"glass door"

Berwick Street is a lively and diverse community in the heart of London's Soho district, built between 1687 and 1703. It runs between Oxford Street to the north and Peter Street to the south and is well known for its thriving market which was established in the 18th century, making it one of the oldest markets in London. 90-104 Berwick Street has recently been transformed from an unattractive 1950s block into a stylish, contemporary, mixed use development. Although unlisted, the building is situated in the Core Central Activities Zone and the Soho Conservation Area, so it was vital that any changes made were in keeping with the surroundings. Clement Windows Group was requested to supply and install the custom- made steel windows and door screens used for the shop fronts on the ground level. A combination of products was specified from both hot rolled and cold formed steel profiles all with polyester powder paint surface coatings. These included Clement W40 steel windows which sit beside and above the doors, the Jansen Economy 50 range of single and double doors and Jansen Economy 60 range of bi fold doors.The Project Manager, Ben Styles said “The Clement W40 steel windows and the Jansen Economy doors provided us with the slender, elegant frames we wanted for this Central London development, giving the shop fronts a contemporary look while remaining true to the urban origins of the site. Clement delivered to our timescales, and we would use them again.”

In our first in a series of case studies, we’ve invited FireDNA Alliance Partner, Steve Neilson to share his experiences using the FireDNA system to inspect and catalogue 9422 fire doors in three months, on behalf of Mitie, for the Scottish Fire and Rescue Service.The Scottish Fire & Rescue Service is the fourth largest in the world and ensures the safety and wellbeing of the people in Scotland. Operating out of 547 buildings across 357 sites, these centres are managed by the UK’s largest ‘Facilities Management’ provider Mitie.Following several months of discussion between Mitie and the Scottish Fire & Rescue Service regarding the status of the fire doors across their property portfolio, a tender was issued for an extensive fire door inspection and evaluation programme to be undertaken.Having secured the works through competitive tender, we further engaged with Mitie and the Scottish Fire & Rescue Service team. Working through their property asset registers in detail we gained a full understanding of the scope and requirements of the project.Following weeks of detailed project planning and final agreement on the timeline, it was evident that we had just over 3 months to inspect and report our findings on 9422 fire doors across the 357 site locations, and this all had to be done during the winter months of late 2021 and early 2022.In order to deliver on such a tight timescale, absolute dedication and collaboration was required from all parties…the project managers, admin staff and fire inspectors as well as the teams at Mitie and Scottish Fire & Rescue Service. To support this challenging task we armed our resources with a new cloud based system called ‘FireDNA’.We had been approached by FireDNA a couple of years earlier to see if we would be interested in helping to beta test their new ‘Fire Door Inspection and Monitoring Software’, to which we agreed, little did we know at the time that this software would prove invaluable to us further down the line!Deploying teams of up to 10 Fire Inspectors at a time, armed with the new and now completed FireDNA Inspection and Monitoring App, we set about working through the phased inspection schedule.Having been involved in the development testing of the FireDNA software, we had no doubt this system would, increase the speed in which the surveys were carried out, and dramatically reduce the time and effort in reporting the findings. Working closely with the FireDNA software support team, who assisted us in the initial software training, our Fire Inspectors were able to work efficiently and effectively ‘at pace’ through the challenge. The FireDNA App also has ‘LiveChat’ built in so any questions or queries by our operatives in the field were easily and quickly dealt with by the FireDNA team, which meant there was very little downtime during the inspection process.One of the great benefits of using the FireDNA App is that everything is ‘real-time’ so our office-based project managers could immediately see how the inspections were progressing. Once the inspection data and supporting photography was in the system report generation was largely automated and nicely formatted into MS Word and Excel documents.These reports could then be initially shared internally with our remedial work/replacement estimators for accurate cost estimates, who in turn could then produce accurate cost estimates and quotes for the works required as each buildings inspection was completed. This created a very fast, efficient and accessible workflow process for the whole team.FireDNA is not only a fantastic fire inspection and reporting tool, but also initiates the ‘golden thread’ of information, allowing building owners and managers like the Scottish Fire & Rescue Service and Mitie to take ownership of the ‘live data’ in the system, which can easily be updated and shared as each fire door asset is inspected, monitored and maintained year-on-year, which will soon become the minimum legal requirement.FireDNA also enables building owners and facility managers to create status reports for O&M compliance, which can be shared with insurers and the like, as well as appointing contractors and maintenance teams to carry out and catalogue remedial works and new installations, which are all date-stamped and locked into the system.In our view, anyone involved in fire inspections, installations, planned preventative maintenance and asset recording of passive fire products, such as fire doors, doorsets and fire screens should be using the FireDNA system. For duty holders such as building owners, facility managers, landlords and surveyors to make sure the assets they are responsible for are safe and compliant and the data unambiguous and accessible by all that need it, including residents.We believe FireDNA is the best system on the market and anyone who uses it will appreciate not only the time and money savings but importantly how this centralised system improves work standards across the full lifecycle of passive fire products. Steve Neilson – FireDNA Alliance Partner – Scotland

Bolands Mill, located in Dublin, Ireland, is a mixed-use commercial building that has been upgraded with Apton’s high-quality solutions for Google’s workspace. We provided Google with our Quartz Double Glazed Partitions, MK2 Double Glazed Doors and Accessible Tech Panels.

