"hot water and oil filled radiators and fittings"

There are two options to compensate for the heat loss in hot water distribution pipes: using a temperature maintenance cable or a re-circulation pipe. Which option is more sensible from an energy point of view, when using a condensing boiler for hot water generation? A study by the Technical University in Dresden addresses the question of which option is more energy-efficient.The results presented show that a single pipe hot water system that compensates for heat losses with a self-regulating temperature maintenance cable is a better solution.

Low environmental impact... CHALLENGE All over the world architects and building owners are trying to create buildings with a low environmental impact. For this private house, the architect wanted to combine an aesthetical finish of a metal roof in combination with PV and hot water panels. The biggest issue for the architect was the fixing of these panels without having leak problems in the future. SOLUTION The roof was waterproofed using a RENOLIT ALKORPLAN roofing membrane that is mechanically fastened onto the supporting roof structure. Two kinds of PVC profiles were heat welded onto the waterproofing membrane: on the one hand RENOLIT ALKORDESIGN profiles (for aesthetical value only), on the other hand there are RENOLIT ALKORSOLAR profiles, which function as the base to attach the hot water and the PV panels. The gable was also finished with the RENOLIT ALKORDESIGN system.

A major US oil company was experiencing corrosion in its sour crude oil tanks. Chemicals and water in the oil were creating severe pitting and corrosion issues at the bottom of the storage tanks. They contacted Hempel looking for a long-term protective lining solution.A poor lining system can result in substantial losses. Tanks and vessels left out of service for repair, cost owners valuable time and lost revenues. Hempaline vinyl esters have been designed to resist against acids, caustics, strong solvents, oil and water, protecting assets and maintain the purity of the content of the tank.To combat corrosion in the customer’s sour crude oil tanks we recommended our Hempaline Defend 500 vinyl ester mat reinforced to line the tank bottom and also the bottom 4 feet of the wall surfaces.The high-performance scheme was applied following grit blasting and consisted of a single coat of Hempaline Prepare 120 primer. A first coat of Hempaline Defend 500 was then applied and whilst wet, a 450 gm/m2 (1.5 oz/ft2) chopped strand mat was incorporated into the coating. Following a light sanding to remove any upstanding fibres, a second coat of chemically resistant Hempaline Defend 500 was applied.

Contacted by Tefken Construction, we designed, fabricated and supplied modular flat packs of both steel and GRP gratings, heavy duty barrier rails, gates, ladders, treads and handrails to the 'Chirag Oil Field'.Our designers ensured that all material and placements could withstand the given environment. Using both steel and GRP allowed for cost efficiencies for the client, while maintaining a great strength for their platforms and rails.Our modular flat packs allow the client to install their flooring and other items easily.Chirag is an offshore production, drilling and quarters (PDQ) platform located 120km east of Baku in the Caspian Sea, at a water depth of 120 meters.First oil from the platform was achieved on 28 January 2014.Total Chirag production was on average 53,000 barrels per day.

Owatrol Oil is a product that wears many hats; it is a rust inhibitor, a paint conditioner and it also helps adhesion of finishes.Owatrol Oil is a versatile, highly penetrating air drying oil and when used as a rust inhibitor, it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, stopping rust from doing any more damage.Using Owatrol Oil as a rust inhibitorOwatrol Oil penetrates deep, through the rusted metal to the good metal underneath, isolating it and protecting it from further rusting.As it is a penetrating oil it can be used directly on the rusted surfaces. However, be sure to remove any loose flaking rust, paint, grease or any other contaminants before applying Owatrol Oil.ApplicationUsing Owatrol Oil on new clean steelFirst prime new steel with a mix of 1 part Owatrol Oil to 3 parts primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Using Owatrol Oil on lightly rusted surfacesFirst prime the surface with a mix of 1 part Owatrol Oil to 2 parts primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Using Owatrol Oil on new unpainted rusty steelFirst prime the surface with a mix of 1 part Owatrol Oil to 1 part Primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Using Owatrol Oil on old, severely rusted or previously coated surfacesApply wet on wet applications of Owatrol Oil to all exposed rust until fully saturated and allow it to dry.Saturation is indicated by a uniform glossy appearance to the surface when Owatrol Oil is dry.Before Owatrol Oil has hardened, check the surfaces and remove rust scale and old paint loosened by the above. If needed, touch up these areas.Allow to dry.Next, apply a mix of 1 part Owatrol Oil to 2 parts primer and allow to dry. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Note: Owatrol Oil will not lift well bonded paint.

