"guard rail panels"

Opened in 2009, Droylsden Academy in Manchester is a contemporary, open plan teaching environment. The state-of-the-art secondary school serves 1,400 pupils, however since opening it had become apparent that its design and layout had some challenges, in a large part due to the sound pollution associated with the open-plan layout. Contractors Buildmain were briefed to reconfigure a number of areas in order to minimise reverberation and improve the learning environment – and looked to CMS Danskin to identify an appropriate remedial acoustic solution.The ChallengeOne area of the school that needed particular attention was the music room, which was too large to be conducive to effective music practice. Contractors Buildmain were briefed to reconfigure the space into four separate rooms, to provide a soundproof environment for music recital and practice. The new practice rooms were to adjoin an existing classroom and the communal corridor, so controlling reverberation was an integral part of the scheme – the architects had specified the control of sound levels up to 68dB.The SolutionA complete overhaul of the existing music rooms was required – partition walls were removed and a new layout designed to incorporate the four separate practice rooms, an internal corridor and a store room. To achieve the dB rating of 68, Buildmain opted for a combination of acoustic solutions provided by CMS Danskin, including SuperPhon panels in all four rooms.In order to control reverberation in the area, Buildmain constructed the new rooms using a twin-wall method, using 15mm Soundbloc plasterboard with an acoustic matting sandwiched between the layers. The walls were then over-clad using IsoMax Acoustic Insulation Clips. A total of 20 panels were installed by direct fix to the walls of each of the four new music rooms. The 50mm thick panels were supplied in three sizes; 1200x600mm, 1000x500mm and 1000x750mm, and the colour was matched to the school’s existing interior scheme.To offer even higher levels of absorption, CMS Danskin recommended SuperPhon acoustic wall panels to reduce reverberation times and reflected sound. To assist with the correct specification, a CMS Danskin representative visited the site, at short notice, to assess the rooms and subsequently advised on the best options for the SuperPhon panels.The ResultCMS Danskin worked closely with contractors Buildmain in order to meet the very tight time frame of six weeks to install the Superphon wall panels – the project needed to be completed within the school summer holidays, so that the rooms were ready for pupils on their return to school in September 2016.Paul Bryan of Buildmain said: “We had to fit eight weeks’ work into the six-week summer holiday, and CMS Danskin impressed us with their ability to turn around the product so quickly. Not only were they able to deliver to meet our schedule, they were also able to send out an expert to advise on the best options to meet the specification, all within the timeframe.”

Refurbishment of two former WWII barrage balloon hangars in Pucklechurch, South Gloucestershire into striking new industrial facilities has been completed with the help of Tata Steel’s Trisomet® insulated roof and wall panels.

Stainless steel island top with cut-out for hob and deep edge profile (GEC Anderson edge 7). Various worktops, shelves and panels.All in EN 1.4301 grade brushed satin stainless steel.

This SIPS panel building on the Blackpool promenade was specified in Topseal HD on the roof, external and internal walls. Due to the hard wearing properties of GRP, it was the best solution when dealing with all of the elements experienced on the sea front.

A retrofit project transforms an iconic 19th century building into a modern office Read about a refurbishment project that includes a glazing panel rooflight installation as part of sustainable design to improve EPC ratings at The Drill Hall

One Chamberlain Square is part of the £700m Paradise scheme in the heart of Birmingham City. It offers 150,000 sq ft of office space fitted with floor-to-ceiling glazing and 22,000 sq ft of ground floor restaurant and retail space. Sylan Products Supplied:ColourCoat High Gloss Toilet CubiclesFlush frontedFull height cubicleUp to 80% gloss finishAvailable in over 200 colours in the classic RAL rangeHigh Gloss Duct PanellingModern and StylishCreating Uniformity through outMatching panelling to cubicles Solid Surface Countertop Vanity with Cantilever BracketsTimeless designHardwearingCantilever bracketsQuick and easy to installAvailable in 12 Solid Surface colours