A stunning property on the Isle of Wight which was built around 1844 in the Italian style and situated within the Conservation Area of Ventnor. Lomax + Wood provided high performance, double glazed timber French doors and sash windows. The house combines quality wooden double glazed and weather-stripped Lomax + Wood windows and doors. The property was designed to be energy efficient with Celotex fitted in the majority of the house. This is another example of how well designed timber windows and doors can add to and enhance even the most sensitive renovation within a Conservation Area.

An important refinement for a single story extensionThe ChallengeThe homeowner knew that in order to maximise that amount natural sunlight for their single storey extension that the addition of rooflights would be an ideal solution, but with an important refinement.The solutionIn order to provide the maximum amount of light we designed a bespoke low-profile pyramid rooflight with blue tinted glass this ensured that the Rooflight gave another dimension to their single storey extension.They now enjoy natural light which gives a greater feeling of space and light, combined with fully glazed floor to ceiling doors meant they were also able to enjoy to views and access to their garden space. Whether you’re at planning or construction stage why not see how we could help you add natural light and space to your home project; you can call us on 01223 792244 or pop us an email via info@nextgenrooflights.co.uk outlining what help you need.

ModernGlide were over the moon too be involved with this project with a top London Interior Company at St Katharine Docks London. Installation of over 66 meters of sliding movable wall panels to help create a sleek and flexible studying environment. Featured in the video is the MG600 flush glazed movable wall that when closed creates a central room with the panels meeting at right angles and the addition of 2 access door panels. Particularly desirable for office spaces, our MG600 glazed office partitions and glass movable walls offer multiple benefits to your workspace and for your employees. The benefits of having glazed acoustic walls include allowing a superior light flow around the office, cost-effective installation, flexibility in the work environment as well as the simple fact that they look elegant and classy. Not only these, but they also offer exceptional sound reduction allowing for privacy to be had amongst clients or for important internal meetings.

Radii create a bespoke glass partition system design for BCG Digital Ventures, with new dies manufactured especially for the project at our in-house manufacturing facilities.Previously, Radii had worked at 80 Charlotte Street for BCG to produce a stunning timber-framed partition system across 257 meeting rooms and offices in the floors directly above the Digital Ventures site. This new installation was designed to match our original work for BCG and create a synergy throughout the space — but with aluminium framework used in place of timber.The final installation used 100mm wide single glazed partitions and joinery with consistent mullion details. Furthermore, bespoke dies were also created for black powder coated aluminium light portals that were installed around some partitioning elements with integrated LED lighting.Radii also provided some fire rated glazing from the FirePro range, certified up to Ei120 rating for screens and Ei90 for doors.

During the core renovation of the Frankfurt office tower, the Lindner Group was entrusted with the complete basic fit-out and one of the tenant fit-outs. In addition tocarrying out various drywall works, high quality raised floors and energy-efficient heated and chilled ceilings were installed in combination with lighting systems fromLindner. High-quality wooden doors from Lindner’s own production, related joinery work, as well as flexible system glass partitions complete the construction package. Lindner also carried out plastering and painting work as well as tile, coating and flooring work, and additional installation services.Despite numerous challenges such as (heritage-protected) construction in existing buildings and the high logistical effort involved, the vision of a modern office tower wassuccessfully realized. Thanks to sustainable construction systems and building services combined with effective thermal insulation measures, the Global Tower is set tobe awarded with the DGNB Platinum certification.

The Hard Rock hotels are an iconic music brand with an international presence.During the refurbishment of their retail premises in Great Cumberland Place, London they approached ASH to design a handle that reflected the values synonymous with their music brand and could be placed throughout the hotel.During the briefing session their iconic music associations and guitars were chosen as a product that many people identified with and was a design that could be practically developed into an entrance handle and handles throughout that kept it’s original design qualities whilst remaining practical and functional.Following the initial briefing ASH worked to develop the design for their new pull door handles, informing the client throughout the design process and providing technical drawings for the client’s interior designers.

Union Industries’ engineers acted almost as fast as its rapid roll industrial doors to ensure one of its Eiger freezer doors was fitted in record time at Total Foodservice Solutions.