Use of NyRock Cavity Slab 032 wall insulation in a full fill application.

As business evolves and requirements change in our fast-paced world, Movawall Systems Ltd continue to bring ground breaking, intuitive products to the industry and pride ourselves in being able to create unique and bespoke systems for all our clients, whatever the application. One of our latest projects which has been installed and tested has made us particularly proud and set a new standard in acoustic movable walls.The requirements on this project were clear and simple with very specific needs for one of the leading pharmaceutical companies and we were going to tackle it head on. A movable acoustic wall with radiation protection for a research and testing environment needing to maximise flexibility while still offering the safety and protection required in a radiology environment.Our Type 100SE semi-electrically operated movable wall was developed and tailor-made for this requirement; with X-Ray protection and specialised seals to ensure the ground-breaking radiation protection and acoustic levels would be achieved. Each wall weighed in the region of circa 6 tons and the top hung system was fitted with our Type “K“ track which allows for remote and varied stacking locations. The walls varied in width and height but were all finished in Rigato Formica laminate with aluminium protective edge trims. The vision panels in the pass doors were fitted with Med-X type single glazed glass between two layers of 4mm thick toughened glass.

We’re always pleased to hear about how our products have helped customers with their renovation projects. However, we were particularly delighted when one of our Partners Roger, of R and A Pressure Washing Services, sent us these photographs of a poolside deck renovation he recently completed.The customer had previously treated their poolside deck with a decking oil, purchased on the high street. As you can see from the photo, the decking looked dull and tired and was not at all complementing the lovely rooftop views from the pool.We’ve had many customers tell us that the high street decking oils they had previously bought had failed. They were continuously having to sand and re-oil their decking to keep it looking smart. By investing in a good quality product, you could reduce both the time and money it takes you to constantly strip and re-oil your decking and replacing it with easy, low maintenance decking.Aquadecks, for example, is water-based and is easy to apply and maintain, with no sanding or stripping required. Sometimes, it’s worth investing in a more expensive product, such as Aquadecks, at the beginning, to save you money in the future.So, how did Roger rescue his customer’s poolside deck?Firstly, he mechanically sanded the deckingTo remove all the old oil from the surface of the decking, Roger sanded the decking with an electric sander. How the decking looked after sanding can be seen in the photo below.Whilst this step is often completed by professionals, for the DIYer it’s going to be easier to remove the old oils using Aquanett wood oil remover (if it’s a different sort of coating you’re removing then use Dilunett or Prepdeck).If you don’t want to sand back your decking, follow the steps below if you’re removing oils.Aquanett can be used to remove teak and other oils from all woods blackened by UV rays. It will prepare your decking for a new coating and improve penetration and adhesion. Its gel-like consistency means that it’s easy to apply.Even better, it’s suitable for environmentally sensitive areas, as it does not contain solvent or paraffin and it’s biodegradable.If you choose to use Aquanett instead of sanding, you’ll then need to neutralise the decking with Net-Trol before applying your finish.Then, he applied AquadecksNo matter how many times we see photos of decking renovations using Aquadecks water-based penetrative wood finish, we’re always really impressed with how it turns out.First of all, Roger applied a liberal amount of Aquadecks. Applying in the direction of the grain, he worked in sections that he could complete within 30 minutes.As soon as the ‘wet look’ of the first application had disappeared, Roger applied a second coat. He then allowed this to penetrate for 15 minutes.He then removed any excess Aquadecks that hadn’t penetrated the decking. This avoids it drying as shiny spots on the surface. The place for Aquadecks is in the wood, not on the surface.As Aquadecks is water-based, Roger was then able to clean his tools with soap and water.We think that the decking now looks as good as new – if not better!

