"air filtration equipment"

For pristine sound, a manufacturer of hi-fi amplifiers relies on air springs from ACE. This effectively eliminates disruptive ambient vibrations that enter the demonstration room from a neighbouring workshop and disturb the listening experience. The PLM-1 air springs, which have a low natural frequency of 3 Hz, are used as a bearing in the hi-fi rack for decoupling. ACE was able to prove the effectiveness measurably with the company's own app VibroChecker PRO. In the meantime, the manufacturer offers the high-end amplifiers optionally with the air springs and the app from ACE to the end customers.

The construction of a new pig unit has enabled Anthony Robinson to build on the early success of his new pig finishing business. Profile 6 roofing sheets were used on the build to help with insulation and reduce the high levels of condensation to ensure optimum pig performance, and help reduce the build-up of dust and air-borne bacteria. As such, a raised, protected open ridge has been installed on the build to help draw in fresh air from the sides of the shed, forcing stale air up and out through the top of the building.

Products: Flexi heavy – Modular Frameworks & Flexi Access – Bespoke access platforms. Services: Air-handling units & associated access requirements. Roof build-up: Warm roof design – PIR/PUR insulation with PVC/TPO field membrane. Pump House were proud to have been chosen as the preferred supplier of building services support systems to the project, with support frames required to fourteen rooftop air-handling units. Each framework was also accompanied by a bespoke access platform to one longitudinal side of the air-handling units for maintenance purposes.

The crown line for the Herringbone E931 has been set out very well, however the floor has not been protected and the equipment has been left on the new floor.The actual floor will easily get damaged and the client will probably end up with a damaged floor and probably expensive repairs because of the lack of care.What should happen is that the floor should be covered at all times, and the site kept clean, with adhesive and other equipment kept off the new floor, that has been fitted

Revolving doors from dormakaba act as a lobby reducing noise, dirt and drafts in Emirates Arena. The KTV automatic revolving door can limit warm air loss and cold air intake – vital on the Velodrome’s exposed site - helping to reduce the building’s energy consumption and costs.

Overview A collaborative project with our long-lasting customers Jet Environmental Systems resulted in the successful installation of three HEM-SLx 525kW heat exchange modules, aimed at providing warehouse heating for a prominent automotive component warehouse in Ellesmere Port. The project involved a bespoke-designed air handling unit (AHU) expertly manufactured by Linton Services Ltd and delivered as a comprehensive turnkey heating solutionBackgroundThe warehouse had a substantial floor area of 39,000m2 and a volume of 760,000m3. The main requirement was to maintain an internal temperature of 16C degrees, even during outdoor temperatures as low as -4C degrees. To ensure efficient heating and uniform distribution throughout the space, a HEM-SL heating solution with a capacity of 525kW and an airflow of 37.5m3/s was needed. The client preferred natural gas as the heating fuel, which Jet Environmental incorporated into their custom-designed air handling unit (AHU) manufactured by Linton Services Ltd in Presteigne.SolutionThe warehouse layout and heating load necessitated the use of three air-handling units. To ensure a reliable and robust heating system, Jet Environmental selected Powrmatic as the heating supplier. Jet Environmental, Linton Services, and Powrmatic have a longstanding relationship and extensive knowledge of each other’s businesses. This familiarity ensures seamless integration of their products and expertise.Each custom-designed HEM unit was manufactured in the UK at Powrmatic’s manufacturing in Ilminster, Somerset. By choosing British-built products, customers can have confidence in the reliability, durability, and adherence to strict industry standards. Each HEMx unit is custom made with a wide range of kW and size configurations and has been adapted to suit the needs of the OEM and AHU industry by the provision of its slot-in casing arrangement.ResultThe collaborative efforts of Jet Environmental Systems, Linton Services, and Powrmatic resulted in the successful implementation of an efficient heating solution for the automotive component warehouse. The customized AHUs, designed by Jet Environmental and manufactured by Linton Services, effectively delivered the required heating capacity to maintain a consistent internal temperature of 16C degrees. Powrmatic’s reliable heating equipment ensured optimal performance and met the client’s expectations.The client was impressed with the comprehensive turnkey solution provided by Jet Environmental Systems. They were particularly satisfied with the partnership between Jet Environmental, Linton Services, and Powrmatic, which demonstrated a deep understanding of their businesses and the ability to deliver a reliable and efficient heating system.Overall, the successful completion of this project showcases the expertise that Powrmatic has in providing effective warehouse heating solutions for industrial applications.

