"glazing methods"

Architectural glazing systems by Kawneer were specified for a primarily residential building at the heart of the redevelopment of London’s Greenwich Square for their aesthetic, acoustic, thermal, fire-resistant and sustainability credentials.

Steel slimline windows and doors, steel heritage windows, steel secondary glazing, steel curtain walling, fire rated steel screens, fire rated steel doors

Proteus Waterproofing were contacted to assist with the roof refurbishment for the The Co-Operative Group, Wembley. The existing felt waterproofing and timber deck had failed allowing water ingress into the residential building below. Upon further inspection, Proteus established that the existing roof lacked any insulation and therefore did not meet current Building Regulations. a Proteus Pro Felt® system was specified as a competitive and cost effective waterproofing solution.High Performance WaterproofingThe roof coverings and timber decking had to be removed. A new 18mm ply wood deck was installed to the roof pitches before a high performance Proteus Pro Felt® system could be laid. This incorporated 120mm Proteus Pro-Therm® insulation to ensure all current building regulations were met. Due to the 45 degree pitch of both the front and rear roofs, Proteus needed to design a fixing method to ensure the felt and insulation did not slip in the warmer weather. Proteus Waterproofing worked closely with the Proteus Approved Contractor, to ensure the project was delivered to a high standard.Health & SafetyWhen working on public buildings, safety is always of utmost importance. Proteus Pro-Felt® Self Adhesive Mineral Capsheet has the highest European Fire Rating, BROOF(t4), making it the ideal felt to use on public building as the risks to operatives and members of the public are greatly reduced. All Proteus Waterproofing specifications promote fire safe installation methods conforming to the industry lead Safe2Torch guidelines.Long Term PerformanceProteus Pro-Felt® is a High-Performance range of bituminous membrane system, tested to perform in extreme temperatures and weather conditions. It has class leading modified bitumen content which allows the flexible membrane to move with the building and ensure long term durability and performance with guarantees available up to 25 years.

Architectural glazing systems by Kawneer featured on the third and final apartment building at The Slate Yard, which forms part of the wider £1 billion, 50-acre Salford Central masterplan.

The £45 million world-class School of Management is the flagship building of the University of Bath. The seven-storey building brings together the entire school under one roof and is a place to inspire new levels of collaboration and showcase the excellent learning, research, and industry partnerships available.The three principles of the design are flexibility, transparency, and collaboration. At the centre of the building is an impressive atrium with a feature steel staircase.   Within the atrium is the pavilion, a double height space flooded with natural light has been designed as a hub of activity where great minds meet. The buildings two arms emerge from a central node, each wing housing an array of academic and research space. The design brief called for openness and transparency which was achieved by the use of Lusso glazed partitioning throughout. The Lusso 25 glazed system and Silenzio doors were used to enhance and divide up space which at the same time allows natural light to filter through the building and encourage connectivity. Where the design required glass partitions in excess of 3.5 metres height the Lusso 105 glazed system was selected to meet the structural requirement which has created a visually impactful atrium.

Flexible workspace providers x+why’s new 33,000 sq ft location at 100 Embankment aims to provide “an impressive space from which to grow and thrive” for start-ups and established businesses across Manchester.Radii, working through our northern contracting office, joined John Robertson Architects and ADT Workplace in May 2023. Working across Ground, Mezz and 1st and 2nd Floors of the space, Radii’s popular single glazed Linear 25 (Rw 39 dB) and Linear 30 (Rw 41 dB) partitions and Hogan single and double pivoting doors (Rw 47 dB) were used for glazed fronts for a variety of different size meeting spaces and offices. Many of these were installed with our popular ‘Rio’ banding.Ei30 single glazed fire rated screens, complete with timber door frame junctions, provide exit route protection.The finished space also benefits from some of the 11 Ei60 FireTec double door sets installed across all eight levels of the building during the original base build Cat A fit out in 2020.