Following in the footsteps of a string of successful installations at the Northern General Hospital, Sheffield, Yeoman Shield products were again chosen as part of the refurbishment of the hospital’s Firth C & D floor corridors.With the need to refresh the interior walls and doors, as well as future proof them from further damage and marking, a variety of products from Yeoman Shield’s range were employed.Corridor doors, which are on the frontline when it comes to impact damage, were fitted out with Yeoman Shield Door Edge Protectors and PVCu clad glazing beads, both in a graphite colour. Contrasting Mid Grey Door Protection Panels were installed to both sides of the doors with vulnerable architrave and framework also protected by Yeoman Shield products.This comprehensive, fire rated, door protection system will extend the life cycle of expensive fire doors helping to keep them in good working order.Yeoman Shield Guardian Handrails in the same colour scheme were fitted along the hospital passageways. Bespoke metal brackets were manufactured by Yeoman Shield to implement the spanning of the rail over pillars though out a glazed corridor.Beneath the handrail 2mm thick FalmouthEx Wall Protection Panels were fixed to offer low level protection. A cream colour was chosen for the panels accompanied by Mid Grey Corner Protection Angles to keep a light and airy feel to the scheme.Pete Trenchard, who specified and project managed the scheme on behalf of Sheffield Teaching Hospitals added “When carrying out improvements and refurbishment of the corridors, in line with the STH standard colour scheme and standard fit out, I was keen to incorporate the Yeoman Shield range of products to achieve a long-term solution.“The specification of Yeoman Shield products on corridor walls, vulnerable corners, doors, frames & architraves, protects the fabric of the corridors without detracting from the visible aesthetic appearance expected of a hospital environment.“I worked closely with the Yeoman Shield team through the design and specification phase, drawing on their expertise to find a cost-effective fit for purpose solution. The site survey and installation offered a start to finish package which has been contributory to the successful and well received outcome of the project”.

Premier Loft Ladders understand that ‘one-size does not fit all’. That is why our Designo and ISO loft doors are made-to-measure. These insulated doors are available in a wide range of sizes and can be fitted with security locks and other accessories. CAD drawings are now available for download from Premier Loft Ladders website.

Union Industries, the UK’s leading manufacturer of high-speed industrial doors, has completed a supply and installation project at Ragus Sugars, which manufactures bulk pure sugars for the food, beverage and pharmaceutical markets.

The existing 4-wing revolving door was found to be affecting the flow of traffic, due to the restricted compartment space trapping trailing luggage. It was important that the replacement door resolved this issue, whilst being in keeping with the Andaz brand and supporting their focus on sustainable operations. ASSA ABLOY recommended replacing the 4-wing door with a 3-wing model, with an increased diameter, which would comfortably accommodate the hotel’s foot traffic. Read more about this case study at the below link:

Hong Kong International Airport (HKIA), which first openedon 6 July 1998, connects around 220 destinationsworldwide with over 71.5 million passengers in 2019.Designed by Foster and Partners, the 550,000m2 terminalwas one of the most ambitious construction projects ofmodern times.Home to over 220 shops and 60 restaurants and with78,000 staff as well as millions of passengers, the airportrequired an ironmongery solution that could last severaldecades and meet the high-performance demands of oneof the world’s busiest international aviation hubs.Working in partnership with Hong Kong-based KeyTechnologies International Ltd (Key Tech), Allgood doorhardware was installed throughout PTB 1 after a detailedinternational tender to select the most suitable productquality, performance, and technical support of all providers.One of the largest ever ironmongery specifications at thetime, valued at over £1 million, this was the beginning of a23-year working relationship with Airport Authority HongKong (AAHK) where Key Tech continues to offer expertadvice, onsite technical support and parts supply for AAHKTechnical Services & Support Team.Today, despite the daily demands of a leading internationalairport, many of the original pieces of ironmongery remainin good working order. This is a testament to the qualityof the specification, the products and the open andtransparent exchanges of users’ requirements betweenAAHK, Key Tech and Allgood that has ensured continuedsafe operations at the airport for over two decades.Allgood’s Modric range was specified throughout theterminal in solid grade 316 stainless steel in all passengerareas and in back-of-house and staff areas. Modric uses premium quality materials and a precisionengineering process designed to createproducts which last. This commitment to qualityminimises waste by significantly extendinglifecycles and virtually eliminating the needfor repairs.While there is the normal wear from over twodecades of heavy usage, there are still noperformance concerns. No dropping of leverhandles, and the springing on lock cases allremain in full working order.An important upgrade was undertaken fiveyears ago as the airport wanted to enhance theholding force on the electromagnetic locks onall boarding gates to improve security. Key Techspent over four months identifying and trialling asuitable replacement that required the minimummodification to the original framed glass doorassembly and deliver improved holding forceand additional security monitoring features.The team also conducted a workshop withairport technicians and maintenance subcontractorsto ensure they were familiar withthe inspection and maintenance of the newelectromagnetic locks.HKIA was so impressed by the new solutionthat it has become the standard requirementand applied throughout PTB 1 and other newterminal buildings Allgood and Key Tech have maintained a positiveworking relationship with AAHK since theoriginal contract for the supply and installationof door furniture for PTB 1, in 1998. Supplying avariety of new items over the years, includingthe introduction of electronic cylinders to helpreduce the need for physical keys and introduceprogrammable access cards to the airport.Key Tech conducts regular technical workshops,and continually presents innovative productsto AAHK stakeholders. These services areviewed as essential in planning preventativeand corrective maintenance to keep the airportfunctioning smoothly.

