Verified by manufacturer 3 months ago
Single component cold applied liquid waterproofing system.
Warm flat roof constructions.
A solvent free and odour free single-component liquid waterproofing system based on flexible hybrid polymers. It cures through reaction with the air humidity and it is used as a fully reinforced waterproofing resin in the IKO hybritech Liquid Waterproofing System.
Features and benefits:
Color | Grey |
Material | Polymer |
Length | Bespoke |
Width | Bespoke |
Warranty description | 20 year |
Uniclass | |
CAWS | J31/120 Warm deck roof coating J31/353 Waterproof coating J31/10 Warm deck roof coating |
Product range |
Preparation | |
Horizontal work | IKOpro Bonding Agent.Guidance for specification option: IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C. IKOpro Sprayfast MPP.Guidance for specification option: KOpro Sprayfast MPP (Black, Multipurpose Primer) is a specially formulated high performance bonding primer. It allows the speed of application of the bonding primer to be five times faster than conventional bitumen primers, promoting strong bonds at temperatures as low as 5°C. For self adhesive and torch applied bitumen membranes. IKOpro Quick Dry Primer.Guidance for specification option: IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes. Hybritech Bitumen Primer.Guidance for specification option: IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. |
Skirtings and vertical work | IKOpro Bonding Agent.Guidance for specification option: for self adhesive bitumen membranes only IKOpro Sprayfast MPP.Guidance for specification option: for self adhesive and torch applied bitumen membranes IKOpro Quick Dry Primer.Guidance for specification option: for torch applied bitumen membranes Hybritech Bitumen Primer.Guidance for specification option: IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. |
Air and vapour control layer | IKO Ultra S-A Air and Vapour Control Layer.Guidance for specification option: Self adhesive for combustible substrates S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps. IKO Ultra T-O Air and Vapour Control Layer.Guidance for specification option: Torch applied to non combustible substrates only T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation. |
Insulation | |
Type | IKO enertherm Gold Insulation, 2400 x 1200 mm.Guidance for specification option: Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements. IKO enertherm Gold Insulation, 1200 x 1200 mm.Guidance for specification option: Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements. IKO enertherm MW, 60 mm thickness.Guidance for specification option: A dual-density stone wool insulation board. It is used for the thermal insulation in a variety of warm flat roofing system applications where a non-combustible and/ or acoustic insulation solution is required. Width: 1200 mm. IKO enertherm MW, 120 mm thickness.Manufacturer guidanceIKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. |
Fixing | IKOpro PU bonding adhesive.IKOpro Sprayfast IBA. |
Carrier membrane | |
Type | IKO Ultra H-A Underlay.Guidance for specification option: IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m. |
Fixing | Bonded by heat activation to primed insulation board (laps heat welded). |
Liquid-applied waterproofing | |
Type | IKO hybritech waterproofing.Guidance for specification option: KO hybritech is a isocyanate free, solvent free and odour free single component coating based on flexible hybrid polymers. IKO hybritech cures through reaction with the air humidity. |
Reinforcement | IKO 110 sgm Polyester Fleece. |
Colour | Dusty grey (RAL 7037). |
Density | +/- 1,37g/cm³. Guidance for specification option: This relates to the waterproof coating layer. |
Viscosity | +/- 6.500 mPas (25°C, 5 rpm, spindle 5). Guidance for specification option: This relates to the waterproof coating layer. |
Hardness | +/- 80 (Shore A 23°C). Guidance for specification option: This relates to the waterproof coating layer. |
TensileStrength | +/- 5 N/mm². Guidance for specification option: This relates to the waterproof coating layer. |
Elongation | +/- 120%. Guidance for specification option: This relates to the waterproof coating layer. |
Application temperature | Air temperature: 5°C - 35°C. Substrate temperature: 5°C - 30°C. Product temperature: 5°C - 30°C. Manufacturer guidanceThis relates to the waterproof coating layer. |
Storage | 6 months in the hermetically sealed packaging, when stored in a dry, Guidance for specification option:
Manufacturer guidanceThis relates to the waterproof coating layer. |
Standards | To ISO 9001, ISO 14001. |
Material | Polymer |