"water"

Winner of 2021 Pitched Roof Awards for' best use of a green roof', this Optigrun green roof system showcases a steep 47° roof on a residential property.This private residence was originally designed by the owner with a roof slope of 52.5°. Optigrun provided detailed technical assistance to find a green roof solution that would work on such a steep pitch, with the design being adjusted to a pitch of 47°. The solution incorporated a structured storage fleece SSV800 between waterproofing layer and substrate to store water and provide drainage and Type N anti-slip system comprising base netting and sills. The SSV800 layer was laid across the entire roof followed by the Type N netting. Because the length of slope was the same on both sides of the roof the net was laid from eaves to eaves without needing to be fixed. The anti-slip sills were then clipped to the netting in a staggered pattern. The anti-slip system was then covered with extensive substrate and a pre-cultivated sedum vegetation mat. An Optigrun TSK channel system was laid at the base of both roof slopes to accept and direct excess water to the roof outlets. At the outlets, the channel was connected to an Optigrun inspection chamber.  CHALLENGES -     Steep pitched sedum roof requirement and the need to prevent slippage of the substrate and vegetation mat.-     Dealing with drainage run off at the base of the slope.-     The North Norfolk sea front location and weather conditions such as wind uplift  

FOAMGLAS® READY BOARD T4+Architects: Pollard Thomas Edwards ArchitectsConstruction: 2010 - 2012Application: Façade: FOAMGLAS® Slab W+F, 150 mm thick, adhesive fixed;Metal Pitched Roof: FOAMGLAS® READY BOARD T4+, 200 mm thick, adhesive fixedCladding: KME, Tecu BronzeFor the renovation of the façade and the pitched metal roof, FOAMGLAS® was chosen for its resistance to water and for its excellent long-term thermal performance: combined with FOAMGLAS®, the metal roof and façade can last well over 200 years.The grade II listed 120 year old Granary building and the Malthouse are among the oldest buildings within the East London district of Barking and Dagenham. In 2009 the redevelopment master plan was prepared by Schmidt Hammer Lassen Architects. Design for the Granary and Malthouse was carried out by Pollard Thomas Edwards Architects whom certainly achieved the client’s key requirements for sustainability, and energy efficiency.Steve Drury, Rooff development director commented: "At an early stage FOAMGLAS® was specified for its environmental qualities and long term reliability. It is impervious to water and water-vapour and it actually provided an element of exterior weatherproofing as the building works progressed: the interior works could commence whist the metal façade was still being installed. FOAMGLAS® insulation, with its unique cladding fixing system, kept thermal bridging to a minimum; the resulting U-value performance exceeds Building Regulations by more than 25%.With time, the KME Tecu Bronze exterior will take on a natural patina. The metal exterior has a potential lifetime of well over 200 years, hence it’s very important to use the right insulation with a proven long term thermal performance.With FOAMGLAS® thermal ageing does not take place. It is the ideal insulation to be combined with roof and façade materials such as KME Tecu Bronze.For the pitched roof FOAMGLAS® READY BOARD T4+ was bonded and sealed to the timber board structure with PC®11 adhesive. Metal Plates type PC® SP 150/150 were inserted into the FOAMGLAS® READY BOARD. A 180 g/ m2 sanded bitumen membrane was torch applied onto the surface.