Union Industries, the UK’s leading manufacturer of high-speed industrial doors, is increasing its support for customers with the appointment of an experienced project co-ordinator to oversee significant new build developments, including Customer Fulfilment Centres (CFC).

The goal for this residential dwelling in Salcombe was to create a completely unique space, nestled into the cliff-side to provide a feeling of comfort and seclusion, while maximising the views over the estuary. To achieve this, ten Reynaers aluminium lift-and-slide doors, alongside aluminium windows and single-entrance doors were installed. The aluminium frames provide the strength and stability required for large expanses of glazing, while delivering required pascal ratings to resolutely stand up to enduring winds and harsh coastal conditions. Pre-anodized paint adds further durability to protect the property from the elements.

Union Industries, the UK’s leading manufacturer of high-speed industrial doors, has supported a project at West Midlands manufacturer, Donghua Ltd, to eradicate heat loss from its warehouse, with the installation of a pair of its Bulldoor Rapid Rise Doors.

Located in the commercial heart of Belfast, Donegall Place, formerly a bank building, has been part of the city landscape for over 50 years. The 5-storey building expands over 82000 square ft and is comprised of both office and retail space, part of which has been the home to Boots since the 70s.Project Year: 2021Architect: GM Design AssociatesProduct: ASSA ABLOY RD100-3 Wing Revolving doorProject Background: In 2017, the Architect obtained planning approval to extend and refurbish the building and upgrade lobby areas, shop fronts and facades including the main entrance. Looking to install an EN16005 compliant manual activated revolving door with integrated air curtain, the main contractor, Graham Construction, got in touch FAAC Entrance Solutions to submit their proposal for this project.Solution: FAAC presented the RD100 Revolving Door as the best product for this entrance, not only for representing a more cost-effective solution, but also by installing a power assisted automatic door rather than a manual one, made for a safer and more user-friendly entrance, thus providing better value overall. With built in LED lighting and finished in Matt Graphite Grey, the new door complete with COBA Plan.a, the most durable entrance matting, now forms part of the modern and welcoming new entrance of 35DP. For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.All Pictures by Donal McCann Photography

Hannah Cecil-Harden is a director at de Gournay, a family business which was founded by her father, Claud Cecil Gurney. De Gournay makes the most beautiful hand-painted wallpapers and fabrics and the company’s work is found in some of the finest buildings around the world. As you would expect, every room of Hannah’s London home has been exquisitely decorated. The property has undergone many transformations in the time that Hannah has lived there, but the most recent changes were needed to accommodate her expanding family. Hannah and her husband wanted their house to work better for life with their four young children.All the floors of the house have been updated, but perhaps the biggest change was turning the existing basement into a playroom with adjoining utility and bathroom. Having worked with Hannah and the team at de Gournay on a previous project, Clement was delighted to be asked to manufacture the new steel doors that were included within the designs. We were excited that the new steel doors were to be painted in unique vibrant colours to match the stunning wallpapers that adorn the new space and we worked closely with Hannah and her team to find just the right match. We always say that our bespoke steel products can be painted in specialist hues from across the entire colour spectrum – these doors demonstrate what is possible!Hannah said: “I thoroughly enjoyed working with Clement Windows on this exciting project which was for a children’s playroom. I wanted to go with bold and bright colours and they were so accommodating about this, everything about the project was handled professionally and with utmost care from conception down to a flawless install. It was an absolute pleasure to work on such a personal project with a business I have collaborated with before and I look forward to hopefully crossing paths again in the future!”