Severn Trent Water’s new £60m operations centre in Coventry, which aims to set new industry standards with one of the lowest carbon footprints for any UK office building, incorporates equally eco-friendly Armourcoat polished plaster.Designed by Birmingham-based Webb Gray Architects, and built by BAM Construction, this highly-sophisticated energy efficient building featuring the latest eco-technology. Designed for low-energy and low-carbon consumption, the offices include thermal adaptive cooling, biomass boilers, photovoltaic panels, solar panels and rainwater harvesting; justifiably achieving a BREEAM ‘excellent’ rating.Armourcoat was used within the reception and main atrium space, to create a stunning and original design statement. Totaling nearly four hundred square metres of hand-applied decorative plaster, Webb Gray specified colourfade artwork for feature panels and curved walls using Armourcoat Spatulata. For the 30-metre high atrium panels, artisan plasterers blended over seventy colours of paste to achieve the seamless finish. Known as ‘stucco lustro veneziano’, Spatulata is a superfine stucco paste that is trowel applied in a series of fine layers to create a highly polished decorative surface. In keeping with the eco specification, the product contains 40% pre-consumer recycled marble.The project also included the use of ‘Anti-Crack’ - an innovative substrate preparation system from Armourcoat which ensures fast-track construction and a tough, unrivalled backing for Armourcoat polished plaster wall finishes. This cost effective, skim-coat plaster is designed for application in 3-4mm layers over plasterboard surfaces. Its use eliminates the need for taping, jointing and sealing the plasterboard surface and provides a first class substrate for Armourcoat finishes.

Flagship of the University’s Science Central site...The building is a living laboratory dedicated to the aim of making urban centres more sustainable for future generations.We were contracted to supply & install various major acoustic elements required on this project. From the get go, our client and architect loved Soundis Absorb-R WoodTec range due to their versatility, and the fact we were able to manufacture the products exactly to the project specific specification. One of the Soundis products from the range were the Absorb-R Micro Perforated Timber Panels which were located and installed on the curved rear wall of the auditorium. The timber core panels were faced with Micro Perforated Formica and the client decided upon the colour red which contrasted the other products within the auditorium tremendously. Another major element of our acoustic package were the Absorb-R WoodTec Grooved Timber Panels which were installed within the main classrooms and smaller teaching spaces to provide excellent working spaces for the students by reducing reverberation times and enhancing the quality of Soundis within the areas. The panels in these areas were RAL painted to the colour chosen by the architect to provide the envisaged aesthetic look and feel of the spaces. Finally Soundis Absorb-R WoodTec Timber slats were installed not only on the walls of the corridors and staircases from ground level all the way to the third floor but they were also used as freestanding dividers in large open atrium and circulation spaces throughout the Learning and Teaching Centre. These timber slats were manufactured the exact specification of what the architect wanted to create a modern but sophisticated look within the newly constructed building. All installation carried out by our installation partner UK Acoustics.

St Martin’s Courtyard, originally developed in 2011, has recently been refurbished. This is a mixed-use restaurant and retail destination and the architects, Brimelow McSweeney, wanted a particularly eye-catching new coating for facades and panelling enclosing the courtyard space and its entrances. The objective was a finish that would appear to change in colour and tone as the sun moves across the sky, finally being illuminated from within the panels as dusk falls. The SolutionWorking with the architects, we developed a bespoke textured red/gold powder coating within our Evolution range, a collection that reflects the beauty of natural metals and metal patination. Brimelow McSweeney and the developer visited our plant to see powder coating in action and discuss the shade they were looking to achieve. We made a range of Evolution sample panels and the final choice was a red/gold shade with a highly textured surface, rather like large golden rain drop. It seems to glow, with or without sunlight. We called it ‘Molten Rain’.Around 500 m2 of flat and perforated aluminium façade were coated. Large petal shapes formed by perforations in the aluminium are illuminated by light-boxes at night to create a warm and welcoming atmosphere.This unique shade forms an appealing backdrop for visitors enjoying eating, drinking and shopping within the courtyard space.Benefits of Using PowdertechPowdertech has over 30 years’ experience in professional architectural powder coatingColour, tone and texture are our passion and we have the expertise to develop bespoke finishes.The Evolution range has a 25 year guarantee for gloss, colour and adhesion.Powdertech's rigorous pre-treatment system will help to keep the panelling free from corrosion for up to 40-years.Powdertech’s flexible plant can coat a wide variety of shapes and sizes of architectural metal work and fabrications.