Products: Flexi heavy – Modular Frameworks Services: Air-handling units. Roof build-up: Warm roof design – PIR/PUR insulation with bituminous felt membrane. The air-handling unit support frames were supplied via a wholesaler in Hampshire to the building services engineers working on site. There were four large air-handling units to support in total, all circa 6000kg in weight each. All our frameworks were designed to manage the imposed loads of the AHU sections being supported, to ensure uniform load distribution through the frame feet was achieved.

For us, creativity and sustainability in design and architecture are of great importance. We believe more and more people should be aware of the opportunities that new technologies can provide them, so we asked our partners to share more on the role of innovation in the pursuit of sustainable development, and guess what? Our carbon-neutral functional paints make it to the list. A smart home can also help reduce our carbon footprint. This can be done technologically - by integrating a variety of sensors (for indoor air quality, carbon monoxide and dioxide, proper lighting, temperature, etc.), as well as by integrating more innovative interior solutions - the use of carbon-neutral writable whiteboard paints, such with magnetic properties or interior paints that purify the air. One of the last such examples are our carbon neutral functional paints. ESCREO whiteboard paint gives people the chance to optimise unusable surfaces - which are otherwise so attractive, especially for the little ones! The creation of writable whiteboard surfaces frees us from the need to invest in other tools for organisation, planning and drawing, so we reduce our consumption of hard-to-renew resources and those that often cannot even be recycled. Soon we will be taking it to a new level by launching an air purifying paint - ESCREO Clean Air - a non-toxic environmentally friendly interior paint that purifies the air in any room. The ingredient in the paint is an enriched natural mineral that attracts and neutralises harmful air pollutants, including volatile organic compounds (VOCs), odours, airborne chemicals and CO2.

OverviewPowrmatic was selected to supply a frost protection warehouse heating solution for a massive 81,000m² building at Plot 2 at the Midland Logistic Park installed by Phase Mechanical Projects. a combination of 7 TE61 heating units and TE61 Destratifcation units were installed.Project BackgroundThe 81,000m² industrial logistic warehouse required frost protection with design parameters of -5°c external and +5°c internal.SolutionOne of our largest installations to date, 4 x TEG61 air rotation heaters were installed by our trusted partners Phase Mechanical Projects. Each TEG61 heaters boasts an impressive 525kW of heat output and were installed alongside 3 x TE61 destratification units to assist with the air turnover due to the size of the building. The 4 TEG61 heater units selected were designed to move 39m3/s of air around the building per unit, and when combined with 3 TE61 destratification units also at 39m3/s this gave a total air volume of 270m3/s which achieved the required 0.8 air movements per hour from the end client.ResultThe newly styled Powrmatic Air rotation units in our new RAL 7015 colour were installed expertly by Phase Mechanical Projects. The racked logistic warehouse will now benefit from a frost protection system which will protect the internal sprinkler system from freezing in the colder months. Each T.E manufactured at Powrmatic is custom built to specific project requirements.

Owned by Shaanxi Tianhong Silicon Materials Co. Ltd., the Shaanxi Yousr Polysilicon Plant in China will produce polycrystalline silicon material for the solar photovoltaic and electronics industries. When engineering company Fluor was asked to design the plant, it was faced with a specific challenge.Much of the plant’s pipework and equipment is exposed to high temperatures, making it prone to corrosion under insulation. Fluor knew that conventional anti-corrosive solutions are often not able to protect equipment in these conditions, and the company was looking for an alternative but reliable and proven coating solution.Fluor chose our Versiline CUI 56990 coating to provide long-term protection for pipework, equipment and other hot surfaces. Versiline CUI 56990 can resist temperatures up to 650°C/1202°F and thermal shock and cycling in dry or wet service conditions. Versiline CUI 56990 is extremely resistant to micro-cracking and corrosion, even in tough operating conditions.

