impressed with their ability to comply with the secure by design requirements which not all companies seem aware of. We have used the fixed and venting rooflights on our Stacked house and Y house and a massive bespoke sliding rooflight on our Parkhouse which the clients adore.” Delphine Dryer, Associate Director CDC Studio.

Having supplied our very select E157 unfinished very wide board which is 260mm wide to the contractor we worked closely with the Crawford Partnership to create the perfect floor.We completed a large number of samples in the workshops with different oils and eventually the client settled on a special finish from Blanchon that does not change the colour of the wood but seals it perfectly.After numerous emails, we received this from Alan and following this the samples were sent.

Project: 1 Aylesbury Street, Clerkenwell, London, EC1R 0DRClient: MeritcapeArchitect: Atum Design LabM&E consultant: EngDesignProtecting Cities Against Fire with Advanced GlazingDaylight-flooded spaces command a premium from tenants, but in the densest urban areas – where buildings are very tightly packed – it can be difficult to achieve. Not least because of the need to protect against the spread of fire.This was the challenge for developer Meritcape when they set out to refurbish 1 Aylesbury Street – a converted historic warehouse building in Clerkenwell, East London.The designers wanted to fill every floor of the building with natural light, from both the front and the back of the building by using floor-to-ceiling glazing on every floor. However, the rear of the property was just three metres away from a neighbouring building.To prevent fire spreading from one building to the next, building regulations specify the fire resistance that external walls need to be able to provide. This is given as minimum requirements for integrity – how long they can contain smoke and flames – and insulation, or how long they can prevent the escape of heat. Steve Bond, technical and customer support manager, fire, at Pilkington United Kingdom Limited, said: “When you have two buildings this close together, standard glazing is not an option, as it doesn’t put up enough of a barrier to fire spreading outwards from the building.“That’s where fire-resistant glazing can make a big difference. By providing protection against fire while also letting light flow in, we can create light-filled spaces in very built-up parts of the city where not long ago it wouldn’t have been possible.“As well as sealing in flames and smoke for at least an hour, the glass also provides radiation shielding that reduces the amount of heat energy that can pass outwards through the glass – another key means of spreading fire.” The rear façade of the building is glazed in Pilkington Pyroclear® Plus insulating double-glazed units, delivering not only the right level of fire resistance, but have also been designed to give excellent thermal insulation (U-value) properties to reduce heat-loss from the building.Davood Kiani, Senior Project Consultant at Meritcape said: “Those looking for modern commercial space expect floorplans to be well lit with natural light, and this is one of the main design challenges when working with buildings in the most densely urban areas of the city.“Fire regulations are one of the big reasons for this, so Pilkington fire-resistant glazing means we can achieve the best of both worlds - a building that meets or exceeds all of the safety regulations while also feeling spacious and airy.”A total of 800 m2 of Pilkington glass was used in the project, including in the front façade of the building, in which hundreds custom-sized small double-glazed solar-control units were used to imitate the crittall steel-framed windows that are a signature feature of buildings in the area.Images by S G Photography

Wireworks London approached us looking for a modern industrialised Oak to clad onto a winding staircase in a beautiful London home. Amongst the options we presented was our CH-E780. This a White Oak with a brushed and band sawn surface giving it a clean yet worn texture. The rusticgrade Oak allows for some knotting to appear without it overpowering carefully detailed floorboards.These boards are finished with a commercial grade UV cured oil that makes it hard wearing and easy to maintain. This particular product has also been fitted throughout the busy, modern offices at 3 Shortlands, Hammersmith. It is easily one of our most popular surfaces and finishes.Wireworks didn’t want a separate stair nose component, instead opting for mitring the length of the boards to a 45-degree angle and jointing them together with a biscuit and high quality PVA glue. The effect is a stunning cascade of band sawn Oak which looks like it was purpose built in a specialist workshop or factory. This an excellent example of the ingenuity of the team at Wireworks and the adaptability of wood flooring.Would you like to see this type of cladding in using a herringbone parquet? Then please see our case study: Cladding Stairs in Engineered Herringbone Parquet

future-proofing a semi-detached Victorian home, taking the opportunity to transform the dark, unwelcoming kitchen into a light-filled modern space with Schüco ASS 70 FD aluminium bi-folding door systems.