Gypsum Fibreboard partitioning by specialist building panel manufacturer fermacell® was specified for a redeveloped research facility for a quadruplet of reasons at least, its fire and acoustic properties, robustness and weight bearing capabilities to name just a few.

This exciting installation designed by Sheppard Robson incorporated a bespoke Laudescher LINEA (aw 0.85, Absorption Class B, NRC 0.9) slatted panel with the purpose of managing the reflective nature of the walls within this main entrance area.

This wonderful acoustically treated auditorium at the Headington School featuring TOPAKUSTIK Lungern micro perforated and solid panels.Architects: Lyons+Sleeman+Hoare ArchitectsContractors: BeardFor any questions or queries do not hesitate to get in contact.

A duo of 13-storey and 21-storey buildings set alongside the new Abbey Wood Elizabeth Line station and the regeneration of Thamesmead estate.Interpon D2525 Stone Effect applied to cladding cassette panels that encase the envelope.

BEMO Flex mass-customised sub-structure with N65/Tapered standing seam panels in PVDF2 RAL6007 and BEMO Deck profile. BEMO provided full engineering support including 3D surveys to eliminate construction tolerances.

State of the art 18,000 capacity stadium combining 2 complimentary grey GRC effect PPC tones for external rainscreen panels.Finishes: Y4313I Light Grey Natural Concrete and Y4317I Dark Grey Natural Concrete

BackgroundIn response to the Covid-19 pandemic, the Universityinvested heavily in transforming as many spaces as possible into video-enabled environments. The University quickly identified a substantial problem affecting the overall video collaboration experience in these spaces.Both in room and remote participants were avoiding the spaces due to the poor user experience in the spaces.The SolutionTK-Team immediately knew that the issues related to Reverbration Time (RT) post-survey, a detailed proposal was presented. The University promptly decided that they were happy with the proposed plan and agreed to proceed with installation.Optimised Room Performance with TK-TeamAcoustic PanelsEach panel has been customised in colour, to closelyreflect the University's crest colours, giving each space apersonalised look and feel throughout.Regardless of the size of the groups, the implementation ofthe new acoustic panels has crucially enhanced each spacefor both University staff and external partners.Consequently, the University has reported a substantialincrease in usage of the facilities by staff members, both onsite and remote due to the significant improvements made.Concentration and communication levels are up, and stress levels are down.The thorough before and after testing conducted by TK-Team enabledthe University to experience a noticeable difference inReverberation Time and noise levels in each meeting space. 

Over 5,000m² of BEMO standing seam profile was supplied to the new music school. Finished in an Anomax Anodised light gold, the profile provided non-penetrative support to the BEMO-Bond rainscreen panels at the eaves to provide a smooth finish

DG Timber Solutions, specialist designers and manufacturers of timber frame construction were awarded the contract to build the structure’s wall panels in the factory and install on-site, with the objective of achieving an overall wall U-value of 0.20W/m²K.

Located in Surrey, this detached Victorian property needed its top floor timber windows replaced due to rotting. Maintaining the windows was proving costly for the homeowners but they needed a solution that would still look authentic next to their ground floor timber sash windows. After researching their options, the homeowners came across Roseview’s traditional timber alternative sash windows. The possibility of maintenance-free sash windows that are indistinguishable from the original box sashes, but while providing modern thermal efficiency and enhanced security, made Ultimate Rose the obvious choice. Using modern technology, Ultimate Rose is completely seamless with traditional joinery style mechanical joints and the slimmest 35mm mid rail on the market. When installed adjacent to the homeowner’s original windows it was almost impossible to see a difference. The home was finished with a single vertical astragal bar to match the home’s existing sightlines and allow for maximum natural light. Additionally, run through horns and a wood grain texture was added for a fully authentic finish. The result is truly indistinguishable, and the homeowners now have traditional and modern performing sash windows that will last for years to come. The owners are now planning to replace the timber windows on the ground floor with Ultimate Rose as well.