We’re always pleased to hear about how our products have helped customers with their renovation projects. However, we were particularly delighted when one of our Partners Roger, of R and A Pressure Washing Services, sent us these photographs of a poolside deck renovation he recently completed.The customer had previously treated their poolside deck with a decking oil, purchased on the high street. As you can see from the photo, the decking looked dull and tired and was not at all complementing the lovely rooftop views from the pool.We’ve had many customers tell us that the high street decking oils they had previously bought had failed. They were continuously having to sand and re-oil their decking to keep it looking smart. By investing in a good quality product, you could reduce both the time and money it takes you to constantly strip and re-oil your decking and replacing it with easy, low maintenance decking.Aquadecks, for example, is water-based and is easy to apply and maintain, with no sanding or stripping required. Sometimes, it’s worth investing in a more expensive product, such as Aquadecks, at the beginning, to save you money in the future.So, how did Roger rescue his customer’s poolside deck?Firstly, he mechanically sanded the deckingTo remove all the old oil from the surface of the decking, Roger sanded the decking with an electric sander. How the decking looked after sanding can be seen in the photo below.Whilst this step is often completed by professionals, for the DIYer it’s going to be easier to remove the old oils using Aquanett wood oil remover (if it’s a different sort of coating you’re removing then use Dilunett or Prepdeck).If you don’t want to sand back your decking, follow the steps below if you’re removing oils.Aquanett can be used to remove teak and other oils from all woods blackened by UV rays. It will prepare your decking for a new coating and improve penetration and adhesion. Its gel-like consistency means that it’s easy to apply.Even better, it’s suitable for environmentally sensitive areas, as it does not contain solvent or paraffin and it’s biodegradable.If you choose to use Aquanett instead of sanding, you’ll then need to neutralise the decking with Net-Trol before applying your finish.Then, he applied AquadecksNo matter how many times we see photos of decking renovations using Aquadecks water-based penetrative wood finish, we’re always really impressed with how it turns out.First of all, Roger applied a liberal amount of Aquadecks. Applying in the direction of the grain, he worked in sections that he could complete within 30 minutes.As soon as the ‘wet look’ of the first application had disappeared, Roger applied a second coat. He then allowed this to penetrate for 15 minutes.He then removed any excess Aquadecks that hadn’t penetrated the decking. This avoids it drying as shiny spots on the surface. The place for Aquadecks is in the wood, not on the surface.As Aquadecks is water-based, Roger was then able to clean his tools with soap and water.We think that the decking now looks as good as new – if not better!

A high-quality installation of pipework for heating and drinking water, absolutely free of contaminants, quick to install and guaranteed to perform over the long term. These were the priorities for the developer of the prestigious West End Gate development in London, leading to the specification of the Profipress system from Viega throughout.The development is a collection of apartments, stunning penthouses, commercial units, and leisure facilities situated in the prestigious neighbourhood of Marylebone and Little Venice. Berkeley St Edwards were taking no risks with water hygiene, looking for a piping system which would guarantee clean water to the different heights of the towers. Given the prestige of the development, the system had to be faultless, future proof and guaranteed to last. Specifying a high-quality solutionKevin Guiry, Senior MEP Manager for Berkeley St Edwards, explained the rationale for specifying the Profipress solution. “Quality was our top priority, both in terms of the water system and the products used. With all the heating and chilled distribution pipework running in a closed system, we needed a solution to guarantee clean and safe water without contamination. The copper Profipress system delivers this alongside real on-site benefits.” Berkeley St Edwards has made a considered effort to move to press connections over soldering methods for pipework. Particularly in domestic projects, the benefit of cold press means contaminants from soldering are reduced and so systems produce a quicker turnaround for test results from flushing. On top of the speed advantages of cold press, the additional benefit of risk reduction through removal of hot works helps increase safety for those installing on site.“Viega was specified in the first phase block, and it was fantastic. As such, we approved the spec for the next phase as per the previous block. The contractor who received the contract used their same core operatives which resulted in a consistent, clean installation.” Kevin summarised.Working with Viega qualityCraig Yardy, Fit-Out Manager at Vital Energi, oversaw the installation of the system and mirrored the sentiment from Kevin. “Three to four years ago we mainly used soldering, but we’ve shifted to press connections systems. With soldering, you get flux and contaminants in the pipe, so you must flush the system. With press, it’s a far cleaner system.”On working with the Viega Profipress system Craig commented: “we had used the copper system on previous projects which were good installations, and it has been the same on-site here. Generally, the high-level fitting has been easy, the challenge has been where pipework in the walls runs into mixers. This means tight spaces for the installer to work the pipes and makes it difficult to press the joints. Viega press tools come with an angled jaw giving us the flexibility to get into those hard-to-reach places.”Providing ongoing support and training One of the benefits of choosing the Viega specification is the on-site training offered for the installation teams. This will ensure that the systems are installed correctly and effectively, using the recommended tools and techniques. Not only does this process maximise speed of installation, it also allows Viega to issue its full warranty.“The support from Viega started with demonstration days at the very beginning of the project. Throughout the first block installation they visited multiple times to check on the installation, offering support and guidance” Kevin noted. “We plan to continue using Viega for the remaining phases of the development. The Viega quality and future guarantees are what made the initial investment worth it in the long run. I’m a big believer in quality and with this system we’re getting the best quality fittings for this premium development. We didn’t want to risk any further maintenance or damage and the Viega Profipress system achieves this.”Due to be completed in 2025, the first four tower blocks have been completed. Ranging from 10 to 30 storeys in height, the development offers unparalleled views of the surrounding area, commanding high-quality finishes to the apartments inside and out.

