UVF-1100/250 F7 ECOWATT
Low consumption acoustic cabinet fans with integrated filter.
Cabinet fans with integrated, low-pressure drop filters, manufactured from galvanized sheet steel and internally isolated with 30 mm thick fireproof acoustic mineral wool (M0), airtight intake and discharge joints, easy access to filters by, rotary traction type closures.
Equipped with backward curved centrifugal impellers. Brushless, high performance and low consumption EC motor, 230V ± 10% 50/60Hz power supply, IP44, ball bearings, thermal protection, ON/OFF switch with built-in potentiometer to adjust speed and analogue input 0-10V signal to control the fan. All models have the capacity to mount up to three filters.
F7 Version: Supplied with F7 filter. It is possible to add a second high-efficiency filter and a pre-filter, both accessories. − Version with F7 filter + F9 filter. It is possible to add a pre-filter (accessory).
High-efficiency filter assembly system with clamping arms which allows the adaption to one or two filters. Thanks to the threaded knobs, it is possible to tight the union between the filter and frame well, minimizing the external air by-pass comparing with the usual filter in a guide mounted filters. It is recommended to add a pre-filter (G4 or M5 supplied as accessory) to extend the useful service life of the high-efficiency filters. Filtration efficiency according to ISO-16890 of F7+F9 version ePM10 = 99.5%, ePM2.5 = 98.5%, ePM1 = 96.2%.
Consult technical literature for information on performance values including airflow, speed and sound pressure level.
Features and benefits:
To ISO 5801.
Backward inclined plate.
Up to 750 l/s.
-20°C to 40°C.
Galvanized sheet steel.
ACOPEL F400 N.
Circular flexible couplings.
Rubber anti-vibration supports that dampen vibrations and reduce the installation’s noise level. (1KSE = 4 supports per bag).
Discharge protective guard
Specific accessory to control the ventilation part of the UVF-ECOWATT and UTBS-ECOWATT fan units. It is supplied as an accessory (wiring and installation not included).
CO2 and temperature sensor. With display.
CO2 conduit sensor. It allows fan control according to the CO2 concentration in the air circulating through the exhaust duct. Outlet: 0-10V. Power supply: 24 VDC.
Indoor air quality control element that includes an internal CO2 sensor. Specially designed to create DCV systems directly connected with single-phase fans or ECOWATT depending on whether the control output is through relay or analogue signal.
770 x 413 x 334 mm.
230 V (50-60 Hz).
CAB ECOWATT | Acoustic Box Fan Series
CVAB/T-N ECOWATT | Acoustic Box Fan Series
ILHT KITCHEN CC/MV | High Temperature Kitchen Extract Fan Series
IRAB/T-N | Acoustic Rectangular Duct Fan Series
IRB ECOWAT | Rectangular Duct Fan Series
JETLINE ECOWATT | Circular Duct Fan Series
MELLIZO | Acoustic Twin (Run-And-Standby) Duct Fan Series