In 2018, Cyclehoop designed and delivered two major Cycle Hubs for the London Borough of Enfield. These were the first cycle hubs to be provided in the borough and were delivered as part of the award-winning Cycle Enfield scheme.Both Cycle Hubs are steel and glass structures with CCTV and provide cycle parking for 50 bikes and three non-standard cycles such as cargo bikes. They can be accessed 24 hours a day, seven days a week by using an access card. Members can make use of a bike pump and repair stand so that they can make quick repairs and keep their tyres pumped whilst on the go.Cyclehoop is managing the membership of both cycle hubs on behalf of Enfield Council.Cycle Hub FacilitiesThe Enfield Town Cycle Hub and the Edmonton Green Cycle Hub are fitted with user-friendly cycle parking and repair facilities, as well as featuring an industry-leading security and access control system.Each Cycle Hub provides cycle parking for 50 bikes and is fitted with Optima Two Tier Racks. This is a space-saving solution that doubles the amount of cycle parking compared with traditional cycle racks. The Two-Tier racks can accommodate most types of bikes and feature gas-assisted moveable upper sections that make it easy to position them in the racking. Members can easily secure their bikes to the locking bar which has been welded into the design rather than the less secure bolted version in our competitors’ solutions. We have installed 3 ground anchors to accommodate non-standard cycles – each with its own marked out space.The door has been fitted with an industry-leading access control system allowing members to get in and out via access card 24 hours a day. Lighting and CCTV cameras are in operation throughout giving extra assurances of security.The Cycle Hubs also feature a Public Repair Stand and an Indoor Pump which provide members with the resources to make repairs on the go as well as pumping up deflated tyres.Design and Build ProcessEnfield Council chose two locations within the borough, each one connected to a local transport link, as well as amenities and shopping centres to accommodate the footfall. These locations were Enfield Town Railway Station and Edmonton Green Railway Station. Planning permission was required to develop the land.Enfield Council required two secure Cycle Hubs that maximised cycle parking spaces and the structure needed to be modular to allow it to be extended in future. Enfield is a growing borough that is regenerating and constantly growing, therefore this needed to be reflected in the design of the Cycle Hub.Each Cycle Hub is a steel and glass structure designed as a modern facility for securely storing cycles. The use of glass provides both good natural lighting as well as excellent visibility and passive surveillance, increasing the security of the facility.The Cycle Hubs also have a sedum green roof which reduces the surface runoff from rainfall, improves local air quality and supports the local insect population.The two custom and secure structures are comprised of:Toughened glass panesPerforated steel kick plates (over 3 tonnes of steel)Toughened glass sliding doorsLow maintenance sedum roofEnfield Council’s Deputy Leader, Cllr Daniel Anderson, said:“If we want to encourage more people to get on their bikes and change their transport habits we need to provide proper, secure parking for cycles. We hope these hubs will encourage people to get on their bikes to visit our town centres and reap all the benefits leaving the car behind will deliver. We are determined to encourage as many people as possible to use sustainable transport as we possibly can and these hubs will play an important role in helping us achieve that aim.”Enfield Council’s Cycle Enfield Scheme aims to regenerate and improve town centres, dramatically improve transport links and encourage more people to use sustainable methods of transport in the borough.

17 Esther Anne Place in Islington, originally a post office building, has been converted into luxury flats and warehouse style apartments. It is a development that builds on the richness and variety of the area, mixing Edwardian flair with modern living. It retains the redbrick facade of the sorting office at ground level, combined with a zinc-clad frame on the upper floors making it an eye catching centre piece to Islington Square. Product: Classic 99 Eclisse pocket door systems Location: Upper Street, Islington Developer: Sager / Cain Hoy Architect: CZWG Development: 169 private units Completion: Q4 2017

The bulk of the project, spread over seven large blocks, used DucoWall Basic to provide plant screening. One element, where higher level glazing needs privacy screening from the walkways below, DucoWall Classic W 50Z is installed inverted so that the areas gain maximum light without sacrificing privacy. Another challenge was to incorporate louvre doors into the plant screening areas without interrupting the aesthetic appearance. Here again a standard DucoDoor solution provided exactly what was required. The DucoDoor can use the full range of DucoWall blades to provide a beautiful and uniform result.

This is the latest cycle hub designed, manufactured, supplied and installed by Falco for Fairfield General Hospital in Bury, Greater Manchester. Installed on behalf of Northern Care Alliance NHS Foundation trust, the cycle hub is based on the flagship FalcoLok design and provides staff, visitors and patients to the hospital with secure cycle parking for up to 28 bikes.The FalcoLevel-Premium+ two-tier cycle racks are housed within a 6m x 4m version of the FalcoLok-500 cycle hub, complete with easy access automatic power doors, motion sensor LED lighting, helmet lockers, bespoke branding graphics and powder coating in an NHS blue RAL colour. The cycle hub is clad in toughened safety glass, designed to be sympathetic to the surrounding area.The whole shelter is a bespoke contemporary design of the classic Falco Cycle Hub shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!In addition to the cycle hub shown here for Fairfield General Hospital, Falco has also recently installed cycle hubs for many locations across the UK including Rochdale Infirmary, Stromness Travel Centre in the Orkney Islands, Crewe, Runcorn, Birmingham International, Warrington Bank Quay and Carlisle station for Avanti West Coast, Bradford Royal Infirmary and St Luke’s Hospital for Bradford Teaching Hospitals NHS Foundation, The Royal Oldham Hospital for Pennine Acute Hospitals NHS Trust, Ninewells Hospital & Medical School in Dundee and a bespoke cycle hub for Leicester City Council.For more information about the project here at Fairfield General Hospital or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

Bonny LGA, situated on the Atlantic coast of Nigeria, serves as a hub for the thriving Nigeria Liquefied Natural Gas (NLNG) industry, alongside hosting the terminals of various prominent oil and gas companies, including ExxonMobil, operating in Nigeria under the name Mobil Producing Nigeria Unlimited (MPNU).Recognising the critical need for heightened security in this strategic region, HAG stepped in to supply and install our advanced Armourguard and Alishield Range roller shutters across multiple locations in the Niger Delta, bolstering the security infrastructure of Shell premises and other key facilities. In addition to our installation efforts, we also conducted comprehensive training sessions for local representatives of the main contractor, empowering them to efficiently install and maintain HAG products, thereby ensuring sustained security enhancements on a supply-only basis.This collaborative initiative underscores HAG's commitment to providing innovative security solutions and fostering local capacity-building initiatives to safeguard vital assets and promote sustainable development in the region.