With the vision being to create one of the city’s most ‘instagrammable’ offices, fit out contractor Paramount needed every product specified for the refurbishment of Dock House to be aesthetically pleasing as well as highly practical. Zip’s HydroTap and InLine ranges met the brief for all of their water needs."We pride ourselves on making places where people want to be and that’s certainly the case with our new Bristol office. We wanted every detail to reflect our vision of creating a destination workplace and this included the water provision. Zip Water could provide world class products combined with the best service so we had no hesitation in specifying their products."Kevin Marshford, Sales Director | Paramount OfficeThe briefDock House, a three storey building in Bristol’s Welsh Back, was ripe for redevelopment. Paramount wanted to create a striking office space that was flexible enough for working, events and meetings. And, taking the ground floor as their new Bristol head office, Paramount had a vested interest in designing a modern and desirable workplace which was in-keeping with its historic location. In terms of water products, Paramount wanted energy efficient water heaters for washrooms which could reliably deliver hot water whenever required. With the building being used frequently but with a low intensity interspersed with short stints of high occupancy, it was important that the systems were as efficient as possible. In addition to washroom water heaters, Paramount wanted to offer staff and visitors a sociable tea point in the communal bar area. With aesthetics and sustainability so high on the priority list, a stylish drinking water product was needed that could provide filtered boiling, chilled and sparkling water without the need for single-use plastic water bottles.The solutionThanks to an existing relationship with Paramount, Zip Water was specified to provide a number of products for this project. Washroom hot water was solved thanks to Zip’s InLine range, which discreetly provides instantaneous hot water whenever needed. Its innovative design heats water as it flows through, meaning there is no standing heat loss, just energy efficient hot water. For the bar area, Zip provided its HydroTap Classic Plus in smart matt black. This clever tap which was installed on the bar with the help of a font, provides instant filtered boiling, chilled and sparkling water. This transforms the way staff and visitors can make hot and cold drinks - and helps to encourage a refill culture within the workplace. Another benefit of the HydroTap is the enhanced hygiene thanks to SteriTouch which is embedded in the touchpad, as well as in key components of the water path, reducing the growth of bacteria by 99.99%.The results"We pride ourselves on making places where people want to be and that’s certainly the case with our new Bristol office. We wanted every detail to reflect our vision of creating a destination workplace and this included the water provision. Zip Water could provide world class products combined with the best service so we had no hesitation in specifying their products."Kevin Marshford , Sales DirectorParamount Office Interiors

The new psychiatric center in Skejby, Denmark is a construction project for 1.3 billion DKK. The center is part of the New University Hospital in Aarhus and includes an adult and a child psychiatric ward with ambulatories and rooms totaling approx. 40,000 m² and an autonomous forensic psychiatry of approx. 10,000 m². The center is approx. 50,000 m² and replaced in November 2019, the over 150-year-old psychiatric hospital in Risskov, Denmark.The project builds on the urban structure organized in a city's image, with the city's hierarchy of neighborhoods, streets and squares. One of the overall goals for the new psychiatric center was to integrate as a natural part of the existing hospital and surrounding countryside.Hudevad has been part of the planning process together with Arkitema Architects, where the focus has been on integratable heating solutions, which naturally fit into the design of the building. Among other radiators, Hudevad has supplied Integral Bench, a combined radiator and bench, which is installed in the individual rooms. Placed under the low windows, Integral Bench takes centre stage and allows residents to enjoy the changing weather and the countryside outside from the comfort of the room.

Like many workplaces, a good cup of tea is a necessity for the staff at Wiltshire Council and, after years of faithful service from their older generation Zip HydroTaps, Wiltshire Council’s drinking stations were due a refresh. A new mains-fed drinking water system was required that could meet the hot beverage demands of all the council employees, at the same time as fitting the building’s energy saving criteria.

