"air conditioning systems"

Extension and renovation of an existing building in front of Lake Como, Italy.The building is able to manage on its own: once the construction is finished, thanks to the geothermal, solar thermal, photovoltaic, controlled ventilation and air conditioning systems, coordinated through home automation management, the building can be considered to all effects as energetically independent.

OverviewPowrmatic supplied a TEG41 air rotation heater for a large distribution warehouse facility in Bristol which was installed by our trusted partners at RSY Air Conditioning.Project BackgroundSupplying the motor trade for over 50 years, Apec Braking is firmly established as the leading specialist braking supplier to motor factors throughout the UK and Ireland. The 10,488 m² distribution warehouse required frost protection with design parameters of -5°c external and +10°c internal.SolutionJust one TEG41 air rotation heater was installed by our trusted partners RSY Air Conditioning. This TEG41 heater was designed to deliver an impressive 420kW of heat output. The TEG41 heater uses high volume, low velocity, air-circulation to distribute conditioned air to large open space and is the perfect solution for any distribution warehouse heating requirements. Due to the customers requirement to maximise the amount of racking within the warehouse area the distance of the unit from racking was much less than would be usually recommend (it was under 2mtrs from face of heater to face of full height racking).ResultThe newly styled Powrmatic Air rotation units in our new RAL 7015 colour were installed by RSY Air Conditioning. The unit was redesigned at the top of the unit to be top exit rather than the conventional design. The theory behind this was to direct the leaving air towards the roof and use the internal profile of the roof to aid with stratifying the air across the building length. The racked distribution warehouse will now benefit from a frost protection system which will protect the internal sprinkler system from freezing in the colder months.

This multi-million-pound training facility at CPFC’s new-look academy includes a full-size indoor 3G training pitch.A state-of-the-art indoor training facility that will allow the football players to train in all weather conditions. GDL were approached to help with the ventilation requirements for the space. Six large rectangular recessed louvres were manufactured and installed to meet the demands of extracting the air from the indoor space generated by eight large fans each with a duty of 12900 m³/hr. 

Project detailsDerby City Council’s new Innovation Centre is at the heart of Infinity Park, Derby’s new 250-acre commercial and technology park.Designed to embrace the characteristics of transport engineering, the centre will play a vital role in supporting companies in the aerospace, automotive and transport industries by helping existing companies to grow and new ones to develop. Project overviewThe Innovation Centre demonstrates its environmental credentials through a number of sustainable features to reduce the carbon footprint. These include GDL natural ventilation products to help provide efficient heating and cooling.GDL worked in conjunction with Derry Ltd to provide and install Intelivent Wall Units and Penthouse Turrets.Designed to meet the ventilation demand of the occupied spaces, our in-house design team assisted making the correct system choices. Our Intelivent products are particularly effective in offices, seminar rooms & workshops where occupancy levels vary throughout the day and a controlled ventilation rate is required.Benefits of using GDL Products on the projectThe Wall Units allow a controlled environment by allowing natural fresh air to enter the building via external weather louvres. The heating coil within the unit is used as a front line heating source during winter.Our Intelivent Turrets offer a balanced supply of fresh air whilst removing warm stale air, an ideal product to ventilate the workshops effectively and efficiently.Intelivent Transfer Fans have been installed to ductwork to assist with the supply and extract of air within the offices and seminar rooms.

For almost a decade, ESCREO whiteboard paints have been helping companies transform their workplaces, making them more creative, organised and open to collaboration. Creativity and innovation are embedded in the DNA of the company and its team from the very beginning. Thanks to this, they manage to find a solution to a problem that negatively affects our productivity and well-being, namely poor air quality. This is how ESCREO Clean Air was born - the latest addition to ESCREO's carbon neutral portfolio of functional paints. ESCREO Clean Air is an interior air purifying paint, which reduces air pollution by more than 90.1%. One of the magic components is an enhanced mineral which attracts and neutralises harmful pollutants, incl. VOCs, odours, air chemicals and CO2. The non-toxic environmentally friendly water-based formula is a great collaboration between modern technology and a clever "problem-solving" approach, through which ESCREO can help commercial building owners use hitherto passive areas such as walls to further purify the air indoors, making the premises more attractive to current and future users.

The Ascent stair unit - Industrial stair system was specified to create a safe means of access over roof mounted mechanical and electrical plant and equipment. The roof area is tightly packed with Air conditioning plant creating a unique challenge to design a safe means of access across it. The Ascent step over / stair unit is able to accommodate spans up to 4.5m and was able to be utilised to create a safe access route. The step over unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.

