NBS Source
I'm a manufacturer
Compare variants

Unleaded Everdry Stepped Cavity Trays for Blockwork

Verified by manufacturer 6 months ago

625 mm Intermediate Cavity Tray, Right Handed

Timloc Building Products Variant:

Stepped cavity tray system for blockwork/ stonework construction of 225 mm course heights.

Jump to:
+44 (0)1405 765567 Website

Application

  • At the abutment of a pitched roof with a cavity wall.
  • On external walls (not exceeding 150 mm thickness) built from blockwork or stone with regular course heights, including mortar of approx. 225 mm.
  • On roof pitches of 12.5° and above.
  • Clear cavity widths of 50–125 mm.

Description

Stepped cavity tray system for blockwork/ stonework construction of 225 mm course heights.


Features and benefits:

  • 150 mm high back upstand exceeds minimum requirements.
  • Permanent stopend protects the perpendicular joint and cuts out water backtracking along the blockwork/ stonework.
  • Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
  • Choice of two lengths:
  1. 625 mm for roof pitches of 25° or above;
  2. 1250 mm for roof pitches of 12.5–22.5°.
  • Can be specified separately with a pre-applied polystyrene strip mortar barrier.
  • Leaded version also available, consult manufacturer for details.


Quality:

  • BBA approved.
  • Satisfies all NHBC requirements.
  • Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
  • Complies with all relevant Building Regulations.
  • Meets all relevant British Standards.

General information

Color

Black

Material

Polyethylene

Guidance for specification option:

2.0 mm-thick, medium density, vacuum formed.

Uniclass

Pr_25_57_21_66 Preformed cavity traysPrimary

CAWS

F30/56 Preformed cavity trays

F30/370 Preformed cavity trays

Specification data - Preformed cavity trays

Third party certification

BBA approved.

Material

Polyethylene (PE), 2.0 mm-thick, medium density.

Guidance for specification option:

Vacuum formed.

To fit cavity width

To suit clear cavity widths of 50–74 mm.

To suit clear cavity widths of 75–99 mm.

To suit clear cavity widths of 100–125 mm.

Manufacturer guidance

Product code will vary with external wall thickness specified.

Height

225 mm.

Length (effective)

625 mm.

Guidance for specification option:

Roof pitches of 17.5–22.5°.

WallThickness

External wall thickness (bed) : 100 mm.

External wall thickness (bed) : 125 mm.

External wall thickness (bed) : 150 mm.

Similar products from Timloc Building Products

Lintel Stop End

Lintel Stop End

Unleaded Everdry Stepped Cavity Trays for Brickwork

Unleaded Everdry Stepped Cavity Trays for Brickwork

Unleaded Everdry Stepped Cavity Trays for Stonework

Unleaded Everdry Stepped Cavity Trays for Stonework

Unleaded Inter-loc Horizontal Cavity Trays

Unleaded Inter-loc Horizontal Cavity Trays

Unleaded System 2000  Horizontal Cavity Trays

Unleaded System 2000 Horizontal Cavity Trays