Offset angle tie for use with offset or irregular positioned columns in relation to the masonry walling.
For tying masonry to steel columns.
Wincro recommends the use of Wincro WBSDZP self-drilling, self-tapping tek-screws and WIP isolation patches when fixing to steel columns to avoid the effects of bi-metallic corrosion.
Offset angle tie designed to provide an effective solution for site issues with offset or irregular positioned columns in relation to the masonry walling. A bespoke stainless steel angle cleat with pre-welded restraint tie for use when the masonry is in line with a column flange or at an irregular angle.
The angle section is designed to suit each application and features a 7 mm fixing slot to provide vertical tolerance. A 100 mm projection safe end tie is provided with other sizes available. The tie can also be used with a WDS de-bonding sleeve when used at vertical movement joints.
Features and benefits:
Applications:
For tying masonry to steel columns.
Wincro recommends the use of Wincro WBSDZP self-drilling, self-tapping tek-screws and WIP isolation patches when fixing to steel columns to avoid the effects of bi-metallic corrosion.
Material | Stainless steel grade 1.4301 (304) |
Uniclass 2015 | |
CAWS | F30/220 Wall ties F30/24 Cavity wall ties F30/290 Proprietary special fixings |
Product Reference | WTS3UC Offset Angle Tie |
Length | 100 mmStandard. Special orderInsert requirement. |
Width | Consult manufacturer and insert requirement. |
Thickness | Consult manufacturer and insert requirement. |
Standard product features | Material: Stainless steel grade 1.4301 (304). |