As business evolves and requirements change in our fast-paced world, London Wall Design continue to bring ground breaking, intuitive products to the industry and pride ourselves in being able to create unique and bespoke systems for all our clients, whatever the application. One of our latest projects which has been installed and tested has made us particularly proud and set a new standard in acoustic movable walls.The requirements on this project were clear and simple with very specific needs for one of the leading pharmaceutical companies and we were going to tackle it head on. A movable acoustic wall with radiation protection for a research and testing environment needing to maximise flexibility while still offering the safety and protection required in a radiology environment.Our Type 100SE semi-electrically operated movable wall was developed and tailor-made for this requirement; with X-Ray protection and specialised seals to ensure the ground-breaking radiation protection and acoustic levels would be achieved. Each wall weighed in the region of circa 6 tons and the top hung system was fitted with our Type “K“ track which allows for remote and varied stacking locations. The walls varied in width and height but were all finished in Rigato Formica laminate with aluminium protective edge trims. The vision panels in the pass doors were fitted with Med-X type single glazed glass between two layers of 4mm thick toughened glass.

Lionweld Kennedy designed, fabricated and supplied the modular flat packed steel and GRP grating and stair treads to the 'Clair Ridge Oil Filed' for Hyundai Heavy Industries.Using both steel and GRP, we created an efficient solution for their flooring. Both materials thrive in harsh environments, which is why Lionweld Kennedy supplied an range of our products to cut down on costs, while maintaining high strength. Clair Ridge is the second phase of development of the Clair field which, with an estimated eight billion barrels of oil in place, is the largest undeveloped hydrocarbon resource onthe UKCS.The £4.5bn investment involves two new bridge-linked platforms.

The HydroTap with a tailored HydroCare plan is the perfect drinking water solution for law firm. When undertaking an office refurbishment is always a good opportunity to review your company’s drinking water supply. It’s often the case that with growth, the kettle is no longer up to the job of providing your workforce with the hot drinks they need, day after day.

Chris’s nature inspired garden sculptures are beautiful. From his small ferns to his large grass plumes, every piece is hand crafted with love and care.He offers his sculptures in two finishes; rustic and stainless steel. The rustic style has a beautiful rich brown finish, whilst the stainless steel version offers a shiny finish that reflects the surrounding areas.We think you will agree that both are stunningChris’s nature inspired garden sculptures are beautiful. From his small ferns to his large grass plumes, every piece is hand crafted with love and care.He offers his sculptures in two finishes; rustic and stainless steel. The rustic style has a beautiful rich brown finish, whilst the stainless steel version offers a shiny finish that reflects the surrounding areas.We think you will agree that both are stunning.Here’s what Chris has to say about Owatrol Oil:When I first started creating garden sculptures I tested out a range of oils and paints, looking for a finish that would enhance my work. Owatrol oil has proved to be the best, giving my rusted ferns a lovely dark satin finish. When asked, most of my clients prefer the oiled finish and it’s very easy to apply. On a sunny day I oil my sculptures in the garden and they’re dry in a few hours.When it comes to more complicated designs such as seed heads, the aerosol is great at covering the ‘hard to reach’ areas.I’ve been using Owatrol for over 5 years now, it just gives a quality finish.Chris offers a wide range of products. From garden sculptures, to fire-pit cubes and ornamental panels, you will easily find something beautiful for your garden.What is Owatrol Oil?Owatrol oil is a versatile, highly penetrating air drying oil. As a rust inhibitor it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust dead in its tracks.Owatrol Oil penetrates through the rusted metal to the sound metal below, isolating it and protecting it from further rusting. As it’s a penetrating oil it can be used directly on the rusted surfaces. It drives out moisture and air and stabilises the metal to protect it from future damage.Head on over to C K Garden Sculptures and take a look for yourself at Chris’s amazing work.

Case study of Shackleton Park project. Comprising a mix of Houses, duplexes and apartments utilising the Joule Victorum EAHP.

The ideal fire curtain when radiation tenability is of concern.

Bona Craft Oil 2K was specified for the restoration of the Beech floor in the world’s largest purpose-built recording studio. In constant use by orchestras and choruses, it was essential to choose a highly durable, quick drying finish to minimise downtime. Bona said “It was unusual for us to have to consider the acoustic properties of one of our finishes before creating this specification, but understandably this was of paramount importance for the studio team. Another beneficial property of a ‘traditional’ oil finish, is the ease with which local repairs can be made, usually without sanding.

