Verified by manufacturer 1 month ago
BBA Agrément Certificate
Certificate type
ISO 9001 Quality Management
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
Two-component PMMA-based roof waterproofing resin system applied wet-on-wet to the first layer.
IKO metatech is used as a fully reinforced waterproofing resin in the following liquid waterproofing systems:
In IKO metatech systems, the waterproofing consists of a two-component liquid waterproofing product based on PMMA. The waterproofing product is applied swiftly, as the second layer is applied wet-on-wet to the first layer and cures quickly in just 45 minutes. Our IKO metatech systems are ideal for surfaces that need to be released quickly. IKO metatech systems can be used for a wide variety of projects, including flat roofing, car parks, balconies, walkways, and stairways.
Features and benefits
Color | Grey |
Material | Polymethyl methacrylate (PMMA) |
Length | Bespoke |
Width | Bespoke |
Warranty description | 20 year Manufacturer guidanceTen to 25 year. |
Uniclass | |
CAWS | J31/120 Warm deck roof coating J31/353 Waterproof coating J31/10 Warm deck roof coating |
Product range |
Preparation | |
Horizontal work | IKOpro Bonding Agent.Guidance for specification option: IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C. IKOpro Sprayfast MPP.Guidance for specification option: KOpro Sprayfast MPP (Black, Multipurpose Primer) is a specially formulated high performance bonding primer. It allows the speed of application of the bonding primer to be five times faster than conventional bitumen primers, promoting strong bonds at temperatures as low as 5°C. For self adhesive and torch applied bitumen membranes. IKOpro Quick Dry Primer.Guidance for specification option: IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes. |
Skirtings and vertical work | IKOpro Bonding Agent.Guidance for specification option: for self adhesive bitumen membranes only IKOpro Sprayfast MPP.Guidance for specification option: for self adhesive and torch applied bitumen membranes IKOpro Quick Dry Primer.Guidance for specification option: for torch applied bitumen membranes |
Air and vapour control layer | IKO Ultra S-A Air and Vapour Control Layer.Guidance for specification option: Self adhesive for combustible substrates S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps. IKO Ultra T-O Air and Vapour Control Layer.Guidance for specification option: Torch applied to non combustible substrates only T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation. |
Insulation | |
Type | IKO enertherm Gold Insulation, 2400 x 1200 mm.Guidance for specification option: Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements. IKO enertherm Gold Insulation, 1200 x 1200 mm.Guidance for specification option: Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements. IKO enertherm MW, 60 mm thickness.Guidance for specification option: A dual-density stone wool insulation board. It is used for the thermal insulation in a variety of warm flat roofing system applications where a non-combustible and/ or acoustic insulation solution is required. Width: 1200 mm. IKO enertherm MW, 120 mm thickness.Manufacturer guidanceIKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. |
Fixing | IKOpro PU bonding adhesive.IKOpro Sprayfast IBA. |
Carrier membrane | |
Type | IKO Ultra H-A Underlay.Guidance for specification option: IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m. |
Fixing | Bonded by heat activation to primed insulation board (laps heat welded). |
Liquid-applied waterproofing | |
Type | IKO metatech waterproofing.Guidance for specification option: A two-component coating based on methacrylates that cures after the hardener powder has been incorporated. Apart from fast curing (after only 45 minutes), IKO metatech Detail is also characterised by rapid installation, as the second layer is applied wet-on-wet to the first layer. |
Reinforcement | IKO 110 sgm Polyester Fleece.Guidance for specification option: A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the wet first layer of IKO metatech Detail and pressed in areas that are subject to heavy footfall. It therefore ensures the strength, stability and longevity of the system. |
Colour | Stone grey, RAL 7043. Pebble grey RAL 7032. |
Density | +/- 1,22 g/cm³. Guidance for specification option: This relates to the IKO Metatech coating. |
Hardness | +/- 62 (Shore A 23°C). Guidance for specification option: This relates to the IKO Metatech coating. |
TensileStrength | +/- 4,5 N/mm². Guidance for specification option: This relates to the IKO Metatech coating. |
Elongation | +/- 240%. Guidance for specification option: This relates to the IKO Metatech coating. |
Viscosity | +/- 17 dPas (25°C, 20 rpm, spindle3). Guidance for specification option: This relates to the IKO Metatech coating. |
Curing time | Pot life: +/- 15 min. Rain proof: +/- 30 min. Can be walked on: +/- 45 min. Fully cured: +/- 2 h. Manufacturer guidanceThis relates to the IKO Metatech coating. |
Storage | 12 months in the hermetically sealed packaging, when stored in a dry, Guidance for specification option: Keep the edges of the tin clean. When closing the tin, place the lid and the lever lock ring in the correct way and remove any product that might remain on the tin. |
Standards | To ISO 9001, ISO 14001. |
Material | Polymethyl methacrylate (PMMA) |
Brochure - IKO PLC (UK) ESG Report
Brochure - IKO metatech Liquid Applied Waterproofing Systems
IKO flexia Decorative Finishes for IKO metatech Systems
Technical Data Sheet (TDS) - IKO Deco Chips
Technical Data Sheet (TDS) - IKO Dorsilit
Technical Data Sheet (TDS) - IKO enertherm GOLD
Technical Data Sheet (TDS) - IKO enertherm MW
Technical Data Sheet (TDS) - IKO enertherm XPS & WCL
Technical Data Sheet (TDS) - IKO metatech Bitumen Primer
Technical Data Sheet (TDS) - IKO metatech Cleaner
Technical Data Sheet (TDS) - IKO metatech Detail Fibre
Technical Data Sheet (TDS) - IKO metatech Detailing
Technical Data Sheet (TDS) - IKO metatech Finish
Technical Data Sheet (TDS) - IKO metatech Floor L
Technical Data Sheet (TDS) - IKO metatech Floor P
Technical Data Sheet (TDS) - IKO metatech Mortar L
Technical Data Sheet (TDS) - IKO metatech Mortar P
Technical Data Sheet (TDS) - IKO metatech Porous Primer
Technical Data Sheet (TDS) - IKO metatech Surfacer
Technical Data Sheet (TDS) - IKO metatech Textured Finish
Technical Data Sheet (TDS) - IKO metatech Waterproofing
Technical Data Sheet (TDS) - IKO Micro Chips
Technical Data Sheet (TDS) - IKO Polyester Fleece 110
Technical Data Sheet (TDS) - IKOpro Bonding Agent
Technical Data Sheet (TDS) - IKOpro Bridging Tape
Technical Data Sheet (TDS) - IKOpro PU Insulation Adhesive
Technical Data Sheet (TDS) - IKOpro Quick Dry Bitumen Primer
Technical Data Sheet (TDS) - IKO ULTRA Torch-On Vapour Control Layer (VCL)
Technical Data Sheet (TDS) - IKO ULTRA Self-Adhesive Vapour Control Layer (VCL)
Technical Data Sheet (TDS) - IKO ULTRA Heat-Activated Underlays
Technical Data Sheet (TDS) - IKO tech Non-Porous Primer
Technical Data Sheet (TDS) - IKO shield PLUS ALU SA
Technical Data Sheet (TDS) - IKO ROUTE HD
Technical Data Sheet (TDS) - IKO Quartz Sand 6 to 12 (mm)
Technical Data Sheet (TDS) - IKO Quartz Sand 3 to 6 (mm)
Technical Data Sheet (TDS) - IKOpro Sprayfast MPP
Technical Data Sheet (TDS) - IKOpro Sprayfast IBA