Heavy rainfall on the Orkney Islands meant that the basement room of Kirkwall Air Traffic Control Tower suffered from frequent flooding, with water levels reaching 1.2m at their highest point. Newton Waterproofing and Specialist Contractor Wise Basement Systems were called in to remove the existing water and then waterproof the structure to protect it from future flooding, all in just one week.Kirkwall airport is located on the main island of the Orkneys, 10-miles off the North coast of Scotland. Presented with a logistically challenging location and a tight project timescale of just 1 week, Newton had no hesitation in recommending the expertise of Wise Basement Systems as the specialist contractor to Building Surveyor Pick Everard.Getting involved at the very start of the project, Wise were immediately able to design, advise on and install a system to remedy the 2 inches of water in the existing basement of the Air Traffic Control tower.Cavity Drain Waterproofing, or ‘Type C’ waterproofing as it is defined by BS 8102:2009 is often the most effective means of achieving a completely dry ‘Grade 3’ environment in an existing structure below ground. It was therefore no surprise that Wise Basement Systems designed a Newton CDM System for this existing basement area.To begin, Wise installed 120m2 of Newton 508 on the walls and 80m2 of the recycled Newton 520 eco to the floor, above the closed-cell Fibran XPS 500-C insulation. The drainage membranes were supplemented with a perimeter channel of Newton Basedrain, directed to a Titan-Pro sump chamber containing two NP400 Pumps to remove the water.Finally, to ensure that the system will continue to work in all eventualities, even in a complete power outage, Wise installed a backup system with dual Northstar batteries and a Victron Power Inverter.Even with a project located 10 miles from the mainland, and 1 week to waterproof a basement with only a 600mm wide access hatch, Wise Basement Systems delivered a completely dry space for the client that was also compliant with BS 8102:2009 and backed by their guarantee.

The goal for this residential dwelling in Salcombe was to create a completely unique space, nestled into the cliff-side to provide a feeling of comfort and seclusion, while maximising the views over the estuary. To achieve this, ten Reynaers aluminium lift-and-slide doors, alongside aluminium windows and single-entrance doors were installed. The aluminium frames provide the strength and stability required for large expanses of glazing, while delivering required pascal ratings to resolutely stand up to enduring winds and harsh coastal conditions. Pre-anodized paint adds further durability to protect the property from the elements.

Project detailsIconic London restaurant The Ivy has undergone a major renovation project that has taken five months to complete. This dramatic refurbishment was completed in time to celebrate the 100th anniversary of the restaurant. Although dramatic, much of its original identity such as the trademark stained glass windows remains.The interior design team behind ‘The Ivy’ has previously worked on other restaurants in the same group including Scott’s, the J Sheekey Oyster Bar and Daphne’s in South Kensington.The restaurant has had a modern makeover, the bar has been relocated to the middle of the room and is surrounded by pink leather and mohair bar stools, in the main restaurant booths as well as private corner tables have replaced the original seating arrangement. Project overviewWorking alongside our clients we manufactured and supplied the internal ventilation grilles and diffusers throughout the restaurant including linear bar grilles, floor grilles, linear slot diffusers and air valves.Our products provided both supply and extract ventilation with accessories and optional paint finishes to suit our clients’ exact requirements. We manufactured all our products in the UK at two locations in Glossop and Sheffield giving us complete control over the quality of our production process and lead times. Benefits of using GDL Products on the projectWe offer a full turnkey package including design, manufacture and install.We manufacture standard and bespoke products to suit your exact requirements.

Majunga Tower is a reinvention of an office block. The facades are articulated thanks to 3 bands, over 39 storeys reaching 195 meters high. This singular building has a double-skin envelop. It is made out of glass and aluminum, to allow natural light into the offices while keeping the views and a visual connection to its context. Our motorized BSO with C50 blades are integrated into this facade for complete adaptability of light and shades throughout the day. This efficient system cut lighting and air-conditioning energy consumption.

Wiltshire Air Ambulance’s custom-built facility brings together the operational and charity teams together under one roof for the first time, which will not only improve the vital service they offer but ensure the stability of their future. As a charity Wiltshire Air Ambulance have a set of core values which they abide by, one of which is the planet; They are a responsible charity and make a difference by using local companies and where possible sourcing recycled and sustainable materials. They looked to danfloor to supply their Eco Weave Tile for the development.