Bona Craft Oil 2K was specified for the restoration of the Beech floor in the world’s largest purpose-built recording studio. In constant use by orchestras and choruses, it was essential to choose a highly durable, quick drying finish to minimise downtime. Bona said “It was unusual for us to have to consider the acoustic properties of one of our finishes before creating this specification, but understandably this was of paramount importance for the studio team. Another beneficial property of a ‘traditional’ oil finish, is the ease with which local repairs can be made, usually without sanding.

Leading high street retailer Marks & Spencer knows that a happy workforce makes for happy customers. The modernisation of staff catering areas in stores required replacing traditional drink machines with instant hot water taps for greater efficiency and general staff wellbeing.

The owners of a four-bedroom family home have recently converted the loft space where two Afinia aluminium radiators have been installed. Effectively warming the room while also complementing the style and design of the space, these Afinia radiators combine efficient functionality without compromising on appearances.

Well known as one of North Norfolk’s gems, not just because of its historic setting - it’s believed to be Holt’s oldest building - Byfords is the place to go for delicious home-cooked food, from breakfast, lunch and dinner to everything in between.Busy all year round with loyal locals and visitors to the popular upmarket town of Holt, Byfords is so much more than just a restaurant. On entering, guests are shown through the store, jam-packed with savoury pastries, hot food and cakes to take-away, before arriving at the striking but homely vaulted dining-cafe. Those lucky enough to be staying the night or two are shown to a sumptuous B&B suite upstairs.January 2020 saw Byfords renovate the ‘conservatory’ area of the restaurant, adding an impressive open marble-topped serving bar, behind which are positioned coffee machines and everything needed to make the ever-popular hot drinks throughout the day. One element of this key area that also needed upgrading was the water boiler. Used almost non-stop to fill teapots and cafetieres, Byfords looked to upgrade their current boiler to ensure it could meet the restaurant’s needs.General manager Richard Knights explains: “All of our kitchen & Bar products need to be able to meet a high level of demand, along with being reliable, as we don’t want to be replacing appliances every year.” Richard selected an Instanta product after researching boilers and being impressed with the capacity options and dedication to quality manufacture.A SureFlow Counter Top Filtered (CTS11F) boiler was installed, providing the cafe with up to 162 cups of boiling water per hour, with its built-in multi-functional filtration. This filtration can be adjustable for any catering facility in hard water areas to not only ensure the product isn’t affected by limescale build-up but also to keep hot drinks tasting fresh.“The team makes numerous hot drinks throughout the day,” continues Richard, “so it was vital we have a boiler that is up to the task. The tap is at the right height for filling tall teapots and cafetieres and we never have to worry about waiting for the water to be at the right temperature. As it is in a front-of-house location, it’s also great that it looks good! The smart stainless steel styling complements our other products and looks professional.”The positive feedback from Byfords team means Richard wouldn’t hesitate to recommend Instanta to the other restaurants in the Norfolk Passport brand. “When we come across a product that works so well we always share our insights and I’ll certainly be letting the other teams know that they might be missing out on something!”

Many of the GRP Riser Floors we install are fitted during the initial build. Using a framework made from GRP profiles, capped with panels of GRP Grating, we fill usually simple shapes as a building goes up, ensuring people and equipment can’t fall down the holes required for services installation.In an older building, the chances are the services are already in place, which means we need to cut around any pipes, cables and ducting to ensure a neat fit with no gaps.Gainsborough House in Richmond was one such installation. The riser gaps were actually quite small so, while there was no risk of a person falling through, dropped tools could, presenting – at worst – a potential hazard to people and equipment below and – at best – an inconvenience as tools need to be retrieved or replaced. We were sub-contracted by Westgreen Construction to bring the spaces around the risers up to the current safety standards and help prevent future accidents.On some floors the gaps were almost full of services trunking and, as an added challenge, electrical cable trays coming forward presented an uneven surface to work on. We built frames between each tray, creating a raised base to fit the grating to. The mesh was then carefully cut to accommodate the various services in place.In other parts of the building the client needed the grating to be 50mm away from already-installed duct work to allow for lagging and requested a kick plate rather than the normal flush fit. This required a modified frame to give the site team something to fix the plate to.GRP is an incredibly flexible material to work with. It’s much lighter than steel equivalents making it relatively easy to manoeuvre into position. It’s also easier to cut and non-sparking so doesn’t require a hot works permit. This allows us to make adjustments onsite, achieving a high level of precision in a fraction of the time, keeping quality up and costs down.No matter what type or age of a building, our expert teams will find a GRP riser solution to ensure site safety. For more information call us on 01206 396 446.