A multiphase regeneration project consisting of well over 1,200 new homes, community facilities, and a central park with communal facilities and a soft-play area.The regeneration project started back in 2010, phase 2 saw run between January 2011 and April 2013, phase 3 finished at the end of 2017, phase 4 delivered new homes during the 2nd half of 2018, while the latest phases started in 2019 and complete in 2024.Greenside Landscapes were awarded the Hard & Soft Landscaping at Heathside & Lethbridge in Lewisham, for which we supplied our TerraSmart Rail Paving System to support the rectangular concrete pavers in the communal podium space.The system, which is fully non-combustible, it’s made up of super-strong, 100% recyclable aluminium joists, which overlap to create a lattice framework, offering the maximum possible level of support, especially suited to high trafficked areas.The paving system featured a build-up of approximately 300mm and was perfectly integrated into the soft landscaping and soft play areas. Another example of a similar system deployment, in which we worked again with Greenside Landscapes, was the IKEA Hammersmith roof-terrace project.

Oval Village in Lambeth is a project that comprises affordable residential apartments, with office and commercial space, retail and leisure facilities, and parking.The site is part of a large-scale redevelopment of the former Oval Gasworks site, offering 598 apartments with balconies and terraces for which we designed and developed the paving support system.The balconies used the TerraSmart Pedestal Paving System, which is straightforward to install, powerful and fully non-combustible, with the paving laid safely on our RP-FR, millimetre-perfect adjustable paving support pedestals, with edge spring clips around the edges to ensure uniform spacing for an aesthetically perfect finish.The terraces, with a commanding view of the city at the top of the building, feature a hybrid system starting with the TerraSmart Rail Paving System – super-strong thanks to its overlapping lattice framework – to form the ramps, which transition seamlessly into the TerraSmart Pedestal Paving System for the rest of the area.Throughout the project, we worked closely with Formation Architects, HTA Architects, Building Control, NHBC and Berkeley Group to design the most relevant systems for the project. Fenland Flat Roofing installed the systems for the balconies, while those for the terraces were installed by NAO Landscapes.

As part of cultural regeneration of the Olympia Exhibition Venue, Olympia Central Hall has been demolished and the iconic structures of Olympia National and Olympia Grand, both Grade II listed buildings, are being incorporated into the site’s overall redevelopment. The West Hall Exhibition Space is being structurally strengthened to allow for a two-story music venue to be constructed above the existing exhibition hall.It is necessary to isolate the Central building, originally known as Empire Hall, from the West Hall performance space to prevent music and entertainment noise disturbance.Three massive bearing assemblies comprising solid thick steel plates holding Stravibase VHS bearings, which were pre-compressed using our patented frozen bearing technology.A small mock-up (approx. 1/3 of the size) was also constructed, and fire tested at Liege University, comfortably achieving a two-hour fire rating.Music and entertainment noise breakout from this new venue causing disturbance to residents.A custom designed Stravifloor Deck solution with rubber bearings isolating the concrete roof flab from the structure below. This complex floating roof is laid to multiple falls by using supporting rails that are tapered to suit.

Equinox is a large USA gymnasium operator and their first venture in London is in High Street Kensington. The site they chose is on the 5th floor, directly above Sony Music where Simon Cowell works, and directly beneath Kensington Roof Gardens, which is a popular and very trendy night spot.Ramboll Acoustics specified that a floating floor was required to reduce impact noise levels from the gym to <55dB L’nT,w. However it soon became clear that the floating floor would have to ensure that no significant disturbance was caused to Sony Music directly beneath.Our local branch worked closely with the contractor and consultants to fine-tune the floating floor system and built several mock-ups to verify the performance.The final design consisted of a Stravifloor Channel isolation rail supporting a composite dry floor construction. The floor under Group Fitness, where all of the gym classes are held, also had layers of steel plate to optimise the low frequency performance.The on-site performance at the end of the job was measured as 35dB L’nT,w although this was dominated by background noise as the performance of the floating floor was so good. The improvement from the base concrete floor was 42dB.