Facade systems from Technal helped the University of Leeds to set a new benchmark for student accommodation in the city. More than 3,00sqm of Technal glazing systems for the Charles Morris Halls were fabricated and installed, and the £21m student halls of residence comprises of two half-hexagon buildings sited around a central landscaped courtyard, providing 457 hotel-style study bedrooms.The challenging glazing specification involved the construction of large oriel glazing bays that project 300mm in front of the cladding, and contrasting projecting bays to the corners of the two buildings. The oriel bays provide a different architectural feature and an alternative to more conventional recessed panels of glazing. The floor to ceiling glazed units, which maximise natural light were constructed using aluminium curtain walling inset with top-hung casement windows. These were fabricated and installed into the bays in more than 30 different sizes to create a less regimented appearance for the building envelope. Laminated glass with coloured interlayers adds further interest to each facade - in panels of green where the glazing is set into red brickwork on the external elevations and orange for the courtyard elevations to complement the cream-coloured brick cladding. Long runs of curtain walling using 1500mm modules enclose the common room and the link bridge between the two accommodation blocks. The window units in the common room are linked to the air conditioning system, which allows them to open automatically according to CO2 levels. All other opening units on this scheme are operated by low-level levers to allow anyone, regardless of any disability to open the windows.

Flymesh and cast iron air bricks, up till now, Installers have either pushed the mesh into the back of the air brick from inside - never to be cleaned again - or meshed over the air brick and held it in place with silicon - never to be removed again. Which is why we invented the cast iron flyscreen airbrick with removable copper mesh. It solved a problem faced by Galliford Try, constructing the athletes village for London 2012 Olympics when they needed feature vents for kitchen extraction to enhance their clay bricked homes. Discover how they work...

Royal Winchester HouseComer Homes is renowned for the high quality of its residential and commercial developments, which span London, Hertfordshire, Dorset and throughout the South East. Its latest project is Royal Winchester House, a landmark building of one and two bedroom apartments at the heart of Bracknell's new town centre. As a planning requirement of Bracknell Forest Council, Comer Homes was required to provide a sustainable, low energy form of heating that would offer a reduced carbon footprint, as well as being affordable to run.The SolutionComer Homes specified F730 Exhaust Air Heat Pump systems from NIBE for all 337 apartments on the development to ensure they could meet their renewable targets. The new homes builder employed MKP Consultants Limited to undertake the building services design as they had previous experience of NIBE systems on other apartment developments in the area.The NIBE F730 Exhaust Air Heat Pump system was an ideal solution, as it offers mechanical extract ventilation, alongside heating and hot water in a compact design. The heat pump units were installed in a service cupboard in each apartment, as they have a small footprint of only 0.6m2.NIBE F730 operates by recovering energy from the ventilation air and, if desired, extracted from outdoor air, the heat energy is absorbed by the heat pump using a vapour compression process and subsequently transferred to the water-borne heating system, in this case an underfloor heating system. The integrated 180L domestic hot water cylinder also ensures a plentiful supply for the one- and two-bedroom properties.A sustainable solution, NIBE F730 keeps energy consumption to a minimum. The efficient control system automatically adjusts the indoor climate for maximum comfort for the occupant, using a combination of weather compensated control and the low energy inverter driven compressor.Each apartment is also fitted with a NIBE RMU 40 room controller, to allow greater flexibility of control for users and if required can be easily connected to NIBE’s internet remotely monitoring and control platform UPLINK™.Thanks to this innovative heat pump system, residents at Royal Winchester House are set to benefit from lower energy bills and a reduced carbon footprint.The ResultsThe NIBE F730 system complies with Parts L, F and G of the building regulations, and helps to meet planning requirements designed to reduce energy consumption and carbon footprints within residential housing developments. External noise is kept to a minimum and building aesthetics are unaffected by the need for external plant.TestimonialHead of Projects at Comer Homes, Jack O’Brien explains: “We were looking for a heating and ventilation system that would be both sustainable and affordable to run. We have been impressed with the performance of NIBE’s heat pumps, with their high efficiency, low noise and low running costs further enhancing the sustainability of the whole development.”About Royal Winchester HouseRoyal Winchester House is a landmark building of high specification 1 and 2 bedroom apartments available to rent. The unique design and architecture of Royal Winchester House creates a striking and impressive presence from the ground floor retail spaces up to the luxury penthouse levels.Royal Winchester House has been built for the private rental market and the development is being managed by Chancellors estate agency. The apartments benefit from high standards of insulation and air tightness. In addition to the NIBE heat pumps, the whole development has been fitted with a biodigester for the repurposing of food waste, as part of reducing waste sent to landfill and to add to its sustainability.