More than 1,600 litres of Textrol Oil Clear were applied to the Velodrome and whilst we still cannot produce a proper case study until the games has finished, there is some evidence out there now.The 12,000 square metre roof is constructed using a very lightweight double curving cable net, suspended from a steel structure. Beneath it, the oval track is 250m in length, engineered for speed and constructed with great precision entirely from wood.The exterior of the building is clad in 5,000m2 of custom-cut Western Red Cedar shiplap boards. The entire exterior cladding was coated with Owatrol Textrol oil.

FlexEJ partners with its sister-company Safetech to design and fabricate specialist large diameter rubber expansion joints.Typically, particularly in the Gulf States, these are used in water treatment, distribution and desalination plants – and it’s these processes that took contingents from our sales and management teams to the UAE recently to see our product installed and operating.Desalination and water distribution in the UAE and surrounding countries are vital, integral components helping to supporting these oil-rich economies, thriving as they do in a desert region.The teams flew into Dubai to meet with our local representatives Parvez Mohiuddin and Mansoor Pullat and find out a little more about how the potable water supply operates in this thirsty city. Plants all over this region are in a continual process of refurbishment; the team were able to see how rubber expansion joints of various sizes had been replaced with high quality Safetech joints during a recent plant upgrade.We have an ongoing and growing commitment to the Gulf region and various projects underway there. Building relationships and developing understanding in the field are very much how we like to do business in both Safetech and FlexEJ so this was an ideal opportunity to share information and make plans.If you are interested in finding out more about FlexEJ’s large and custom-engineered rubber expansion joints, please contact our Technical Sales Team on +44 (0) 1384 881188 or send an email to sales@flexej.co.uk.

After 20 years in its Judd Street office in London’s Kings Cross, the Royal National Institute of Blind People recently moved to a new head office that better suited the charity’s evolving needs. The Grimaldi Building, a characterful self-contained office, serves as the charity's new London hub. Months of detailed planning and a thoughtful fit-out was required to ensure the new office facilities met the needs of all the RNIB employees and visitors. Understandably, accessible drinking water was a top priority."Zip HydroTaps have been used on a number of our projects and I have always found the team at Zip very willing to engage and explore a variety of user needs, which is really helpful – accessibility, clarity and ease of use is always a primary consideration for all our projects" Jean Hewitt, Inclusive Designer | Buro HappoldThe briefAn essential amenity in the workplace, the RNIB needed to provide staff, visitors and volunteers with easy access to both boiling and chilled drinking water, for hot and cold beverages. Integrated consulting engineers and advisers Buro Happold had their inclusive design expert Jean Hewitt on hand to support the RNIB with the Grimaldi building refurbishment, advising on accessibility. Her primary focus was ensuring that the building design considered those with sight loss and with this in mind, began her search for a drinking water system that was as inclusive as possible.The solutionOur HydroTap Accessibility range is designed specifically to support visually impaired, wheelchair and limited dexterity users. Jean chose to specify two HydroTap Accessibility models that provide instant filtered boiling and chilled drinking water. “I was attracted by the accessibility features, such as very clear colour coding and easy grip extended ‘ears’ for people who may have reduced dexterity and grip. The inclusion of tactile and Braille markings makes the use of the tap more intuitive for everyone,” explains Jean.The results"Zip HydroTaps have been used on a number of our projects and I have always found the team at Zip very willing to engage and explore a variety of user needs, which is really helpful – accessibility, clarity and ease of use is always a primary consideration for all our projects"Jean Hewitt , Inclusive DesignerBuro Happold