The Spine, located in the heart of Knowledge Quarter Liverpool – a central hub for higher education and research in the city – includes the new northern home of the Royal College of Physicians (RCP). Designed by renowned architecture and building consultancy practice AHR, the building has been hailed as one of the healthiest workplaces in the world, thanks to the pioneering research in biophilia, health and wellbeing that has been drawn on for its creation. One of the most exciting new developments in the north, The Spine reflects the RCP’s global stance as a leader in healthcare, using the latest innovations in wellbeing-focused design, while being a striking new addition to the Liverpool skyline. The Spine has been designed according to the scientific and medical research principles established in the WELL Standard to achieve WELL Platinum. Through the integration of architecture and interior design The Spine embeds wellness and biophilia into the building environment emphasising strong connections to nature throughout the building, along with the highest standards for provision of fresh air, light and water. The distinctive façade takes influence from the human skin, with the striking Voronoi pattern including 23 million individual polygons applied to the glazing of the building. Inside the building The Spine’s series of double height spaces known as vertical villages supports the provision of light to aid productivity and stimulating the mind. Interior design solutions were selected with occupant wellbeing at the forefront, from natural materials, textures and finishes wherever possible to support biophilic principles and ensure air quality is kept to a high standard throughout the building. Working closely with PPG, AHR specified a range of sustainable paints including JOHNSTONE’S® Trade Air Pure – a bio-based wall and ceiling paint proven to purify indoor air. “When it came to choosing paints for The Spine, we knew we had to find options that were water-based and would have the least possible negative impact on occupants. So we were delighted to find a paint that would actually improve indoor air quality. By using Johnstone’s Trade Air Pure, we’re optimising the air quality within the building and helping to enhance the general wellbeing of occupants, all while limiting the impact on the environment.” Robert Hopkins, AHR regional director Once applied, the revolutionary Air Purifying technology in Johnstone’s Trade Air Pure neutralises up to 70 per cent of formaldehyde from indoor spaces. What’s more, the formula is 45 per cent bio-based and comes in 100 per cent recycled packaging. To complement Air Pure a range of low-VOC water based solutions were used to give the building long term protection including Johnstone’s Trade Aqua Water Based Gloss and Water Based Satin, Covaplus Vinyl Matt, Acrylic Durable Matt and Acrylic Durable Eggshell. The use of biophilic design extends into the colour palette chosen to represent the growth of a tree. Natural earthy colours flow throughout the lower floors, merging into greener, leafier colours and patterns and blues on the upper floors as you travel up the building. The colour palettes work harmoniously with the timber curtain wall and timber floor. The landmark development is not only BREEAM Excellent rated for its sustainable approach; it is also one of the first buildings in the UK designed to the WELL Platinum Building Standard®, certified for mental health and physical wellbeing. “The Spine is one of our most exciting and revolutionary projects to date. We’ve had the opportunity to place unprecedented focus upon what really makes a positive, healthy and happy workplace. Working with the RCP, we’ve achieved a design that sets the bar for the incorporation of biophilia and its possibilities in a modern workplace. With wellness being such a core part of our ambitious design, we needed to make sure that every single element positively contributed to our objectives, and the paints used were no exception.” Robert Hopkins, AHR regional director. Photography credit: Andrew Smith