We designed, supplied, installed, and surfaced this new playground in East London, with the project completing in December 2023. The customer was looking for strong, durable, and attractive looking equipment, and our stainless steel range from Spiel Bau was perfect for the requirement. Spiel Bau equipment comes with lifetime guarantees on stainless steel elements, and has been designed to provide excitement and challenge for children of all ages.The centrepiece unit, the Beeskow multiplay, features two decks linked by an inclined rope bridge, monkey bars, a fireman’s pole, traditional slide, rail slide, and an overhanging climbing wall. The stainless steel uprights combined with hardwood robinia decking and panelling gives a beautiful, architectural finish. The large size and wide variety of play features ensures a high number of children can use the structure at any one time, making it a great piece for parks in high use areas such as this.The multiplay was complimented by two stainless steel climbing frames, the first a crow’s nest look out tower and the second an linear, obstacle course style structure. A stainless steel rope end swing, Stainless Steel seesaw, Zip Wire, and two springers rounded off the equipment, all of which was surfaced by our inhouse surfacing teams with black and green fleck wet pour rubber. We loved working on this project, introducing high quality equipment and surfacing to a park in much need of redevelopment.

Products: Flexi light, Flexi heavy & Flexi access. Services: Plantroom, Generator, Air-handling units, VRF condensers and bespoke access solutions. Roof build-up: Inverted roof design. The mechanical services contractor on the project, had a number of different heavy building services that required supporting. This included a 6000kg plantroom, 6000kg generator, two 4500kg air-handling units and a 1150kg air-handling unit. Utilising our Flexi-Heavy Duty range of supports, we designed and calculated individual frameworks for each item of plant, paying particular attention to ensuring that the correct load management through our frames.

Products: Flexi Everyday – H Frame Kits and Flexi-Feet, Flexi Light – Base & Extender frames, Flexi heavy – Modular Frameworks & Custom Frame Services: Cable trays, Ducts, A/C Splits & Air-handling units. Roof build-up: Warm roof design – PIR/PUR insulation with PVC/TPO field membrane. An assortment of products was required to support various services such as cable trays, ductwork, condensers and air-handling units. In addition, due to one of the air-handling units being extremely wider than usual, we also had to manufacture a bespoke custom framework for this item.

As concerns about environmental sustainability continue to escalate, the concept of Passive House (Passivhaus) design has emerged as a game-changer in creating energy-efficient buildings.This innovative approach focuses on maximizing a structure’s energy efficiency while maintaining optimal comfort for its occupants. One key element that can complement and enhance Passive House principles is the incorporation of automatic doors.Understanding Passive House DesignPassive House design revolves around stringent energy efficiency standards. It employs various techniques to minimize energy consumption, such as superior insulation, airtight construction, high-performance windows, and heat recovery ventilation. These elements work harmoniously to create a building that requires minimal energy for heating or cooling, leading to significant reductions in carbon emissions and energy costs.The Role of Automatic Doors in Passive HouseAutomatic doors might not seem like an obvious addition to Passive House design, but their integration can significantly contribute to its efficiency goals. Here’s how:Controlled Air Exchange:Passive House principles emphasise airtightness to prevent energy loss. Automatic doors, equipped with sensors and precise control mechanisms, can efficiently regulate the airflow, allowing for controlled ventilation while minimising the loss of heated or cooled air. This feature ensures that the building maintains its airtightness while providing necessary air circulation.Energy Conservation:By automating the opening and closing of doors, energy loss due to unnecessary drafts or human error is minimised. The doors swiftly close after use, reducing the transfer of heat or cold air between different zones within the building. This helps in maintaining the indoor temperature, contributing to the overall energy efficiency of the structure.Accessibility and Comfort:In addition to energy efficiency, automatic doors significantly enhance accessibility, ensuring ease of entry and exit for all individuals. The seamless operation of these doors adds convenience and comfort to occupants while aligning with the core principles of Passive House design.From revolving doors to sliding doors, we have just he solution for your energy saving needs. We help our clients save energy because we know how important it is to cultivate a sustainable future and reduce environmental impact, while simultaneously promoting cost-effective and efficient solutions for their individual needs. Find our new energy saving FAAC sliding doors here solutions here, and energy saving data here.ConclusionPassive House design has revolutionised the way we approach building construction, emphasising sustainability and energy efficiency. The incorporation of automatic doors complements these principles by enhancing airtightness, energy conservation, and overall occupant comfort.In the pursuit of creating eco-friendly and energy-efficient buildings, integrating automated systems like doors not only aligns with Passive House standards but also sets a new benchmark for sustainable architecture. These technological advancements not only serve functional purposes but also play a pivotal role in reducing environmental impact while prioritising the well-being of the building’s occupants.Check out more of our Energy Solutions.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