A luxurious multi-million pound beachfront development at Carbis Bay, just outside St Ives in Cornwall, fitted the KM750 Lift & Slide Handles from our BLU 316 Marine Grade Stainless Steel Hardware Range to prevent hardware corrosion issues that a coastal location brings.With such an amazing location, the architects responsible for the development were well aware of the impact the corrosive atmosphere could have could on the look and performance of the lift and slide door sets. A hardware solution was needed that combined faultless performance with the right aesthetics and protection from corrosion. The combination of quality, performance and their look and feel set these Lift & Slide Handles apart and they quickly became the obvious choice.Manufactured from 316 Marine Grade Stainless Steel, our BLU range of door and window hardware comes with a Lifetime Guarantee. They're designed to withstand the elements and thrive even in the most corrosive environments. As a result we're seeing more architects, more developers and more quality door and window manufacturers specify hardware from our BLU 316 Stainless Steel Range, which is a testament to its quality and performance.

After a £2m refurbishment programme, the British Motor Museum recently opened its stunning new hospitality and event facility. A showcase area, the Sky Suite boasts magnificent panoramic views over the Warwickshire countryside. Delivering flexibility to the suite, partitioning expert Style, was contracted to install two Dorma Hüppe Variflex semi-automatic, glazed moveable walls. Allowing the area to be quickly adapted to meet the needs of the day, the toughened glass panels are manually manoeuvred along a whisper-quiet tracking system. Once in place, powerful seals automatically expand to exactly the required pressure to ensure optimum acoustic integrity between the divided areas.

Inspired by traditional Belgravia garden squares, Chelsea Barracks is an exceptional development that will create an entirely new neighbourhood combining magnificent townhouses and spacious apartments with five acres of landscaped gardens, exclusive shops, fine-dining and state-of-the-art leisure facilities. It has been under construction since 2019 and it due to be completed in 2024.Chelsea Barracks represents a historic collaboration between world-renowned architects, best-in-class landscapers and the finest craftsmanship. It is the most coveted neighbourhood in London.It is a development of 440 residential luxury apartments, penthouses and townhouses. It cost £3bn to build and was the most sustainable developments in Europe in 2021, attaining LEED platinum certification for green building.The design and quality of finish in the properties is extremely high end and includes high spec finishes including natural stonework finished by Italian stone Artisans, bronzed ironwork balustrades inspired by the botanical prints of William Morris and elegantly crafted wooden floors and bespoke cabinetry.ECLISSE UK supplied 250 bespoke pocket door systems, including Classic singles and Classic doubles with accessories, to the project and they were predominately used in the bathrooms and living rooms. Classic singles were used in bathrooms to create more space where the arc of standard hinged doors would have otherwise encroached on the space. This allowed more space for larger shower enclosures and enhanced room layouts. Double pocket doors were used to create more space and enhanced layouts in the living rooms to allow furniture to be placed closer to the edges of the room to create more spacious layouts that feel bigger. Product: 250 bespoke Classic Pocket Door System with accessoriesLocation: Chelsea Bridge Road, London, SW1W 8RGDeveloper: Qatari Diar GroupArchitect: Masterplanners - Dixon Jones, Squire & Partners and landscape architect Kim WilkieDevelopment: Over 440 two to Seven bedroom luxury residences and townhousesCompletion: The development is being completed in phases with the final phase expected to be completed in 2024.Image Source: Savills