On the roof at the famous Queen Elizabeth Hospital in Woolwich, London; is a very considerable amount of equipment for services such as air-conditioning, electricity, and gas. Specialist contractor Mid Kent Roofing were approached and asked by Vinci Facilities to provide a walkway solution to this need, and the DukMat walkway system was the only option. Supplying more than two kilometres of the walkway system, Fixfast worked closely with Mid Kent Roofing to provide the solution - easy to install and neatly packaged, the DukMat system is second to none."Deliveries were perfect and times adhered to which stopped any traffic flow problems with emergency services also using the same access points as the deliveries"Stave Cayford - Mid Kent Roofing

Salthaven Apartments, Tower Road, Poole, DorsetThe Salthaven apartments in Dorset aimed to deliver luxury living for occupants. Bayview Developments not only constructed beautiful homes for them, but also opted for highly energy efficient heating within the new development.Each of the 12 two or three bed apartments have been fitted with their own individual exhaust air heat pump (EAHP). This technology has been installed in buildings across continental Europe for many years but is now being used more commonly within the UK. Bayview Developments were looking to exceed their planning requirements by reducing carbon emissions and providing cost savings for occupants. NIBE’s innovative EAHPs were therefore the ideal solution.The solution to the projectA NIBE F730 EAHP system removed the need for gas boilers, something Bayview were keen to do given the UK’s net zero targets and commitment to phase out the technology. As heat pump technology is powered by electricity, no gas has been installed at the site.The NIBE F730 unit can be found in the utility room cupboard of each apartment and is comprised of a ventilation system, a hot water cylinder and a heat pump – a complete ‘all-in-one’ product. It works by drawing warm air from the kitchen and bathroom to feed the heat pump, which extracts the heat energy. The recovered energy from the ventilation system is used to drive the heat pump process, which heats the underfloor heating and provides water for the integrated 180litre hot water cylinder. The stale air from the ventilation system is then released outside, whilst fresh air from outdoors is introduced via wall inlets with cleanable filters. The efficient system minimises energy consumption by combing ventilation heat recovery with heat pump technology, that is perfect for well insulated new build properties such as these.The ResultsThe EAHP systems meet the average annual heat demand of 6019 kWh for each individual flat whilst also providing instant hot water. Occupants are able to schedule their heating to suit their timetable and energy tariffs, and therefore benefit from lower energy bills. The system performance factor (SPF) measures 3.33 – this means the system is very efficient as every kW of electricity used to run the unit produces approximately 3 kW of heat energy.NIBE utilised connected electricity meters in 3 apartments to remotely monitor the systems performance across a 12-month period. NIBE was thus able to see how the systems met energy demand consistently for residents, keeping them comfortable and warm throughout the year.Energy consumption data shown in Figure 1 visualises electricity consumption data from the monitored apartments throughout the year. This data also covers the provision of all heat pump controls and continuous mechanical ventilation.Figure 1: 2022 Energy Consumption data for monitored apartments.The all-in-one system has shown a noticeable reduction in energy bills for each apartment too, with all 3 monitored apartments experiencing both monthly and cumulative cost reductions in their energy bills as shown in Figures 2 and 3. This comes with the additional peace of mind that consumers will be kept cool in the summer months with ventilation with no increase in costs.Figure 2 and 3: Monthly and Cumulative Heating Bills for Apartment 11 with the NIBE F730 heat pump compared to a natural gas boiler.The occupants of Apartment 11 are saving on average £130 on their annual heating bills with the heat pump system in comparison to a natural gas boiler, even with the additional provision of mechanical ventilation. We expect that these savings will continue to increase as the Government seeks to rebalance green levies to decrease electricity prices.Sunstone Energy Ltd, the installer for this project, told us how easy the control system is to use for this heat pump, allowing for heating and hot water to be available at any time during the day. The building also benefits from insulation, underfloor heating, smart controls, double glazing, hot water cylinders and mechanical ventilation with heat recovery (MVHR).TestimonialVictoria and John are both residents of the Tower Road apartment complex and have been comfortably living with the exhaust air source heat pump system for a year. They added “We are delighted so far with the new heating system, and love that it has been providing us with heating and hot water throughout the year, keeping us warm in the cold winter months. The heat pump works just as well as our older systems and it is great to know that we’re also doing our bit for the environment in the process.”About the installerSunstone Energy Ltd takes responsibility for delivering complete renewable solutions appropriate to their client’s properties. Their expertise includes the installation of ground source and air source heat pumps, underfloor heating, solar panels, biomass boilers and MVHR.  

Although we have cast iron slotted air bricks in metric sizes to perfectly engage with modern plastic ducting and periscopes, there may come a time when the installation requires imperial old patterned cast iron air bricks. Connecting these can be especially difficult which is why we've introduced these aluminium sleeves known as the metimp adapators (short for metric imperial). They are available in two sizes, single air brick size to connect up to a periscope duct and cavity wall sleeve or the double brick size for connecting to a larger wall sleeve