Indoor Climate and air quality control to manufacturing facility

Charles de Gaulle Airport is the largest airport in France and one of the busiest airports in the world. The aim of the project is to extend and modernize the airport facilities to be able to accommodate a larger number of passengers and increase the air traffic to reach the milestone of 80 million passengers per year. Effisus Ecofacade solution was the integrated solution to ensure water and air tightness of façade’s connections in Terminal 2B.

A wide range of high quality outdoor furniture, play equipment and cycle parking products from Broxap Street Furniture complement the landscape at Kingsbrook View Primary Academy.

Bender UK delivers critical power supply solutions and equip four state-of-the-art theatres at the new £100 million The Harborne Hospital, part of HCA Healthcare UK.  

The King Edward VII Galleries is a Grade 1 listed structure and part of the iconic British Museum complex in London.Constructed between 1907 and 1914, the building sits above a series of tunnels and ventilation shafts, which serve to supply air to the gallery via an external ventilation unit.Due to water ingress in the tunnels, there was serious concern as to the quality of air supplied to the gallery, and the impact that this might have on the artefacts kept there.

This year, the playgrounds in Kazincbarcika are being beautified again. The refurbishment across the city's 22 playgrounds began this spring with the replacement of rubber coatings and the refurbishment of sandboxes, followed by the necessary repairs to equipment and structural elements. The work is expected to be completed by autumn.With the arrival of spring weather, many are eager to spend time outdoors, and families with young children enjoy spending time on playgrounds. Among the city residents we surveyed, many consider the area around the Boating Lake a prime destination due to its proximity to nature and the presence of a playground nearby.It is important that children can play in the safest, well-maintained environment possible. Barcika Park Nonprofit Ltd. is responsible for the operation of 22 playgrounds, which include 220 play equipment. The company's staff continuously repair any detected faults and deficiencies, and they annually review the condition of the playground equipment. Some of the equipment is repaired on-site, while others are taken to their workshop for repairs after transportation.Parents can also assist the professionals with their observations through the city's official mobile app, KolorApp. Thanks to these reports, it was discovered that the rubber coatings on the playgrounds were worn and damaged, prompting the company to replace all of them for the safety of the children. Additionally, they regularly rake the sand surfaces, disinfect and refill the sandboxes, and refurbish or install new playground equipment, as communicated by Márton Rosza, the construction group leader at Barcika Park Nonprofit Ltd."The major replacements and repairs, for example, are taking place at the Barátság Square playground, the Völgy Street playground, the Instrument Technician Street playground, and in the Völgy Park. Currently, the replacement of spring toys, balance swings, and swinging swings is underway. We strive to show the residents potential innovations," stated the expert.Márton Rosza added: His colleagues also take care of emptying waste containers, managing green areas, caring for vegetation, and cleaning sandboxes, shock absorbers, and coatings. Safety is also ensured by a regulation that mandates a triennial review of the playgrounds, which is always performed by an expert company. Thus, everything necessary for uninterrupted and high-quality relaxation is available in Kazincbarcika. However, during the maintenance work, they ask for the patience and cooperation of the children and their parents.