Sopro RS 648 Vibration Slurry was selected for the LIDL method of tiling which consists of compact-vibration floor tile fixing, in the new LIDL store in Bently, Doncaster. Smet Supported Partner, Core PIC Ltd, selected the superior quality German-made, RS 648 Vibration Slurry for its flexibility as a bonding slurry in the installation of stone and ceramic tiles, making it ideal for using in vibrated floor systems (or indeed conventional methods). The tiling was carried on on behalf of main contractor PDR Construction.In preparing the floor to LIDL spec, the floor screed is placed and struck off to required levels and pre-compacted using a straight edge. The bonding layer, namely Sopro RS 648 vibration slurry, is applied to prepared and pre-compacted floor screed and ceramic tiles are immediately placed with tightly butted joints to LIDL spec.After installation of a vibratable area (10 – 20 m², depending on situation/ambient conditions and resultant setting behaviour of floor screed), a surface vibrator is passed over floor covering and tiles vibrated into the adhesive bed. When sufficiently set, hardened and bonded joints were grouted with Sopro FL 526 Flexible Tile grout.Sopro RS 648 Vibration Slurry is a one-component, fibre-reinforced, polymer-modified, trass-bearing, cementitious bonding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. It’s ideal for slurry application technique. Sopro RS 648 is particularly suitable for laying tiles with low water absorption (fully vitrified stoneware). For laying large-format units (30 cm × 60 cm) using vibrated floor system. It can also be used as slurry-applied bonding layer on substrates and on bedding adhesive.Sopro FL 526 Flexible Tile Grout is a flexible, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888. Suitable for grouting ceramic, fully vitrified stoneware, natural and cast stone coverings and glass block assemblies. Rapid set for low-suction tiles, with specially tailored joint-filling properties and first-rate washability (removability). Particularly suitable for balconies, patios and in conjunction with floor heating systems (UFH).The product’s special properties and SMET’s superior technical backup, are key factors in choosing Sopro RS 648 Vibration Slurry and Sopro FL 526 Flexible Tile Grout. Smet Building Products Ltd is committed to delivering high-quality products to the construction of LIDL stores.For more info on our range of SMET Professional Tiling Products.PDR built the new LoF (Lidl of the future) store in Bentley Doncaster. The 23,000 sq/ft store with its striking design will help to increase Lidl’s market share and see their profits continue to rise in the UK. The Bentley store will be PDR’s 10th new build store for Lidl.Related DownloadsTDS Sopro RS 648 Vibration SlurryTDS Sopro FL 526 – Flexible Tile GroutSmet Professional Tiling Systems Brochure

Made-to-order Traditional Leaded Timber casement windows and doors from the Kensington & Chelsea range by Lomax + Wood, an approved supplier and installer of the Hampstead Garden Suburb Trust (HGST). Timber casement windows with traditional single glazed true leaded bars on front elevation Leaded lights and double-glazed timber casement windows to the side and rear elevations Made-to-order with 18mm 4/10/4 Krypton gas-filled slim units Custom Designs to replicate the existing windows Luxury Forged Bulb End handles Colour match F&B White Tie Supply and install service 25 casement windows 3 French doors

The SYSTEMGLAS® fire resistant, butt-jointed glazing system range from Promat has been expanded with a host of new configurations and additional performance capabilities to meet the growing demand from architects for assured fire protection. Detailed in the new 2019 SYSTEMGLAS® Specifiers Guide, the new options supplement an already expansive product range of fire-resistant glazing screens offering protection of between 30 and 120 minutes. The range’s four systems provide framing options in steel, timber and two which utilise the fire-resistant calcium silicate PROMATECT® H to allow for over-cladding or concealment for a virtually ‘frameless’ effect.

