Watco Epoxyline
Verified by manufacturer 5 months ago
Industrial strength, line marking paint. Available in 190 RAL colour variations.
Application
Surface preparation
All surfaces should be clean and dry before application. On painted or sealed surfaces remove any poorly bonded material and abrade well-bonded paint or sealer to provide a key. A trial area is recommended on smooth, shiny surfaces to test adhesion. Edges of lines should be defined with masking tape.
Mixing
Thoroughly stir the contents of the smaller resin tin before emptying it into the larger curing agent tin. It is very important that all the contents of the resin tin are decanted and thoroughly mixed with the curing agent with a wide-bladed tool until an even colour is obtained.
Application
If appearance is critical we recommend the application of a small trial area first.
Best results are achieved in warm (minimum 15°C), dry conditions with good air circulation. In very high temperatures (30°C and above) it is recommended that bare concrete is lightly dampened first with water. Ideally, use a brush and apply sufficient paint to obliterate the substrate. Do not overbrush. Remove masking tape 1 to 2 hours after painting.
Description
A line marking paint for use in heavy wear areas or areas subject to chemical spillage. This two-part epoxy resin formulation can be applied with a brush or a roller and has excellent resistance to abrasion and harsh chemicals.
Features and benefits:
- It can be applied to bare concrete or well-bonded paint.
- Touch dry overnight. Full chemical resistance in 5 days.
- Virtually solvent free and odourless.
Areas of use:
- Heavy wear areas
- Areas subject to chemical spillage
- Safe traffic routes on floors
- Highlighting hazards such as step edges
Recommended for internal use only. For exterior use Watco Toughline
General information
Color | White Yellow Beige Black Blue |
Finish | Semi-gloss Guidance for specification option: A brush-applied coat on most surfaces will produce a tough semi-gloss finish. |
Material | Epoxy resin Guidance for specification option: Water based. |
Uniclass | |
CAWS | M60/195 Special coating M60/18 Special coating |
Product range |
Specification data - Line marking paints
Purpose | Highlighting hazard areas, and identifying safe traffic routes for employees and visitors to the site. |
Colour | Beige.Black.Blue.Brown.Green.Grey.Orange.Pink.Purple.Red.Teal.White.Yellow. |
Volatile organic compound (VOC) level | 10 g/L. |
Sustainability data
Country of product manufacture | United Kingdom |
Literature
Technical Data Sheet: Epoxyline
Case studies
Water bottling plant - anti slip floor coating/ line marking paint