Unleaded System 2000 Horizontal Cavity Trays

Horizontal cavity tray system for all types of brick, block and stone new build constructions or remedial work on existing walls.

Features and benefits:

• Can be specified separately with a pre-applied polystyrene strip mortar barrier.

New build:

• 150 mm-high back upstand exceeds minimum requirements.
• Low profile lapped joint between sections allows any length of brick, block or stone to be used without difficulty.
• Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
• Cavity tray builds into the outer leaf only to speed up installation to allow both inner and outer leafs to be built independently if required.
• Choice of two lengths: 880 mm for general use; 460 mm to reduce waste when making up a run of cavity tray to the required length.

Refurbishment:

• Compact size and design allows insertion into an existing wall without ever having to remove more than three bricks at any one time.
• Low profile lapped joint between sections allows for variations in brick size.
• Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
• Cavity tray builds into the outer leaf only, so there is no need to disturb the inner wall of the building.

Quality:

• Satisfies all NHBC requirements.
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
• Complies with all relevant Building Regulations.
• Meets all relevant British Standards.