It was a pleasure for all involved to work on this outstanding project, an original Arts and Crafts home which has been impeccably refurbished.The recent works included extending the house, as well as opening up and changing the layout. The interior has been modernised with a contemporary touch, but cleverly retains and enhances the home’s character. The interior design of the whole home is stunning. The bedrooms and bathrooms have been individually designed and are unique to their user. Mural wallpapers, vibrant pops of colour and striking, high quality fixtures and fittings help achieve this.A combination of leaded EB20 steel windows and W40 steel doors with genuine T bars were chosen to replace the external fenestration. The new windows and doors have slim, elegant frames but bring the benefit of improved thermal efficiency and security. Internally, a bespoke W20 door screen has been used to divide the kitchen and dining area.Both the client and architect are delighted with the outcome. Steven Harp from Harp and Harp said: “This project involved a delicate balance of modernising a home that had been barely touched in a century for 21st Century family life whilst trying to retain the beautiful Arts and Crafts character and charm of the original house. The new doors and windows by Clement were a perfect product to fulfil this brief, providing modern standards or thermal comfort with an aesthetic and quality that blended seamlessly with the elegance of the original metal windows that were still on the house.”The client said: “I was initially unsure about changing the fenestration and doors in our property, as they are such an important part of the building’s character, history and aesthetics. However, from our first meeting with Clement Windows, who were recommended by our building surveyor, I knew I needn’t have worried. They talked us through the different options in detail, provided extensive designs (and were always prepared to amend and refine these subject to our thoughts!) and also worked seamlessly with our architects to ensure that all we asked for was delivered and more. The finished product far exceeds any expectations that we had for windows and doors that matched our original steel windows and doors, now giving us the perfect look for the house with the added bonus of double glazing and additional safety and security. Their communication throughout has been excellent and we have felt looked after every step of the way. Installation was done ahead of schedule and the only issue we’ve had post installation has been dealt with efficiently and they have always had someone available to pick up the phone to us and come to site when needed. Really cannot recommend this wonderful company enough, for both their products and the overall experience. Thank you!”

Located within easy distance of the University of Edinburgh, this six-storey development provides 52 studio apartments for the city’ vibrant student community.Designed by Yeoman McAllister, the stone clad building complements the existing architecture of the area, while the high-performance aluminium fenestration package from Senior Architectural Systems provides a modern and compliant solution.Senior’s thermally-efficient SPW600e aluminium windows, installed with Louvre Guards in front of the opening lights, have been used throughout, combining a robust and secure construction with slim frames to frame far-reaching views of the city and ensure effective levels of daylighting. The main and communal areas benefit from Senior’s slimline SF52 aluminium curtain wall system and low U-value PURe® Commercial Doors.Senior worked closely with main contractor Clark Contracts and fabricator partner GG Glass to deliver the scheme which has received wide praise for the quality of its accommodation and convenient links to several of Edinburgh’s main university campuses.

Architects HLW reached out to the Radii Pre-Construction Design team back in September 2021 with their design intent for a really unique glazed partition project for British multinational retail company Kingfisher.With the client being the home of many notable DIY and home improvement brands such as B&Q and Screwfix, HLW’s initial design aimed to create a ‘workshop’ aesthetic to the space through a combination of timber doors and upstands with glazed windows.The final design required steel framework to support the glazed windows and create the timber upstands.Radii’s Product Development Department developed this detail with the Pre-Construction team and conducted virtual stress testing to ensure the structures would be adequate to support the weight of the glass.The bespoke nature of the design and system meant that acoustic assessments needed to take place before the system could be specified for the project.Radii’s internal acoustic team helped to develop the design and conducted our own assessments, before the system was externally assessed by a third party to provide certification to the architect.

WJL Contracts have been providing high-quality, bespoke joinery solutions to some of the largest contractors in UK construction for over forty years. Known for their expertise and design flair, their fire-rated doorsets and panels have been installed in prestigious building projects spanning the education, entertainment, and commercial sectors. They also offer a full installation service which ensures that their fire-rated and acoustic products are installed competently, setting them apart from a lot of other joinery manufacturers. One of these projects was for Crawley Town Hall in West Sussex on behalf of Kier construction. They successfully delivered bespoke joinery and acoustic panelling doors, an elliptical ceiling, a feature wall, mirrors and kitchenettes. The team overcame significant challenges to hit the deadline including managing the installation of 2700 large 2.7m doors.Fire and Acoustic Seals Fire Door FoamTM and Intumescent Acrylic Sealant were used to install all fire-rated doorsets to guarantee their compliance. Joel Mayer, Buyer & Commercial Manager at WJL comments“We’ve been using Fire and Acoustic Seals’ own-label Fire Door FoamTM and Intumescent Acrylic Sealant on our large construction projects for many years. Our team particularly like the Fire Door FoamTM because they think the quality is excellent compared to others on the market, it’s quick and easy to install and it’s backed up by specific fire door test evidence.We also love the service we get from the team at Fire and Acoustic Seals which is why we’ve continued to work with them for over a decade. They’re incredibly reliable and have a fast turnaround service which ensures our onsite team are never without the products they need when they need them. This is really important to us as we are constantly working to tight deadlines.” For more details about this and other WJL projects visit https://wjlcontracts.co.uk/portfolioContact our team for more information about Fire Door FoamTM and Intumescent Acrylic Sealant.0121 521 2179 | sales@fireandacousticseals.co.uk 

'The Portal' is a new £16 million public services hub in Ellesmere Port, delivered by Vinci Construction UK for Cheshire West and Chester Council. The new facility will be home to more than 500 council and public sector staff, a Job Centre Plus and a Citizen’s Advice Bureau.The building has been constructed with many environmentally friendly elements including solar panels, air source heat pump and electric vehicle charging points. The Portal’s envelope is wrapped at the top and bottom with an attractive, copper coloured metal cladding and a newly formed public realm area will surround the exterior, with bench seating and green landscaped sections.Internally, 'The Portal' consists of large open plan working areas with smaller subsection meeting rooms, break out and kitchen spaces which are present on each level and a main central staircase for circulation.Metal Technology Ltd supplied its 10-35Hi+ commercial entrance doors and System 17 capped curtain walling for the large, glazed sections of the build to approved fabricator and installer RED Systems Limited.Due to open its doors in Spring, it’s fantastic to have been involved in this state-of-the-art, commercial project, which is a catalyst for the wider Ellesmere Port Town Centre regeneration master plan.