Here at Symphony, we pride ourselves on leading the way in design and manufacture innovation. We are also always ensuring that sustainability is at the forefront of everything we do. That’s why we were thrilled to work with Barratt Developments to create the first zero carbon home concept from a major housebuilder. The Zed HouseWith carbon neutral homes being such a hot topic, with everything from the move to heat pumps to electric car charging at home, we were honoured to be invited to work with leading housebuilder Barratt Developments on its unique and flagship zero carbon home concept. The Zed House will be the first new home in the UK built by a major housebuilder to go beyond the new Future Homes Standard by delivering a carbon reduction of 125%. The Future Homes Standard ensures that all new homes built from 2025 will produce 75-80% less carbon emissions than homes under current regulations. The carbon reduction of 125% is from 100% regulated and 25% unregulated energy using heat recovery, low carbon and renewable technologies. The Zed House will be lived in and monitored over time in order to assess its performance on an ongoing everyday basis. We can’t wait to see the results.The future of housebuildingDesigned and developed to show what is achievable for the housebuilding market in terms of sustainability, the Zed House is a great example of how our homes could look in the next few decades. At Symphony we have a constantly evolving list of eco credentials that we use in everything we do. How this project worked is that Barratt challenged its supply chain partners to bring in the most cutting-edge products to help reduce its carbon footprint. We chose our Urban kitchen in Grey Walnut, as the door and drawer fronts are made from 100% recycled chipboard and the handles contain renewable coconut fibre. Not only that but the cabinets are also made from 49% recycled board while cutlery trays and drawer storage are all Hemp and Kenaf based. We thought this was the perfect example of how kitchens can be a sustainable and environmentally friendly purchase without sacrificing style. The stainless-steel sink from Franke was chosen as it contains 80% recycled materials and was supplied with a waste disposal unit that processes organic waste to reduce the amount of food waste going to landfill. The Insinkerator 4 in 1 tap supplies filtered water to reduce the need to purchase bottled water and therefore encourages the reduction of single use plastic. It also replaces the need for a kettle by providing boiling water, which reduces both energy usage from boiling a kettle but also only provides the amount of boiling that is required. The appliances were also selected for their sustainability credentials including energy efficiency and minimising water use. The worksurface is a carbon neutral material from the Sunlit Days collection from Silestone by Cosentino, the first carbon neutral quartz range in the engineered stone industry that contains recycled glass and minerals. Eco buildThe Zed House itself is made from a closed panel timber frame with highly insulated cladding. It also includes EV charging points, PV solar panels and battery storage. The interior comes with infra-red electronic hands-free taps, reducing water consumption by up to 80%, and a smart electric tariff that automatically moves energy usage to access the cheapest rates. EV charging pointWith more and more people looking to swap their fuel-guzzling car to an efficient electric model, the Zed House also comes with its own EV charging point. The Zed House is located on the main campus at the University of Salford. It contains a knowledge hub built into the garage to display all the products, technologies and results of the home’s occupation on an ongoing basis. We are thrilled to have been a part of this exciting project and can’t wait to see what the future holds.Further informationHead to https://www.barrattdevelopments.co.uk/showcase/z-house for more information on Barratt Homes and www.symphony-group.co.uk/sustainability for more information on Symphony’s sustainability credentials.

A significant milestone for not just the tidal sector, but for the development of renewable energy technology, Scottish engineering company Orbital Marine Power, Ltd. (Orbital) will soon launch the Orbital O2 – the world’s most powerful tidal turbine – in the waters off the Orkney Islands.We have been involved in the project since Orbital’s prototype SR2000 turbine was built in 2015, proving their technology and leading the way for the further optimised O2. As well as high-performance anti-corrosion coatings to protect the steel structure, we supplied Hempaguard X7 for the turbine rotor blades.

In the summer of 2007 the country witnessed extensive flooding with areas in England experiencing “over two months rainfall in just 14 hours.” Loss of water and electricity supply was experienced with thousands of homes. Providing protection against a 1 in 1000 year flood event involved building over 1 kilometer of reinforced concrete and sheet piled walls. As well as protecting the site from future flooding, the team at RHI Industrials worked in partnership with Lochrin Bain to ensure the security fencing system was fully integrated with the substations new flood defences.

The demand for an energy-efficient hot water distribution system was met by a single-pipe system with 850m of RAYCHEM HWAT-R self-regulating heating cables, managed by nine RAYCHEM HWAT-ECO smart controllers that interface seamlessly with the BMS. Eliminating the need for the secondary pipework of a conventional recirculation system saved space and achieved cost savings of between five and ten percent in material and installation time. Pipe freeze protection was also provided by RAYCHEM WinterGard self-regulating cables, supported by an AT-TS-13 surface-sensing electronic thermostat.