Re-designed by Schmidt Hammer Lassen Architects, Metalskolen conference centre on North Zealand, Denmark, has undergone a complete transformation. The new, contemporary interior features a total of 2,300m2 15mm Oak Classic plank flooring, fitted throughout circulation and breakout areas as well as in all conference rooms. Delivered unfinished, the solid oak flooring was finished on-site using Junckers’ Rustic Oil in White to create a pale floor which reflects a lot of natural light. True to architectural traditions commonly applied in the Nordic countries, SHL has created an inclusive and nurturing space, providing the perfect setting for learning, reflection and relationship building. Not only concerned with light and aesthetics, SHL base their work on democracy, welfare, sustainability and social responsibility, a commitment which results in buildings with a high degree of wellbeing. A light-coloured floor helps enhance lighting levels, reducing the need for artificial light and therefore saves energy. In contrast to a dark surface, which absorbs and holds heat and subsequently releases it back into the room, a pale floor will not contribute to overheating, reducing the need for air conditioning systems. With a perfectly smooth surface, a solid wood floor from Junckers cannot harbour dust or mites. As an all-natural material, wood contributes to an even and balanced indoor climate as it helps maintain temperature in a room and reduces static from any electrical equipment. Junckers’ floors hold the Danish Indoor Climate label and have undergone extensive degassing and odour testing to ensure there are no chemical substances in the flooring. Junckers also complies with EU legislation REACH. 

OverviewIn partnership with Tidyco, Powrmatic was selected to supply an energy-efficient air rotation heating system for a 5,100m2 warehouse storage facility in Derbyshire using a Powrmatic TEx41 Air Rotation Heater measuring over 20ft tall.Project BackgroundTidyco was approached by a customer who is involved with manufacturing, transport and additional services in the aerospace industry amongst others. After recent success, their customer needed to expand their footprint and managed this by moving into a newly built warehouse situated in Derbyshire.SolutionAs this was a brand-new commercial building, there was no heating provision and just the original lighting installed by the builder, which was not fit for purpose. Tidyco was tasked with installing an efficient and effective means of heating solution for the 5,100m2 (55,000 sq ft) vast space along with a modern lighting system. In order to heat and illuminate this space, which occupied a space of more than seven and a half football pitches, some heavy-duty kit was required.ResultFor the heating aspect, Tidyco engineers installed an internal Powrmatic TEx 41 air rotation heater, manufactured in the UK. With an output of 350 kW, the unit measured in at over six metres (20 ft) tall. This particular TEx model was gas-powered and has the superior capacity to provide complete climate control for a 55,000 sq ft with a single TEx Air Rotation Heater.

The Ministry of Defence (MOD) protects the security, independence and interests of the UK at home and abroad, working with its allies and partners whenever possible. The MOD needs to make sure that the armed forces have the training, equipment and support necessary for their work, and that all expenditure is kept within budget. Extensive assets of the MOD need to be maintained in a state of readiness at all times. It’s a round-the-clock task operated on an enormous scale, often in hazardous conditions and in extreme weather. An example of this is the maintenance of aircraft.

Background to the projectSouthway Housing Trust is a South Manchester based housing association managing 6,000 local homes.Southway has pledged to be zero-carbon by 2038 and has identified switching its homes from gas to electric heating as crucial to achieving this target.In 2022, a survey of Southway’s residents found that 88% were keen to reduce their impact on climate change, and Southway’s commitment to reducing carbon is in line with Manchester City Council’s net-zero ambitions.The Arrowfield Low Carbon Living Project represents an early and ambitious retrofit of a south Manchester neighbourhood that will reduce the estate’s carbon footprint by as much as 50%.Southway is replacing 396 of Arrowfield’s inefficient gas boilers in-line with long term government plans to electrify heat and will also improve the fabric of homes to make them more energy efficient.The scale of the project, part funded by the European Regional Development Fund (ERDF), has made it one of the UK’s biggest home retrofit schemes.NIBE products used:NIBE F2040 Air Source Heat PumpKey stats:112 NIBE F2040 Air Source Heat Pumps installedContributes to project to remove 370 tonnes per annum of CO2 in ArrowfieldInstalled by Rothwell Plumbing GroupPart of a project to retrofit 199 homes with air source heat pumpsThe solution to the projectArrowfield Low Carbon Living is a flagship scheme in Manchester, retrofitting 199 homes and 197 apartments with air source heat pumps. NIBE was chosen as one of two heat pump providers to bring low carbon, sustainable heating to residents living in the Arrowfield estate. NIBE’s high quality, reliable heat pump systems provide optimum savings and automatically adapt to each home’s output requirements.Rothwell Plumbing Group (RPS) was chosen as the installation partner for the project, with a proven track record for delivering high quality heat pump systems, in both the public and private sectors. RPS are also MCS & Trustmark accredited, with the experience and technical ability to install NIBE systems to the highest of standards.Southway’s aim is for the project to act as a learning process and blueprint for how it can scale up the retrofitting of its entire housing stock over the next 15 years.Ahead of this ambitious project, a community engagement programme enabled greater awareness of heat pumps as a low carbon heating solution, whilst providing the opportunity to listen and respond to resident feedback.The Arrowfield Hub, located in in a repurposed empty house on the estate, became a venue for regular engagement between the residents and the project team, creating an open forum for questions and comments on the proposed scheme.The Hub was also heated by an air source heat pump, allowing residents to witness a live heat pump in operation and experience the warmth of the building.Residents were also able to express their concerns surrounding the project, and these could be addressed accordingly. This regular and open engagement was key to keeping residents informed and more familiar with their soon-to-be new heating systems.The Hub also allowed for the project team to dispel common myths and misconceptions about air source heat pumps and reassure residents that their homes would remain warm throughout the yearThe Results112 NIBE’s F2040 Air Source Heat Pumps have been providing heat and hot water to residents across the estate, adapting to the requirements of each and every home in the estate, whilst providing powerful output even down to outdoor temperatures as low as -20°C.The systems will provide homes across the estate with optimised energy and cost savings, whilst supplying a supply line temperature of up to 58°C regardless of outdoor temperatures.TestimonialMatt Roberts, Strategic Director of Property and Development at Southway Housing, said:"Community engagement for the Arrowfield Low Carbon Living Project was central to the project's aims. Foregrounding the needs of Arrowfield's residents as central to the project’s implementation, helped us to better convey the benefits of low carbon heating and address concerns and suggestions brought forward by homes set to benefit from the retrofit scheme.Air source heat pumps are essential to Southway Housing Trust decarbonising our housing stock and achieving our net-zero goals. Working in partnership with NIBE is part of that process and has contributed to achieving carbon savings of 370 tonnes CO2 per annum on Arrowfield.”About the installerRothwell Plumbing Services Group Ltd, formed in 1997, are a family run business specialising in delivering renewable solutions across the North of England. The company helped to ensure residents in Arrowfield Estate could access maximum energy savings and reduced energy bills.