The Renaissance Retirement Apartments in Marlborough, comprises of 28 luxurious one and two bedroom luxury later living apartments. Very close to local amenities and overlooking the bowls club, the development has been designed to be not only a luxurious residence but provide a new lifestyle. The project makes excellent use of the Eclisse Classic Double Telescopic door system to achieve harmonious flow between the living area and the dining area.Image Source: www.renaissancegroup.co.ukDevelopment: 28 Retirement ApartmentsProduct: 11 Classic Double TelescopicsLocation: The Old Yard, London Road, Marlborough, SN8 2APDeveloper: Renaissance Retirement LtdArchitect: Aspire ArchitectsDevelopment Completion: Q4 2017

2021 sees Rolls Royce unveil Testbed 80, the world’s largest & smartest indoor aerospace testbed, as part of a £90million investment. It has been a hard year for the aerospace industry, with production slowing, and cuts in jobs, however this ground breaking facility shows Rolls Royce’s confidence in the future of aerospace for decades to come.HAG Ltd. have proudly worked alongside Buckingham Group to assist in this ground breaking facility that will not only test propulsion systems of the future, but also secure jobs in Derby, UK for many years to come.HAG Ltd. were tasked with designing & manufacturing a roller shutter for this distinctive & state of the art facility, to enable Rolls Royce to test the largest, smartest and most powerful engines in the world by MDS Aero Support Corporation of Ottawa, Canada.HAG Ltd. designed, manufactured and installed 2 Armourguard F1 insulated roller shutters that were 7.5m by 15m. The F1 model is a high quality insulated security shutters delivering the highest level of security and offering thermal protection. A composite of foam filled sections is encased in a flat double skinned interlocking galvanised steel lath.The project:£90million project3 years of construction7,000 square metres, the same size as a Premier league football groundHouses the world’s largest exhaust pipeContains 3,218 tonnes of steelAnd 27,000 metres3 of concreteEquipped with a 40,000 litre fuel tankCapable of testing engines on Sustainable Aviation FuelThe most capable & complex testbed ever designed & builtWarren East, Chief Executive, Rolls-Royce, said: “Testbed 80 is the largest facility of its type in the world. However, it is not only big, it is also smart and features the most advanced testing technology we have ever used. As the new global hub of our testing capability, it will support the next stage of our UltraFan programme as we begin ground testing the first demonstrator in 2022. This incredible piece of infrastructure is a very visible sign of our commitment to this site and secures the future of Derby as the home of large engine development, continuing a history that began in the late 1960s with the RB211.”HAG Ltd. are proud to be part of this monumental development in the aviation industry.

At SharkNinja’s flagship offices within the iconic Battersea Power Station development, partitioning expert Style worked with Bowman Riley architects, and contractor, Ben Johnson Interiors, to create flexible internal space to meet the working needs of this forward-thinking company.A Dorma Hüppe Variflex glass moveable wall divides a section of the café, creating a large meeting room. A solid Variflex wall allows the space to be further divided into two smaller areas.This chic solution perfectly complements the contemporary décor whilst the impressive acoustic ratings of the walls of 52dB and 55dB respectively, provides exceptional privacy when the café is busy. The semi-automatic operation of both systems ensures the acoustic seals are always applied to exactly the correct pressure whilst improving ease of manoeuvrability for staff.SharkNinja, is the maker of class-leading Shark® vacuums and the innovative line of Ninja® kitchen appliances, positively impacting daily life in homes around the world. The new offices at Battersea Power Station spread over 25,000 square feet and forms a key part of the company’s continued expansion.Style is the UK’s sole distributor for both Dorma and Skyfold partitioning walls, offering specialist solutions for all requirements and budgets across multiple market sectors.In addition to the two Dorma Hüppe Variflex walls, Style also installed a simple, yet highly effective manually operated folding wall in the demonstration room, allowing the space to be divided into two separate areas, when required.“This is a great example of how different types of moveable walls suit different requirements,” said Michael Porter, Style’s group sales director.“As a key area for gatherings and meetings, the combination of the glass and solid Variflex systems was perfect for the café area as it maintains an open plan feel, and a very stylish design, while also offering the practicality of being able to create adaptable meeting rooms when required.“In the demonstration room, the requirements were specific, and the folding wall was just what was needed to create simple space division.”