Upstand Board
Description

Zero ODP insulated upstand boards are manufactured from a CO2 blown extruded polystyrene ‘Styrofoam-A foam’ bonded to a weather resistant high impact facing board. Used for thermal insulation and protection of upstand walls in flat roofing.

Fire resistance:

The impact resistant facing board complies with the performance requirements of Class O of the Building Regulations, is incombustible to BS 476-4 and is rated Class 1 surface spread of flame to BS 476-7.

Finish:

Where required the facing board may be painted without any special priming using an alkali resistant paint or emulsion. Two coats of paint will usually give a satisfactory finish. Suitable paints are:Acrylics, Chlorinated rubber, Epoxy, PVA, PVC, Polyurethane and silicate.

General information

Finish

Where required the facing board may be painted without any special priming using an alkali resistant paint or emulsion. Two coats of paint will usually give a satisfactory finish. Suitable paints are:Acrylics, Chlorinated rubber, Epoxy, PVA, PVC, Polyurethane and silicate

Size

1200 x 600 mm

Uniclass 2015

Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary

CAWS

J21/10 Warm deck roof coating

J21/440 Inverted roof insulation

J31/10 Warm deck roof coating

J31/332 Extruded polystyrene (XPS) warm deck roof insulation

J41/10 Built-up reinforced bitumen membrane warm deck roof covering

Show more
Specification data - Extruded polystyrene (XPS) boards

Product Reference

Floor Units

Standard product features

Size:

1200 x 600 mm.

Thickness:

56 mm (50 mm Styrofoam-A foam + 6 mm facing board).

Similar products from AIM