We were delighted to be commissioned to provide a complete playground regeneration project, for a prestigious school in Sussex. The current play facilities were starting to feel dates, and the school wanted some fresh, colourful and natural themed equipment and surfacing to reenergise the areas.3 different areas on the site catered to various age groups, and the level of challenge on the equipment reflected this. A mixture of climbing, trim trails, multiplays, a zip wire, and some tall slides will make playtimes fun for many years to come. Equally, the safety surfacing was designed to be colourful and informative, with inlaid graphics featuring windmills and electric charging points on the track helping reinforce the importance of a low carbon future.

Facade automation for replacement air intake and smoke extraction in accordance with EN 12101-2

Located within the Kirtley building, close to the cycle storage compound, are changing facilities with a number of showers, hairdryers and mirrors. As part of the upgrade to these facilities, the University has installed Heated Z Lockers. The shape of these lockers was chosen so that the user has the full height of the locker to gently dry their clothes and equipment that they used to cycle to university.This unique shape makes them the perfect design for heated lockers. Simply hang your damp clothes inside and let the Heated Z Locker do the hard work. Air flows easily inside the locker, with a perforated base, and perforated slots at the top allow the damp air to escape. Single and twin tube heaters are available, with the heat source plugging into a 3-pin power socket, or wired into a fused switch.A range of materials and colour finishes are available, and the University of Derby chose Laminate Z Locker doors in two colours. Laminate is a great choice of material as it creates a more Heavy Duty locker less likely to scratch, dent or damage.With a large range of laminate manufacturers, including a carbon-neutral laminate supplier, our Heated Z Lockers can be a bright pop of colour through to a neutral wood affect laminate. The University of Derby chose two contrasting laminate colours in colours Sage and Elegant Grey from BioCarbon Laminates, providing a modern look to the Z Lockers. The lockers were also manufactured with seat stands, with the slats matching Elegant Grey door colour from BioCarbon Laminates.We can also provide a range of accessories, from multiple lock options through to wrist straps, particularly popular with leisure centres and gyms. The project at University of Derby included oval laminated numbering, Lowe & Fletcher coin return locks and grey wrist straps.The university were very pleased with their Heated Z Lockers, and we have since been back to measure up for some more laminate lockers. It was great for our team to work with University of Derby on this project, and we look forward to returning for the next project soon. If you need some Heated Lockers or want to find out some more information about our range of products, call 01284 727626 or contact us here.

Another housing refurbishment is set to benefit from the high-performance Roofshield breather membrane. The world-renowned Roofshield membrane from the A. Proctor Group has long been recognised as a first-class roofing membrane solution, providing a pitched roof underlay that is air and vapour permeable.Specialist roofing company S & J Roofing in Bath has been providing roofing services since 1981 and has established a reputation for high-quality roofing work for all kinds of domestic and commercial works, from restoration to complete new re-roofs down to minor repairs.Naomi Richards of S & J Roofing commented, “we have used Roofshield on many of our projects, Roofshield will always be our number one go-to product. Using Roofshield leads to savings in both labour and material costs, keeping the installation team and customers happy. Roofshield was the most cost-effective solution to control the interstitial condensation in a pitched roof. Roofshield is the most reliable product on the market, so it is used on every one of our projects.”Roofshield is a unique, three-layer, nonwoven, spunbonded, polypropylene breather membrane with a patented melt-blown core, and it provides a secondary barrier to the ingress of rain, wind, and snow. Designed with a low vapour resistance, it is air-permeable, with the additional benefit that it eliminates the incidence of interstitial condensation in pitched roofs.The exceptional performance of Roofshield has been successfully incorporated in many of the most demanding locations worldwide. Its characteristics allow pitched roofs to breathe without needing air gaps or secondary venting. Its patented SMS (Spunbond Meltblown Spunbond) structure allows high levels of airflow and the transport of moisture vapour, making the formation of condensation in the roof space virtually impossible. Numerous vapour underlays use an airtight VP film layer to achieve their performance. However, the exceptionally high vapour permeability and air permeability of Roofshield means that it can perform in conditions in which air-tight alternatives will not.The exceptional air permeability performance of Roofshield means that the roof space will result in similar air changes to that of a roof using traditional eaves/ ridge ventilation. Therefore, another advantage of incorporating Roofshield into the roofing design is that it can lead to savings in labour and material costs due to removing the need for these vents as well as a separate VCL at ceiling level.