Castle Building Services, specified bespoke urinals from specialist stainless from Franke Sissons. Franke products all comply with CE Mark standards, WRAS and BMA water saving standards too, all products are guaranteed to perform for decades. Alan Castleton, Managing Director of Castle Building Services explains “The refurbishment of the washroom is a prestigious contract for us so we obviously wanted to deliver an outstanding job with products that will perform for many years. Franke has a long and impressive track record with high quality stainless steel and of course they are local too”.

Vattenfall is one of Europe's largest producers of electricity and heat an have markets in Sweden, Germany, Denmark and further.We have designed, fabricated and supplied the steel and GRP grating, barrier handrails and ladders to the Ormonde Wind Jackets wind farm.The 150MW wind farm is the first offshore wind farm to use steel jackets for the turbine and substation foundations. The jackets were transported offshore on cargo barges and secured onto the seabed by inserting the four legs into pre-driven piles the longest 'single-pull' electricity export cable installation in UK waters (42km).

The new £75 million Murray Royal Hospital, Perth was officially opened by Scotland’s First Minister Alex Salmond last year. The hospital provides state-of-the-art mental healthcare for adults from across Tayside. Franke supplied all manner of janitorial and healthcare washroom products to the project. Specification was exacting to ensure long and efficient product life and savings in water and energy use. Products from Franke Washroom Systems have included; an array of differing formats of HTM63 stainless steels sinks and worktops, disposal and janitorial units.

Franke Water Systems were thrilled to be chosen to provide the complete range of sanitaryware to the Kia Oval at Kennington for their redevelopment project. Products such as their composite Miranit washtroughs, stainless steel urinals, washbasins and WC’s plus complementing grab rails were all part of the installation. Martin Cosgrove from Mectric Solutions commented “Product quality was a huge factor in deciding on which supplier to choose for such a prestigious project and with a brand name like Franke, we knew we would get the best quality that would last for years to come, and still look good too!"

Franke products were chosen for the modern transformation of offices in Manchester. A range of products were provided, including 7 of the stunning Quadro Miranit washbasins and 16 franke Aqualine C self-closing pillar taps, which are particularly good for water conservation. “Product quality was a huge factor for this project, and Franke’s Miranit washbasins and taps provided a fantastic solution. Franke supplied from stock and all products we’re delivered to site on time. They provided a with a great service and products that will last for years to come!” commented Zuhaib Judge - Building Surveyor.

Aspen Stainless supplied bespoke stainless-steel solutions to the UK’s leading food producer Cranswick. Aspen worked closely with Trundley Design to design effective hygienic plant equipment for a number of food processing plants across the UK.The drainage system was installed to support the cleaning regime and water flow around the factory. This blended perfectly with the John Lord flooring design and allowed for waste to drain effectively into the surrounding channels and gullies; creating a seamless connection between the systems and prevented any standing waste and bacteria from building up.

Acoustics are a particular issue in swimming pools due to the large areas of tiling, and because water itself is also highly reflective of sound. Hawkins\Brown architects needed a material that would provide high performance sound absorption whilst being compatible with the specialist environmental conditions of a pool. As this is within a school, speech intelligibility is of particular importance for learning – and the BASWA discretely provides this crucial function. BASWA was chosen for its high acoustic performance and system quality including the marble surface coating, which may be used in high humidity environments as standard.

The Residence Nine Elms is a building that contains one, two, and three-bedroom apartments. They feature impressive views of the city with customized furnishings and a modern design. The building’s entrance and lobby contain luxurious décor. GRID Architects wanted to have an appropriate area in this part of the building for strong entrance matting to stop the visibility of dirt and water. CS’ Pediluxe entrance matting was chosen with colours Wrought Iron (Dark Grey) and Castle Grey (Light Grey) interior carpet inserts to prevent an extreme effect against the clear stone floor and brickwork in the lobby.

The original waterproofing on the Maternity Hospital roof had exceeded its serviceable life and begun experiencing water ingress, requiring urgent remedial work. Bristol City Council wanted to optimise the roof area by installing a high quality, long lasting PV array that would contribute to its Solar City scheme that aims to provide one gigawatt of solar power to Bristol by 2020. The installation needed to cause minimal disruption to ongoing work at the hospital and insulation upgrades were necessary to ensure the roof achieved the required 0.25 U-Value.

