Zinc Standing Seam Roof System

VMZINC standing seam system:

• Is a roof and facade covering system.

• Can be installed down to a minimum 3° pitch.

• Can be laid in lengths up to 13 m without the need for expansion steps.

• Can be used for cold/ ventilated or warm roofing.

• Adapts to the simplest or the most complex roof shapes.

• Can be used to cover soffits (box gutter overhangs, etc).

• BBA certificates exist for the VMZ Structural Roof (12/4900 sheet 1) and VMZ Compact Roof (12/4900 sheet 2).

The profiled panels are held in place at the top of the pitch by fixed clips and on the sides by sliding clips distributed along the length of the panel. These clips, which are fixed to the structure, are crimped inside the joints.

Applications:

• Warm roof on mineral wool or PIR - requires continuous fully supported Al foil bituminous back vapour barrier.

• Warm roof on metal composite panels.

• Warm roof on cellular glass.

• Warm roof on plywood faced insulation, requires continuous fully supported Al foil bituminous back vapour barrier.

• Ventilated roof on roof boarding (only support where non-PLUS material is authorized).

• Ventilated roof on plywood support.