This new Multi-Brand Dealership is comprised of three showrooms for the three prestige automotive brands, Jaguar Land Rover, Aston Martin and McLaren and has been built in Hatfield Business Park, Shropshire by the award winning MCS Group. Each of the showrooms have been designed to allow freedom to explore the range of vehicles in a contemporary environment that is both luxurious and inviting. The Aston Martin and McLaren showrooms are also the first in the UK to showcase the newest corporate identities for the brands.The Jaguar Land Rover £15 million showroom is both light and spacious. It provides 18 vehicle display spaces and dedicated vehicle handover suites. There is also a drive-in service area, valet and preparation area. The Lusso 25 single glazed frameless glazed partition system was installed to create office spaces which allows uninterrupted visibility to the showroom. McLaren has a history of exceptional design and engineering, so it is not surprising that the design for the showroom includes a feature curved glazed partitioning system with curved glass sliding doors. Lusso rose to this challenge and bravely executed the complex design requirements. With this statement partitioning, the showroom becomes a be-fitting space for the stunning range of McLaren supercars, providing the customer with an unforgettable shopping experience. As a prestigious brand, Aston Martin is well-known around the world for being a car manufacturer that produces vehicles that turn heads. Their stylish new showroom has been designed to provide a luxurious backdrop for their stunning supercars.The development of the facility has created a bespoke environment with a dedicated customer specification lounge, private handover area and aftersales facilities.With the use of Lusso Glazed Partitioning System, the bespoke showroom has been given a sleek look which was required for this brand.Image - 8

Installed alongside some interesting brass architectural detailing, TECHNAL aluminium windows, doors and curtain walling has been specified and installed at Heathervale House, transforming the outdated office development. Situated in the centre of Tunbridge Wells, Heathervale House is a commercial property that has been used as an office space for decades. Originally clad in brick, slate and hung tile, the building had shown signs of disrepair, looking tired and dilapidated. To bring it back to life, the building owner developed plans to undertake a wide scale refurbishment and extension of the property. Following a feasibility study, the building was handed across to design-led architectural practice MortonScarr. From the outset, MortonScarr recognised how important updated glazing systems would be in improving the aesthetics and performance of the building, both internally and externally. Previously, Heathervale House had featured small, brown-framed windows, which limited how much sunlight those inside the offices received throughout the day. The entire facade of the three-storey building was re-clad with concrete tiles, with interesting projecting brass window boxes also incorporated. The window boxes, which feature TECHNAL systems, added visual relief to the building externally, whilst maximising internal vistas for the occupants. TECHNAL also assisted on a large rear extension, a new glazed lift to the front and two additional fully glazed storeys on top of the existing roof. Flooding the new office spaces with daylight, the large glazed expanses are shaded by two-storey bronze louvres. As a result the newly fitted office now brings in much more natural light than before.

Background & BuildingSituated within an Art Deco Grade 1 listed building is MediCity Nottingham, the pharma incubator. MediCity is a collaboration between Boots and BioCity, the UK’s leading life sciences incubation business. To provide and encourage a stimulating and supportive business development environment for innovators, their premises was completely refurbished.The Brief in BriefThe co-working space is a stylish art deco alternative, which was designed to encourage collaboration and productivity for all.Hot desks and “pods” were designed and installed to create a flexible working environment for individuals or small teams. The facilities include laboratory and office space, access to high-end equipment, shared services, training, business support and access to investment. Aligning to the purpose of the facility, building performance was a key aspect of the brief.Komfort’s SolutionWith the intent of meeting performance requirements, Komfort’s glazed Firescreens were installed in the reception area. Komfort’s technical and project management teams worked closely with the design team to provide a solution to fully glaze the reception area from floor to ceiling.Our specialist internal glazing and firescreens provide a fire rating of up to 2 hours, along with sound and structural performance. Utilising thin glass, minimal framing and exceptional structural performance the specialist internal glazing and firescreens are unique, combining aesthetics with performance.The End ResultKomfort thoroughly enjoyed being a part of the design process and working so closely with Roshal Space Consultants. The building now serves the purpose of providing an ideal and inspiring environment for both start-up and established companies to grow and achieve success, whilst adhering to building performance requirements.