CMS DANSKIN ACOUSTICS recommended a bespoke combination of industrial acoustic materials to ensure noise at work compliance at ExxonMobil Oil Refinery. The ChallengeFawley Oil Refinery is the largest oil refinery in the UK. When ExxonMobil found that the noise output from two industrial fans at the refinery exceeded the levels specified by The Control of Noise at Work Regulations, it consulted CMS Danskin Acoustics for advice. To ensure the most cost effective and high performing materials were specified, CMS Danskin Acoustics evaluated the noise reduction required on-site. Evaluation of the acoustic data revealed that noise levels in excess of 118dB at 125Hz were being emitted by the fans. Based on these criteria, the technical team at CMS Danskin Acoustics recommended the use of a combination of specialist materials from its industrial acoustic range. The SolutionTo control the low frequency-biased sound, CMS Danskin Acoustics recommended and supplied the SuperLag Quietslab Laminate with Acoustic Barrier Type WB10 combination for the fan casings and associated ductwork. Creating a multi-layered, high performance system, two layers of SuperLag Quietslab Laminate, totalling 250mm thickness, with a core of 5mm Acoustic Barrier Type WB10, were bonded onto the fan casings and ductwork. A direct coupled lagging system, SuperLag Quietslab Laminate comprises long-stranded mineral fibres thermo-set with resins for the absorption of sound at the surface, as well as a high mass inner acoustic barrier core to reduce the transmission of sound through the material. Manufactured from a weight-enhanced, high-density material, Acoustic Barrier Type WB10 provides a flexible and cost effective treatment for chemical and refinery applications. In total, 1,000m2 of the SuperLag Quietslab Laminate/Acoustic Barrier Type WB10 materials were installed around the fans and ductwork to achieve the high levels of sound reduction required.ResultsThe high performance bespoke system specified by CMS Danskin Acoustics, significantly reduced the noise generated by the fans. This enabled ExxonMobil to comply with The Control of Noise at Work Regulations by bringing noise levels under the 85dB compliance level.

A barn conversion in Brecon has had a renewable heating system installed, featuring an Aerona³ air source heat pump and a QR hot water cylinder, a system which was designed by Grant UK and installed by a G1 Installer.

Architect: Simon Gill Architects. The brief for this project in Putney was to modernise the ground floor of this red-brick detached house, create a larger dining room and better connect the inside of the home with the garden. The end result is a complete transformation. Gone are the compressed spaces and smaller rooms and in their place is a large open-plan living area with seamless connection between the lounge, kitchen and dining room. These open plan spaces are filled with natural light thanks to a combination of Grand Slider II sliding doors and huge fixed frame picture windows.

The Tottenham Experience is the largest club shop in Europe, and the facility houses both the Tottenham Hotspurs & their NFL Partners a unique shopping experience. The Tottenham Experience houses an entertainment suite on the top floor which replicates the stadium terracing. The complexity of detailing around the balustrading and steps was overcome by using the internal and external Proteus Technical Team.Proteus Hot Melt® and Proteus Pro-Therm XPS Plus offered the perfect solution.High Performance WaterproofingWith the podium deck covering 1500m2, the Proteus Hot Melt® system combined with Proteus Pro Therm Insulation XPS Plus was the optimum waterproofing solution for this project with a cost effective, seamless and fast application.This High performance solution worked exceptionally well for our Proteus Approved Contractor, who was able to install the system without any complications to the highest standard.Quality controlProteus Waterproofing worked in close partnership with both the Architect, Main Contractor and Proteus Approved Contractor, to successfully deliver the project to a very high standard within the required time frame and to the standard required.Long term performanceProteus Hot Melt® is a long lasting robust membrane design to last. The client required both a BBA Certified product that offered a 25 year Guarantee for the waterproofing system on this project.

Marsh Industries have provided a total of 7 Oil Separators to this site over 3 phases of development.  The site has a total of 1,685,000 square feet of warehouse space. Offering prime access to the UK motorway network. Bordering the M1 and being a mere 20 miles from the M6/A14.With the Nene Valley neighbouring the site, pollution prevention is key. 3 Bypass Separators have been supplied by Marsh Industries.  Alongside 4 Full Retention Separators.