Kingspan Light + Air worked on project jewel at Changi International Airport in Singapore. One of the most innovative project features is the distinctive dome-shaped facade, made entirely of glass and steel. Our team worked with the architects and project team to specify and install over 100 Lumera ventilation windows. The Lumera ventilation windows also operate as an integral element of a wider Smoke and Heat Exhaust Vent (SHEV) system.

  ​​​​​​​The FasTop RS69 polyurethane cement system was used for this ongoing Bangladesh food production plant project to deliver a heavy duty hygienic floor. Sherwin-Williams FasTop Multi RS69 product used in this system delivered a thickness of 6 mm overall and 9 mm in selected areas under machines where the floor would be subjected to boiling water. The initial area totalled 3500 sqm, and then further areas were done as the applicator worked through the factory. The project was the first time Quality Floors Bangladesh Ltd. team had taken advantage of the FasTop technology which featured extreme application conditions, including temperatures of 34-36oC, day and night, and also air humidity up to 100%.

Wales Air Ambulance have a new headquarters with a new purpose-built office bringing the charity and the airbase together. Local aluminium fabricators and installers Atcost Windows of Llanelli won the contract to supply and fit all the glazing products throughout the building. Kestrel’s curtain walling was specified to create an impressive frontage to the building and maximise natural light to the common areas and meeting rooms.

BackgroundLocated in Stroud, the Park Parade, Park Road refurb project was part of a large refurbishment planned by Stroud District Council. The shopping area and sheltered accommodation scheme were given a complete revamp with internal and external work being completed.MD Group from Bristol were awarded the contract by Stroud District Council and were appointed as the main contractor. A new external wall insulation system was installed, along with an extensive refurbishment to the communal areas, external balconies and roofing. Our approved installer Elite Rendering Systems were contracted by MD Group to complete the exterior wall insulation.Alongside Elite, we transformed the premises aesthetically creating modern homes and commercial premises. The buildings were given a new lease of life, and together with Elite we delivered safe, stylish and energy efficient buildings that will help to reduce fuel bills for residents and help decarbonise the Council’s housing stock.Our ServiceOur Technical team were available to provide hands-on-guidance throughout the duration of the project. As part of our service commitment, our K Systems Site Technician regularly visited the project to inspect progress, offer support and ensure high levels of construction quality.As the ground floor of Park Parade is used for commercial premises, one challenging aspect of the project was the detailing and installing around complex interfaces such as air conditioning/refrigeration units. We transformed the outside of the properties with a durable, low maintenance solution that is fully compliant with fire regulations and fulfilled the Council’s criteria.The combination of finishes used not only delivered the desired contemporary aesthetic but provided an additional benefit of cost savings for the client. Residents of Park Parade, Park Road will enjoy reduced energy bills and better living conditions thanks to the U-value improvement.Technical Project DetailsFollowing design and site meetings with the K Systems Technical team, K Systems M (Mineral Wool) was specified by Bailey Partnership Architects and Stroud District Council. This system incorporates eco-friendly mineral wool insulation boards. As an A2-s1, d0 firerated solution, it is widely specified to provide thermal and aesthetic improvements to buildings, reducing energy usage and therefore energy costs.K Systems M, utilising non-combustible insulation, ensured the latest building safety regulations were met. Thanks to its exceptional properties, the thermal performance of the walls after installation has been significantly enhanced. A U-value of 0.27 W/m²K was achieved, which will help to reduce the residents fuel bills and reduce the level of condensation forming on the inside walls – two key objectives for the client.For the finish, high-performance Silkolitt+ silicone renders were supplied along with our lightweight synthetic brick slips (VBriQ). This combination improved the aesthetics of the buildings for its residents.Silkolitt+ silicone thin coat renders are available in a wide range of colours offering a contemporary finish. The excellent vapour permeability allows the building to breathe and prevents interstitial condensation. The flexibility of the finish provides resistance against cracking and increases the durability, ensuring a long-lasting finish to the properties. It is very user friendly, and its hydrophobic properties reduce maintenance requirements.Accredited by the BBA, the K Systems VBriQ brick slips provide top tier Cateogory 1 impact performance and are ideal for use on this project. This lightweight system is quick and simple to install and has high UV resistance while also allowing the original brick colour to be maintained. An extremely durable finish that will withstand the day-to-day demands placed Park Parade, Park Road.