A major urban regeneration programme to revive a neglected area within the town centre, creating a vibrant community of shops, workplaces, and open spaces.Striking a balance between modern facilities and historic features was at the heart of the design brief, particularly referencing the industrial heritage. In former times this town played a major role in establishing the UK shoe industry Street furniture is throughout the re-development for which the architect decided to use premium powder-coated galvanized steel, delivering both visual appeal and high levels of resistance required within a heavy footfall outdoor environment. Rust-effect powder coat finish, ‘Sahara’ evokes the town’s manufacturing heritage that captures the look of weathered steel without the concern of staining the surrounding paving. Providing excellent weather resistance, colour stability and durability, Sahara was applied to metal planters, seating, bollards, railings and art installations. This achieves visual appeal and a fresh and bold aesthetic. The use of proven powder coating combined with galvanizing technology established in the architectural industry ensures that the street furniture will remain structurally sound and smart for many years to come. The project has achieved a key objective in attracting increased footfall in the commercial ‘sole’ of this once down-at-heel area.

Proteus Façades sets pulses racing at world class university training hospital. A facility that trains healthcare professionals of the future has become the latest project to benefit from cladding panels from Proteus Facades.The new £15m ‘mock hospital’ at Nottingham Trent University’s Clifton Campus will help train healthcare professionals in a realistic hospital setting, including hospital wards, consultation and counselling rooms, and even lifelike patient manikins to give students the experience of working with a variety of injuries.Pick Everard architects specified Proteus HR 1.0m Coil Pre Anodised Aluminium for the entire external element of the new Heath and Allied Professions Centre. The cladding panels were supplied in a mix of Bronze B40 Satin and Bronze B40 Brushed finishes.

Innovative use of Corten steel rainscreen cladding panels and architectural fins from Proteus Facades has helped to create a powerful aesthetic on Sheffield Hallam University’s new state-of-the-art energy facility.Innovative use of Corten steel rainscreen cladding panels and architectural fins from Proteus Facades has helped to create a powerful aesthetic on the University of Sheffield’s new state-of-the-art energy facility.The new Energy Centre Transformer Building, created by HLM Architects and built by main contractor Vital Energi, forms a key part of the University’s long-term masterplan.It works as an onsite energy centre that provides a resilient and uninterrupted supply of both heat and power to all buildings within the University of Sheffield’s Western Bank Campus.

The Oak Cancer Centre – Royal Marsden NHS Foundation Trust, London is a £50m new world-renowned, state-of-art cancer facility introduced in 2023 to help accelerate the development of new treatments offering hope for cancer patients worldwide.Contractor - Doug PhillipsAspex supplied - Technical doorsets decorated with Formica laminates, namely Nevada Oak – a nature inspired woodgrain laminate. The laminated door leaf’s were coupled with primed frames. The lipping and vision panel beads were stained to match Formica Group’s Nevada Oak laminate to achieve a well-coordinated, carefully designed interior space.Novista concealed doorsets with white laminationPVC Encapsulated lead-lined X-ray doorsets with specialist Vistamatic vision panelsCombination NFR, FD30, FD60 and FD120 doorsets

In partnership with Axis Architecture, we supported the creation of a new space for a financial services firm in Grosvenor House in Solihull.Designers, Axis Architecture/ Installation Contractors,John Atkinson Interiors Axis Architecture designed this clever break out area which used the Freestyle as bespoke cut baffles in on the ceiling and The 3D Wave and Tetris in the meeting rooms.The brief was to create a brand new high specification dining and refreshment area sitting within the buildings canteen area in order to create the right ambience, vibrancy and atmosphere Soundtect were chosen for their innovative acoustic paneling. Soundtect acoustic panels were chosen effectively control sound break out as well as add vibrancy to the space by co-ordinating with the rest of the fit out and client branding.