Profile 22’s award winning optima suite of casement and Tilt and Turn Windows along with matching PVCU doors were specified in the refurbishment of two tower blocks in Walsall, West Midlands. The windows are designed to deliver increased insulation and weather protection, which makes them the perfect choice for high-rise, exposed locations. Increasing energy efficiency was one of the key drivers of the refurbishment. They are capable of achieving WER of A++ and U-values of 0.8 W/m2K. Indicative performance measures are 600Pa for air permeability, 600Pa for water tightness and 2400Pa for wind resistance.

The new ECO Tapillo Tap Hand Dryers have been designed with both style and function in mind.Both the Tapillo Single Air Tap Hand Dryer and the Tapillo 2 in 1 Air and Water Tap Hand Dryer are beautifully made from top quality 304 stainless steel and manufactured to an exacting high standard.Each dryer boasts an air temperature sensor to automatically reduce the heater power, saving energy and money. A 2x stage air filtration process also provides ultra clean sanitised air.

This was a relatively small installation of under 100 sq metres of asbestos roof coating and metal gutter lining. The asbestos cement roof was first cleaned using a closed box pressure washer, with all waste water being filtered to 2 microns. The cleaned roof was coated using Liquasil's BBA Approved asbestos roof coating system, Asbestoseal. The metal gutter was cleaned and thn treated with SWT (Surface and wet tolerant) corrosion primer. Joints were treated with Non-Sag Sealer and the gutter lined with Liquasil One to provide a seamless lining.

The existing factory finish to this metal roof was degraded and failing in multiple places. The roof was cleaned and all existing GRP roof lights were replaced. Cut edge corrosion & spot rust was treated using Liquasil corrosion primer. An initial coat of Metalseal 20 was roller applied to all corrosion treated areas, followed by a single coat of Metalseal 20, spray applied to the entire roof area. The end result looks like a new roof and will easily provide 20 years protective, water resistant finish to this once poor roof.

Following a successful park and ride facility in the west of the city and to reduce traffic further, an east park and ride facility comprising 1800 car parking spaces as part of a regeneration scheme. The park and ride design focused on sustainability and protecting local habitats. Due to restrictions on run off levels Cornwall council opted for Porous Paving. ABG Sudspave 40 permeable pavers were installed on free draining aggregate to enhance surface water drainage. Sudspave was supplied pre assembles for rapid installation. The panels can be filled with topsoil, gravel or seeded.

Cornwall Council identified a requirement for a Porous Paving system for a park and ride being built in the east of the city. The system would need to meet all planning limitations relating to run off and cope with coach overrun as well as being able to resist the forces exerted by manoeuvring HGVs. Truckcell is a highly effective source control system that manages storm water run off, as well as a cost effective SuDS compliant porous paving solution that facilitates rapid installation. Truckcell is manufactured using 100% recycled plastic and can withstand frequent HGV overrun

The Aberavon Aqua Splash have developed a brand new outdoor Splash Pad with 30 water features. This update meant that the council were also looking for new washrooms to upgrade their leisure facilities for their customers.Our Quadro toilet cubicle was selected for the refurbishment. The architect deemed it the most suitable system, opting for SGL material means this washroom is built to last.The vanity units and duct panels were supplied Ready Plumbed which meant only the final connections needed to be completed on site. Read the whole case study on our website.

The renovation of a vinyl sports floor represented a saving of around 50% against the cost of a new floor and was completed in just five days. Working through deep cleaning, wet sanding, removing the sanded slurry from the floor and then neutralising with clean water, the surface was ready for the first coat of Bona Pure Colour to the centre section. Two coats of each colour were applied, followed by sports lines and a final transparent coat to seal the surface. The Bona Floor Care Program renovates and totally transforms the floor with new colours and graphics.

The project was developed by Wilkinson Eyre Architects, and its glazed structure has created a new independent global hub for debate on sustainable urban living. Its design intends to both reflect the building´s context and at the same time having a degree of transparency to help connect the building with its surroundings. In this project was used insulated glass materials with varying levels of transparency, allowing spaces to be naturally lit whilst controlling solar gain. Effisus Ecofacade system was applied as an integrated solution to ensure water and air tightness of all facade elements connections.