When proposing the architectural design, one challenge for Nickel 28 was how best to implement effective lighting into the large warehouse facility. Aiming to limit reliance on electric and artificial lighting in an effort to reduce energy consumption, daylighting solutions became a key consideration. Kingspan Light + Air, understanding the needs of the client, delivered a bespoke solution that satisfied the specific needs of the warehouse facility by helping to maximise on natural lighting. Implementing the Kingspan Day-Lite Kick wall light system horizontally across the loading bays in the warehouse enabled the facility to maximise on natural light without glare.

Care Spaces played a crucial role in enhancing the living conditions of a private client, referred to as Mr B, who had experienced a spinal injury leading to a loss of physical independence. Collaborating with an architect to design a bespoke extension, we focused on the bedroom and bathroom to cater to his specific needs. The centrepiece of the design was an XY ceiling track hoist with a magnetic transition gate system, facilitating safe transfers between the bedroom and bathroom. Care Spaces also recommended bathroom equipment tailored to Mr B's needs, including a washer/dryer toilet, a static-height hand basin, and an Avero care bath with an air spa system for therapeutic benefits. With Mr B's approval, we oversaw the installation of the hoist system and bathroom equipment, provided necessary training, and ensure routine servicing for optimal functionality. Mr B is now delighted with his improved living space, and Care Spaces remains committed to maintaining the excellence of his care equipment.

A clear first BREEAM certified public management structure where the building interior design demanded sharp attention to detail; Technowood was a clear choice. The saving on solid timber was a driving force in the decision process. Certified FSC and A2 FR were also important considerations when compared to sold timber. Happy New Service Building was designed by the Architectural Bureau.The Municipality new service building has been designed with a creative understanding which explores an interior that maximises the room use. Therefore, the space has an uplifting positivity to the vertical design.Project RequirementsThe building planning consent required ‘green building’ credentials. Furthermore, BREEAM-BESPOKE criteria were used in this project and BRE-GLOBAL prepared tailor-made criteria directly to the specific building type.Turkey’s first BREEAM certified building will be public; this project is expected to bring a lot of innovation including environmental sensitivity. Thus, it is foreseen that similar criteria will be applied in the future construction in the development region.Further, the main features of this project are a passive air conditioning system and natural lighting, double wall and gallery, economical water usage, recyclability of the material where possible. The enviro-friendly green roof and environment considerate plant preferences.Technowood satisfied all build requirements, the planning was especially happy with the aesthetics of such a diverse material. Invisibly fixed vertical columns solved the solution of the curved nature of the design; as well as the speed of installation which made the use of this wood finished product even more cost effective.Technowood is environmentally friendly, efficient to fit, FSC, A2 FR. By using Technowood this project has a timber consumption by 98%.Credits and Further informationInterior design     The Architectural BureauLocation                     TurkeyProject                        GOVERNMENT MUNICIPALITY COUNCIL CHAMBERMaterial                     Alu-Click Technowood Beams

Our newest designed cast iron 225x225 air brick allows for an unprecedented free area of 28,000mm2. It is known as the MAX9 air brick and has recently been cast in Oxfordshire, near Cotswolds and is ideally suited to period properties looking for enhanced ventilation. Existing customers include Prime Minister Cameron for installation in Chequers as well as Jesus College Cambridge