Project: Pegasus House, Filton Client: Aviation industry client Scope of the project: £42,000 project including five lantern lights Products: em-glaze dual pitched lantern lights

Challenge: The structure was had severe structural degradation due to the ingress of moisture and water over its near 100-year life. Corrosion to the steelframe resulted in tensile forces cracking and moving the brick skin, also causing a cracked façade. Strategy: ICCP was used as a method to control corrosion whilst the cracking and movement were repaired. This involved LoCem® and +point® AACM anode mortar to be grouted in the bed joints, alongside embedded corrosion rate sensors for service life tracking (AchillesICP and AiMS). LoCem® is a low carbon cement alternative, that can also act as a cathodic protection anode. Outcome: The structure was restored to be used as high-value residential apartments, saving tonnes of embodied carbon and eliminated the option of demolition. The embedded system successfully controlled and monitored corrosion for the long term, adding an additional 100 years to the structure’s service life.

Structural Repairs’ office space was beautifully and seamlessly integrated into one of Windsor’s iconic train station arches. This newly built office space boasts from its impressive structural logistics and boldly featured decorative and themed memorabilia at many of its cozy corners.Via a combination of the fire grit machine, TORC system (seen in the images and videos), water by pressure and a DOFF system, the carbon accumulated in the brickwork was removed. These methods, especially the DOFF system, work with high-pressure stream and extremely high temperatures.Brick cleaning is an arduous and labor intensive process by which a brick masonry, also known as a layer of brick which has been laid on the wall’s outermost surface, is cleaned. Brick cleaning is required at various different stages of a building’s life, and with our arch, a cleaning was more than overdue to restore it back to its original condition!

THE PROJECTThe Wall of Colour project features a small bank of colourful mailboxes using an in front / out front posting and retrieval method. The small bank of mailboxes are wall mounted with additional support from a set of cantilever support stands to hold the mailboxes steady and eliminate the need for a support table or legs to be used.Each mailbox has been engraved with numerical identification and infilled with a contrasting white colour. The mailboxes were banked prior to despatch to the client, allowing for an easy, quick and trouble-free installation.PROJECT DETAILSProject Type: Private ResidentialProduct: COM 2 mailboxInstallation: Wall MountedColour: Sky Blue (RAL 5015). Moss Green (RAL 6005). Melon Yellow (RAL 1028). Carmine Red (RAL 3002).Accessories: Numbered engraving. Cantilever support stands.

Lucent W1 is a high profile mixed-use building comprising 111,000 sqft of CAT Acommercial space, 30,000 sqft of retail space and seven new residential units in WestLondon. The development is built with sustainability at its core, including a BREEAM‘Excellent’ rating and pending Gold WELL accreditation.The design of the building, behind the famous Piccadilly lights, meant that traditionalinstallation methods could not be used while maintaining the fire separation wall. Thisconstraint meant building could only commence from one side and required a newsolution. We designed bespoke wind posts and cut the boards to the exact anglesrequired so that they could be fitted from one side only. Combined with Specwall’sinherent firestopping properties, this made us the perfect choice to solve the designissues at Lucent W1.

Resin flooring systems from Sherwin-Williams for food and drink manufacturing areas are seamless, strong, slip-resistant and safe for pedestrian traffic. Textured products including FasTop TG69 are independently tested as having low slip potential when tested with the TRRL Pendulum method promoted by the Health & Safety Executive.In order to reduce the impact on daily operations and allow food production to continue, FasTop TG69 is low odour and can be installed as quickly as possible in line with fast-track programmes to avoid disrupting manufacturing procedures as much as possible.This flooring system can withstand high temperatures, thermal exposure to reflective heat from ovens, as well as heavy impact, heavy machinery and equipment, and a high volume of footfall. It can also resist particularly harmful chemicals used as part of the Clean-In-Place CIP process such as caustic soda, nitric and phosphoric acid.