Hush Acoustics provided an acoustic treatment for the floors within the visitor centre of the first sake brewery in the UK, Dojima Sake Brewery. The client was concerned the excessive impact noise from busy areas would transmit through the floors and affect other spaces. The solution was to develop a floating floor design involving Hush Panel 28.Hush Panel 28 was specified for use within the visitor centre to provide an acoustic overlay floor treatment for the café area, which is above the main visitor centre, to help control impact noise from the busy environment.The specification was developed in conjunction with Alinda Barua from SCABAL Architects (Studio Cullinan and Buck Architects Ltd), which represented an excellent collaboration to arrive at the required acoustic improvements.

This high-profile London office needed a stunning re-design and high-quality finish to reflect the client’s values and surroundings. Vtec was specified to provide visually stunning acoustic ceilings. The contemporary design encompassed a modern reception area leading to a large open office floor with a staircase to breakout spaces and an attractive roof terrace. Finished to an extremely high standard throughout, the design featured Vtec MaxiBeam ceilings in white Supalami and Supacoustic panels in Oak Supalami. In the kitchen area, Supacoustic panels were specified in an oak Supalami finish and circular perforated design (SP4 with 10mm perforations) echos the circular supporting pillars and helps soften the acoustics.Explore how we ensure pinpoint accuracy in the design and production to ensure seamless integration.

Project: The Hamptons, GillinghamDate: April 2020 to February 2021 Background:·        The building was identified as having combustible cladding and was required to be re-clad with an A1 non-combustible system·        APL acted as the principal designer of the replacement cladding system, material supplier and fabricator, including all sub-grid, Slimwall™ Weatherboard & aluminium panels and fixings/accessories Systems:·        2,500m² of APL Slimwall™ CPS/SSF external rainscreen panels, including curved areas, with a 3-layer PvF2 coating in a bespoke colour to match the previous cladding·        500m² of APL Slimwall™ Weatherboard to replace combustible timber cladding·        Curved cappings with Class 2 PPC coating·        APL AluE Tritherm™ aluminium sub-framing, extrusions and fixings Building Location:·        Gillingham, ME

Project: GTIMC, University of SheffieldDate: 2022 Background:·        APL were engaged with the architect to provide a solution using APL StrongBak™, having worked with APL on numerous projects before·        APL’s ability to powder-coat its roll-formed profiles provided the client with a large range of anodised-look finishes ·        APL provided all structural, thermal and acoustic calculations Systems:·        2,400m² of APL StrongBak™ long-span structural wall panel system with external profiles being sinusoidal AP18HR and AP45HR with an anodised-look PPC finish·        150² of APL perforated Slimwall™ flat panels with an anodised-look PPC finish·        APL Tritherm™ GALV sub-framing ·        All flashings, fixings and accessories  Building Location:·        Sheffield

The Natural History Museum is protected by a network of cutting edge MxPro 5 fire panels from Advanced.Established in 1881 and renowned for its collections of life and earth specimens, London’s Natural History Museum is widely recognised as the pre-eminent centre for natural history and related research. The Museum is the third most popular in the United Kingdom and its irreplaceable 80 million strong collection is of global importance and includes numerous specimens collected by Charles Darwin.At the heart of the active fire protection for the Museum is a network of 24 MxPro 5, intelligent, multiprotocol panels, plus remote control terminals, BMS interface and a bespoke PC based graphical user interface. The network was designed, configured and commissioned by Pacific Security Systems, a long-time partner of Advanced.

The site was in a challenging position, the location was confined with additional restricted access, the client also insisted on building with “natural and healthy materials”. Our AIRTIGHT structural panel with exceptional airtightness, effortlessly met the brief, even within a very tight budget.

The buildability and speed of installation was one of the reasons we chose this composite panel system from Tata Steel. Using the Trisomet system also meant we could select the optimum insulation thickness for enabling control of the internal climate of the building.

These meeting spaces at the KPMG site in Edinburgh called for our advanced acoustic knowledge and for Topakustik’s design oriented manufacturing. Using the Topakustik micro perforated technology, we were able to create the image of the founders of KPMG into timber acoustic panels.