The cast iron flyscreen air brick has the advantage of protecting the property from insect and rodent ingress but can help stop flooding with this innovative and simple barrier. The flood screen is a cork gasket for our single and double flyscreen air bricks and is simply inserted in the air brick when flooding is likely or imminent in place of the fly mesh. Once the danger has passed the copper fly mesh is replaced and the cork flood screen stored away safely until require again. It is available with our 9x3 and 9x6 cast iron air bricks here

Air Charter was refurbishing its UK headquarters into a space where its staff could refresh, relax and enjoy some downtime. Milliken's Rootwork LVT with FlexForm Sound™ was chosen for the floor covering to provide a beautiful wood plank aesthetic combined with enhcanced acoustic performance and exceptional slip resistance. The product's loose lay format made for a fast and efficient adhesive-free installation process. This is a Carbon Neutral product.

Howe Green’s 5000 Series and 7500 Series access covers were specified for the Emirates Air Line, the first urban cable car in the UK. The cable car crosses the Thames from Greenwich Peninsula to the Royal Docks and links two former Olympic sites. The access covers were required to provide easy and reliable access to essential services within the North and South Terminal buildings. A bespoke aluminium bar was also designed and made for the project. The bar comprises a decorative trim featuring a semi-circular section with a 10-metre radius and a 6mm visible edge.

The £25 million redevelopment of the hospital includes a new emergency department. Working alongside our clients Willmott Dixon Interiors Ltd, GDL were appointed to manufacture and supply the Acoustic Louvres and the Clip-on Louvre screening as part of the 23 hour assessment and A&E refurbishment. Our acoustic Louvres are designed to attenuate medium and high frequency noise breakouts from ductwork and plant room openings and were selected for the existing plant area along Pond Street. This product can be manufactured to suit any bespoke size requirements and is available in single bank or for higher levels of attenuation, double bank.  Our Louvre screening can be located at basement, ground, mid or roof level and can be fixed in a conventional 45º angle or inverted depending on the privacy requirements of the designers and architects. We can also supply single or double leaf doors providing secure access to the screened areas. 

Project detailsBurnley’s new development of a 73,000 m2 area with a brand-new dedicated training centre, brings first class facilities for the first team, development squad and youth team players under one roof for the first time.Project overview This new indoor all-weather area with a small spectator gallery, to meet the requirements of the Elite Player Performance Plan. GDL were appointed to manufacture and install the natural ventilation turrets.Benefits of using GDL Products on the project ·     GDL Natural Ventilation turrets are manufactured to any size or ventilation requirements ·     Bespoke products manufactured at our Glossop and Sheffield facilities ·     We offer full turnkey packages from design and manufacture to delivery and install.

VIEGA MEGAPRESS – THE IDEAL FIT FOR FESTOOL HQAward-winning international power tools manufacturer, Festool has invested £10 million into its new headquarters based in Bury St. Edmonds. As part of the construction, Viega’s Megapress press connection technology has been utilised for the building’s new state-of-the-art heating system, allowing for an efficient and effective installation.Festool has relocated its 55 office-based employees to the new site in Suffolk Business Park, in Bury St. Edmonds. The large, modern facility includes meeting rooms, cafés and office space with a separate warehouse and demonstration facility. It was important for the company that its new headquarters represented a modern and sustainable design and could be a facility where the company can continue to expand and develop.The headquarters has a complex range of HVAC systems, including a hybrid air conditioning system, underfloor heating and domestic services. Viega’s carbon steel press fitting system, Megapress was an ideal solution to create the pipework connections, offering a fast and effective alternative to traditional methods such as welding.David Aldous, Mechanical Project Manager at Ceetech, the contractor for the project, commented: “We selected Megapress as it ticked all the boxes. It provided a secure press connection without the need for welding and allowed our team to undertake the work efficiently and effectively. This project had to be completed to a tight deadline, so it was essential to make strategic time gains throughout the installation period.“We were also able to make valuable time-savings because with the Megapress system, there is no need to prepare the pipe surface or clean it after as with welding, threading or grooving. From a health and safety perspective – it also removes the element of hot works.”A highly effective pressing method, Megapress connections can be made in just seven seconds – helping to achieve a 60% reduction in installation time. After cutting the pipe to the required length, contractors need only deburr the cut surface, slide the press fitting into place and press the connection.The simplicity of the press fitting process also ensures that a uniform seal is created on each connection throughout the project; particularly important on large-scale developments where there is set to be thousands of joints across a single site. Once the fitting has been pressed, it forms a strong and secure connection.David concluded: “The Megapress system is excellent, I’ll certainly select Viega again for future projects. It was a clean installation and the end-client was pleased with the high quality of work."

An air filtration specialist bags a neat £80K tax benefit for their Research & Development efforts