This housing development required a retaining wall solution but presented challenges in terms of limited space and existing services. Two retaining walls were required at the sides of the entrance to Nicholls Lane housing development. While a Geogrid Reinforced Backfill method was appropriate for the Secura Grand retaining wall on the righthand side of the development, the retaining wall on the left was met with the challenges of limited space and existing services. The highway boundary limited the amount of space available to construct the retaining wall on the left- hand side. The existing services present within the retained soil caused further complexities. On this occasion minimising excavation was crucial due to the services within the retained soil. Efficient use of land was vital as the Secura wall didn’t have the room at the back for geogrid or for no-fines concrete backfill. It was desirable that both walls at the sides of the entrance looked the same despite their different conditions.

9,000 m² of solar control glazing with Pilkington Activ Suncool™ 50/25, 2,000 m² enamelled panels with screen printing and 700 m² of curved solar control insulating glass.

TRC was appointed as principal contractor by Barker Associates in May 2019, to carry out specialist sash window restoration works.Trinity Primary Academy is a primary school located in Bounds Green Road, Wood Green, London. It was built in 1899 by Mitchell and Butler and consists of yellow brick and red brick dressings, tiled roofs, irregular fenestrations, and sash windows that give away its Queen Anne Revival style. It's currently categorised as a Grade II Listed building with Historic England, and is part of the Academies Enterprise Trust.Nature of the worksAs the building was Grade II listed, timber window repairs had to be sympathetic and complementary to the historic nature of the property. Many of the existing timber sash windows were inoperable due to the build-up of decorative coatings, timber degradation, and defective and broken sash window ironmongery, as well as opening mechanisms. The requirement was for the windows to be fully refurbished, repaired and operational as originally intended, but also modified to meet health and safety requirements.Phase one of the refurbishment of 200 sash and timber casement windows commenced on the area needing most attention: the west elevation of the building. Following the success of phase one, the client team extended TRC’s appointment to continue around the remainder of the building, systematically completing all other windows, door and roof light refurbishments.This overall refurbishment project included:Stripping back the existing paint from the historic sash windows and repairing any decayed timber.Repairing glazing as and where necessary.Improving the thermal and acoustic containment by installing draughtproofing.Repainting windows and installing ironmongery.Undertaking brick and stone repairs to the building’s exterior.This project also required our specialist attention on some specific areas of traditional glazing. This aspect of the project required the repair and refurbishment of all four oriel bay windows and the oriel bay glazed roofs. Completion included the supply and fixing of new safety glazing and hardwood timber roof rafters, along with the repair and refurbishment of the two existing openable roof lights. The supply and fixing of new code 4 lead flashing, with lead wedges, was also carried out and fully pointed with the correct cement mortar at the wall abutment.Additional detailed work throughout the project included the following:Removal of all existing fitted window blinds for refixing upon completion of works.Removal and repair of existing window ironmongery, including original mechanical winding gear, solid bar opening mechanisms, locking fasteners, slide bar restrictors, cable restrictors, handles and stays.Careful removal and repair of all internal fixed-glazed hopper units, casements and pivot openings.Removal and replacement of all cracked and broken glazing, and replacement of the existing Georgian wired-glazing, with 6mm safety glass or 4mm polished plate glass to areas up to 1.2m height from floor level. Where privacy was required, white opaque glass with thickness in accordance with above was used.Removal and replacement of all loose and defective glazing putties, and removal of all flaking, loose and built-up paint coatings.Exposure of all timber rot and decay ready for repair with Repair Care Systems products, followed by sanding and priming ready for decoration.Vertical sliding sashes repaired, refurbished and rehung on new sash cords and weights, and adjusted as needed. Sashes were routed to accept new brush pile weather stripping. New parting beads and staff beads were serviced with brush pile weather stripping where appropriate.Final internal and external decoration was carried out using Dulux or Leyland trade paints, allowing for one undercoat and one gloss finish.