The result of the first project of this type is a house with an organic, soft design - the furnishings minimalistic, high-quality and modern. The house consists of triple-shelled walls that are filled with insulating mass. With the help of a giant 3D printer, the concrete mass was applied layer by layer. And within only a few months, a single-family house with 160 m² of living space was created.Nothing was to be missing from the house with its furnishings; the aim was to emphasise the high-quality and special style of the building. The concrete layers were to remain visible inside and out - reduced, clean and yet expressive in its style. This claim runs consistently through all rooms of the house. The bathrooms are equipped with KEUCO IXMO fittings in the shower and on the bathtub. The minimalistic fitting elements blend into the futuristic image, restrained yet strong in design. The shiny chrome finish, reflect a brilliant contrast to the dark tiles in the shower.Aligning with the principle of the house "without corners and edges", round cover plates were chosen for the fittings.  The accessories at the washbasin and WC also fulfil the credo of the design concept: EDITION 400 with its round form language is filigree and the accessories are high-quality eye-catchers. They enhance the bathroom with their understatement.What once started as a pilot project could influence building in the future and also offer installation and plumbing companies with completely new challenges.The materials and fittings of the bathrooms were chosen to match the special wall texture. "Without corners and edges", the EDITION 400 accessories from KEUCO perfectly fit to the motto, as does the KEUCO IXMO bath mixer with round cover plates.In addition to numerous accessories for the toilet and washbasin area, the EDITION 400 range also includes many hooks and towel rails. The accessories are very filigree in design and nicely round-off the bathroom design in a discrete and elegant way.  The IXMO fittings in the shower are not only outstanding in terms of design, but also from a technical point of view: the water quantity and temperature are regulated via the single-lever mixer. The shower holder integrates a diverter, where you can choose between a large overhead shower and a hand shower. Two in one: The KEUCO free-standing accessory for the toilet area is the flexible solution for a toilet paper holder and toilet brush set. Thanks to the large base plate, it is particularly stable.  

A Grant Aerona³ air source heat pump has been installed at a cottage in Fife, transforming the home’s heating from an oil-fired system to a renewable alternative. The homeowners are now enjoying a warm home while also lowering their carbon footprint.

Renowned fit-out company, Overbury, wanted to install a communal drinking water solution at their headquarters, to keep their staff safe upon their return to the office after the COVID-19 lockdown.

F. Ball products have been used as part of the refurbishment of Grade I listed building, The British Library. Contractors had to install 800m2 of flooring in the second largest library in the world. When contractors arrived on the site, the old floorcoverings had already been taken up. Stopgap Fill and Prime was selected to fill in the gaps between the raised access panels and create a smooth, even, and primed subfloor. Styccobond F40 high tack dual bond adhesive, with its ability to provide a peelable bond for release underlays, was used to adhere the carpet in the library.

Abode was the tap designer of choice to inject eco-luxe convenience to a unique water tower restoration project in Castle Acre, Norfolk with Pronteau: a high-specification range of steaming hot water taps. Paul Illingworth, Design Manager at Abode says, “We were delighted to be a part of this project alongside property owner Dennis Pedersen and Tonkin Liu Architects, as they meticulously came together to reimagine a derelict industrial water tank into a contemporary, family home. Dennis purchased the water tower at auction for £20,000 in 2015, and then project-managed all the building work himself to save money and realize Tonkin Liu’s architectural vision with the help of a local builder. Following the addition of a new CLT timber tower and careful infilling, the original water tank is now an open-plan kitchen living space complete with Pronteau Propure 4 IN 1 steaming hot water tap in ultra-fashionable Urban Copper finish. As the property needs to cater to a family of four, the additional breakfast room on the second floor, is also designed with a Pronteau Propure 4 IN 1, to ensure the height of convenience, design continuity and eco luxury in the modern home and living space.”  The 160 sqm Water Tower project, is testament to the increasing demand and complexity in personalised building projects across the UK. As the trend for flexible kitchen living is a key focus for today’s multi-generational homes, homeowners want to make sustainable choices wherever possible. Pronteau by Abode is the ideal way to combine high function design with a superior style, heightened level of safety and sustainable consideration in reducing the consumption of plastic bottled mineral water.  “We believe that safety goes hand in hand in interior design and construction, which is why we continually invest in new product development to ensure our designs are fit for purpose. As a practical example, our exclusive Filter Recycle Scheme enables end users to return redundant filters directly to us for recycling.”