The two access control systems from SIEGENIA for house and apartment entrance doors leave no desires unfulfilled: the keypad and the fingerprint scanner combine elegant design with maximum ease of use and efficient access management for the building. They are therefore an ideal solution for the increasing demand for smart home applications in private housing construction. The two systems are equipped with a comprehensive access log, simple, clear user administration as well as a rechargeable battery-buffered timer. The emphasis is on ease of use – e.g. with a simple touch of the finger on the fingerprint scanner or the standardised equipment with integrated WIFI and Bluetooth technology. This enables both the use of the smartphone as remote control as well as convenient control and administration with the aid of the SIEGENIA Comfort app. 

GEC Anderson stainless steel back bar counters and units were specified for the Foyer Bar and Mezzanine Kitchen at landmark London theatre, the Lyric.Mica architects were asked to handle the extensive refurbishment and GEC Anderson were awarded the contract to supply and install their specialist back bar equipment. Although the overall area of the bar is quite large, including all of the required items and equipment within its confines was quite challenging. Careful planning and design was necessary to achieve it and some unique fabrications and inventive use of available space were needed. Careful co-ordination and liaison between the GEC Anderson, the theatre and the design team enabled the end result to be realised.

Re-designed by Schmidt Hammer Lassen Architects, Metalskolen conference centre on North Zealand, Denmark, has undergone a complete transformation. The new, contemporary interior features a total of 2,300m2 15mm Oak Classic plank flooring, fitted throughout circulation and breakout areas as well as in all conference rooms. Delivered unfinished, the solid oak flooring was finished on-site using Junckers’ Rustic Oil in White to create a pale floor which reflects a lot of natural light. True to architectural traditions commonly applied in the Nordic countries, SHL has created an inclusive and nurturing space, providing the perfect setting for learning, reflection and relationship building. Not only concerned with light and aesthetics, SHL base their work on democracy, welfare, sustainability and social responsibility, a commitment which results in buildings with a high degree of wellbeing. A light-coloured floor helps enhance lighting levels, reducing the need for artificial light and therefore saves energy. In contrast to a dark surface, which absorbs and holds heat and subsequently releases it back into the room, a pale floor will not contribute to overheating, reducing the need for air conditioning systems. With a perfectly smooth surface, a solid wood floor from Junckers cannot harbour dust or mites. As an all-natural material, wood contributes to an even and balanced indoor climate as it helps maintain temperature in a room and reduces static from any electrical equipment. Junckers’ floors hold the Danish Indoor Climate label and have undergone extensive degassing and odour testing to ensure there are no chemical substances in the flooring. Junckers also complies with EU legislation REACH. 

Eternit’s fibre cement open protected ridges were used to create an effective ventilation system in the bull accommodation unit at Knocknagael Bull Stud Farm - ensuring a constant outflow of stale, moist air. The width of the air gap created by the open ridge was specifically designed for the number of bulls and size of the building. Profile 6 sheeting from Eternit was also specified for the roof, thanks to its durability and low maintenance costs, as well as its noise insulation properties.

This leading private hospital offers rapid access to the very latest diagnostic equipment and tests, including CT, MRI and PET scanning. It has five main operating theatres, a fertility lab and a cardiac catheter lab.