Silverlakes eco village in Dorset is a new build venture where the client wanted to achieve maximum sustainability.The houses, boat houses, garages and also communal areas such as the leisure centre required green roofs and M-Tray® was chosen due to its ease of transport and installation, and its square modular nature. Pre-grown, healthy sedum plants inside the plastic trays were laid onto the flat roofs across the village, providing an attractive dressing and improving storm water attenuation, thermal insulation and a magnet for wildlife.

The extensive use of wood cladding & decking were key elements of LSI architects’ design. However, given that ‘The Haven’ is in a flood zone, surrounded on three sides by water & constantly exposed to a high moisture content in the air, LSI needed to find a wood that they could be confident would deliver durability, dimensional stability & aesthetics. The glue laminated Accoya wood for the curved rear screen was manufactured by Newnham & Abel Ltd & hand finished with a protective merbau-coloured coating from WoodGuard by Guard Industrie. The same finish was factory applied to the cladding.

Aintree Racecourse is located in Sefton, Merseyside. The racecourse is best known for hosting the Grand National steeplechase. The grandstand was suffering badly from water ingress to the areas below due to the floor coatings and joint seals which had degraded over years of exposure to the elements. Koster flooring systems were specified to provide a long-term solution to the exposed areas, providing a decorative, slip-resistant finish suitable for UV exposure and the weather conditions faced in the UK. The completed area is the perfect spot to enjoy the worlds’ biggest horse race in 2021 and beyond.

The final phase of the £500m redevelopment of Kings Cross has been completed with the creation of a 75,000 sq ft square in front of the station.The square has granite benches with inset panels of high quality stainless steel grating supplied by Lang+Fulton, stunning lighting, trees and an area dedicated to art.The 11×66/25×2 heel-proof grating panels for the six separate seating areas were shaped to accommodate the up-lighters, the planting and adjacent watering points and were supplied in stainless steel grade AISI-316L with a satin finish.

A straightforward hardwearing concrete seal was required at the entrance which would withstand heavy footfall and provide a safe finish. Resuseal WB Clear is a water-based epoxy applied at around 40 microns per coat. This is formulated to penetrate and case harden a concrete surface giving it a much harder wearing surface which is less likely to crumble or degrade. As a clear coat the finish is a semi industrial type look which is often used in retail outlets and commercial buildings. This product is used throughout industry where the principal requirement is to dustproof a surface.

Howe Green manufactured and supplied a number of custom made wall access covers and 1050 Series floor access covers for Crossrail in London. The wall access solutions were custom made from 5mm of stainless steel and lockable for added security. They were required to provide reliable and stylish access to the lighting circuitry. The 1050 Series floor access covers were installed along the walkways of Adams place to give quick and easy access to the water, power and data feeding the station. Each cover had an additional load bearing to accommodate specific requirements.

Stoneworld’s involvement in this spectacular landscaping project from its early stages, to its fabulous completion have helped create a stunning garden at this luxury hillside home.Stoneworld products used here include Moleanos limestone pool copings, Raj Sandstone paving, Purbeck walling, Extra Thick Raj Sandstone wall copings. Plus every part of this project features our ability to create bespoke stonework in our masonry factory, eg digital templating for precision water jet cutting of pool copings, terrace copings and steps

The high performance attributes of Johnstone’s Trade’s products have helped to deliver an unbeatable finish for new state-of-the-art police training facilities. Johnstone’s Acrylic Durable Matt was used to provide the hardwearing finish required in the office areas, while Johnstone’s Acrylic Eggshell was applied in the staff shower areas as it is resistant to condensation.The floor of the impressive ballistics training area was painted with Johnstone’s Two Pack Epoxy Water Based Floor Paint. Johnstone’s Two Pack Anti-Graffiti Finish was applied to the concrete interior walls of the custody cells.

This long run of railings brought with it a number of manufacturing challenges and techniques. They needed to be curved in profile so they form a quayside post, curving and leaning inwards so they do not make a 'natural ladder' beside the water. The panels themselves are manufactured in mild steel, finished galvanised and then painted in satin finished graphite grey. The top rails are of a contrasting polished finished grade 316 stainless steel, finished satin brushed. The run of railings has a combination of straight and curved panels, meaning each individual horizontal infill bar needed to be curved individually.