To make the space work for the acoustic and aesthetic requirements, Ryder specified Komfort’s frameless partitioning systems.Komfort’s single and double glazed partitioning systems with 25mm deflection were specified by Ryder in all the meeting rooms on multiple floors. Komfort’s manufacturing team MIG welded together each of the 90-degree corners to create a unique and bespoke design for this project. This helped install speed and resulted in a seamless and high-end appearance by ensuring no separation once glazed.In an aluminium frame, our partitioning creates the appearance of frameless glass with our patented bubble joint. Our systems are designed to balance aesthetics, elegance and durability in any working environment and offer market-leading performance.

The £350 million Grange University Hospital is the centrepiece of a new model of healthcare delivery, which aims to transform health service delivery across Gwent. The new super hospital includes a 24-hour Emergency Department and assessment unit for major emergencies, resuscitation, and 370 critical care beds for those requiring onward intensive care.The hospital has been divided into two sectors over five levels, with care services at one side and treatment areas on the other. It has been designed to offer the highest quality patient environment, whilst being flexible, adaptable and expandable for changing needs. The hospital will be home to more than 40 specialist services. To attract and retain the best workforce, the building has been designed to offer a workplace which has high quality staff areas with a highly connected environment. Lusso were procured to supply and install all of the glazed partitions and glazed door sets throughout the hospital, including bespoke Lusso single and double-glazed systems designed specifically for healthcare installations. Due to the pandemic and the increased need for critical care services, the hospital was fast-tracked for completion a year early, whilst retaining the exacting standards expected of a high-profile project. 

Two variants of the AA®110 curtain walling system, as well as window vents, doors and “roof glazing” feature on the International Convention Centre for Wales at the Celtic Manor Resort in Newport, South Wales.

The lift was installed in the heart of the shopping centre, alongside the staircase to provide access to the floors for all visitors. The glazed shaft and panoramic doors preserve the light and airiness of the space, making this an ideal solution for public accessibility.

Architectural glazing systems developed and supplied by Kawneer successfully met a trio of criteria for the £50 million award-winning redevelopment of two existing commercial office blocks into premium student accommodation at Crown Place, Norwich.

The glazed structure has proved to be amazingly useful at the University of Wolverhampton Wednesfield Academy. Break times are now not so crowded indoors or such a rush, as students and staff have more choice concerning where to eat and socialise.

Sirius and Ganton Academy is a dynamic 21st century learning environment created to accommodate state-of-the-art facilities in Hull. It is also the UK’s first academy to be constructed using Technal’s revolutionary low rise glazing system.

A retrofit project transforms an iconic 19th century building into a modern office Read about a refurbishment project that includes a glazing panel rooflight installation as part of sustainable design to improve EPC ratings at The Drill Hall

About the projectIn the summer of 2016, Paterson Gordon Architecture were approached to renovate an existing steading that stood in a derelict state. However, the stunning views of Loch Lomond created an inspiring opportunity to design and build a modern family home.Which FAKRO products were used?This property required an increase of natural light for a dark space within the building which could not fulfil its highest potential. By specifying DMF-D U6 and DXF-D U6 flat roof windows, Paterson Gordon Architecture was able to deliver a substantial proportion of natural light into the central hallway. DMF - D U6 Manually-operated Flat Roof WindowManual opening flat roof windows.The type F window is equipped with an energy-efficient triple-glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC upstand is RAL 9010, the internal finish is RAL 9010 white PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.DXF-D U6 Non-opening Flat Roof WindowNon-opening flat roof window.The Type F Window is equipped with an energy-efficient triple glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC Upstand is RAL9010, the internal finish is RAL9010 White PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.The existing part of the barn specified conservation-style roof windows to suit the original roof openings. To meet this requirement, FAKRO conservation windows were specified and installed. The characteristic feature is a black vertical mullion bar down the middle of the window and its black cladding. Making it suitable for traditional construction. Most of FAKROs standard windows are available as a conservation window.Why were FAKRO products specified?Primarily, the appearance of the flat roof windows was behind the reason for choosing FAKRO, along with the diverse product range and the ability to install the windows onto zinc, slate, and single-ply membrane roofs.