ChallengeFor the air traffic controllers at Birmingham Airport, concentration is critical to ensuring the safety of the hundreds of passenger jets that take off and land every day. Studies show office workers lose concentration when noise levels hit 55dB; however, the sound of just one medium-sized aircraft descending at 1,000ft is 70dB.SolutionWith this in mind, noise reduction was an essential factor in the specification of the insulation for the 105ft air traffic control tower. The airport’s developers consulted Knauf Insulation’s Technical Support Team for advice. The Technical Support Team recommended Rocksilk® RainScreen Slab, a non-combustible Rock Mineral Wool insulation designed for use in high-rise rainscreen façade systems.Mineral Wool insulation has superior acoustic performance because of its open structure, which traps sound between the individual strands and turns it into heat energy.Rocksilk® RainScreen Slab is quick and easy to install and adapts to minor imperfections in the substrate. Slabs are flexible and knit together eliminating air gaps for maximum acoustic and thermal performance, making it perfect for use on the curved walls of the funnel shaped control tower. The same level of acoustic performance could not have been achieved with rigid foam boards, which have closed cell structures that offer virtually no sound absorption. Rigid foam boards are also more prone to air gaps, reducing acoustic performance further.As well as excellent acoustic and thermal performance, Rocksilk® RainScreen Slab is non-combustible with Euroclass A1 reaction to fire classification. This means it will not contribute to the spread or development of fire should it occur.Another factor in the specification of Rocksilk® RainScreen Slab was sustainability. It is manufactured with ECOSE® Technology, Knauf Insulation’s unique bio-based binder, which contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable, and is 70% less energy-intensive to manufacture than traditional binder, so it is more environmentally friendly. Products made with ECOSE® Technology generate low levels of dust and VOCs, and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.Thanks to Rocksilk® RainScreen Slab the air traffic controllers at Birmingham Airport can enjoy a quieter, warmer, safer and more sustainable workplace."Acoustic protection, energy performance, fire safety and sustainability were all crucial factors taken into account during the design of the air traffic control tower and so all materials specified with the project needed to meet these multiple requirements. We are extremely pleased with the building."Will Heynes, Birmingham Airport’s Development Director

A new residential development project is currently in progress in Kentish Town, Camden, featuring a multitude of contemporary flats equipped with state-of-the-art amenities. The construction includes Klasse C-board as the external sheathing board used throughout.

Ark Oval Primary Academy were in the process of having multiple works completed at their academy in Croydon, London which included a new build, re-surfacing the entire playground and various outside equipment including a new canopy.

The shelters were well-received at Rotherham General Hospital; staff now have an undercover space where they can take a breather or enjoy using the outdoor gym equipment, throughout the year. This will be greatly beneficial to their mental and physical health.

Taralay Impression Comfort and Tarasafe Geo gave Mosswood Care Home a breath of fresh air in this new-build care home.

High-performance products from the A. Proctor Group, experts at solving condensation, airtightness and energy efficiency problems in buildings have been selected for use in the construction of a British Antarctic Survey building.The BAS Signy Cummins Hut is designed to provide a fully fabricated, fit for purpose hut, which can be easily erected to provide short-term accommodation for two British Antarctic Survey operatives to carry out incredibly valuable research in extreme polar conditions.Main Contractor, Mike Robinson of Rothwell Robinson, Manchester explained. “Due to the extreme conditions, we wanted to ensure that only the highest performing products were used on the project. In light of the extreme temperatures involved, we approached the A. Proctor Group who carried out a full condensation risk analysis.“Following the risk analysis, the recommendations adopted included Roofshield® for the roof and Procheck® 500 as a VCL for the walls.”“Another key factor was that the chosen components needed to be lightweight to be carried from the shore to their final location on the island.”Roofshield is an air and vapour permeable, highly water-resistant roofing underlay that has been made to the same high specification for over 20 years. The products reliable performance has been demonstrated in the toughest locations around the world. Its characteristics allow even very complex pitched roofs to breathe, without the need for air gaps or secondary venting.Many vapour and air permeable underlays use an airtight VP film layer to achieve their performance, whilst Roofshield’s patented SMS (Spunbond Meltblown Spunbond) structure allows high levels of airflow, in addition to the transport of moisture vapour, making the formation of condensation in the roof space virtually impossible. It has an extremely high degree of vapour permeability, as well as air permeability, so will still perform in conditions in which air tight alternatives will not.Procheck 500 is a strong reinforced polyethylene vapour control layer, for use within roof and wall constructions to prevent warm, moist air escaping from inside the building and condensing within the insulation. The woven extruded polypropylene multifilament scrim reinforcement provides exceptional tear resistance and robustness to withstand the toughest conditions.

Features an early design of the FloSet Compact with Strainer. FlowCon Green PICVs for Fan Coil Units, Heat Exchangers and Air Handling Units.