High tensile roofing and wall cladding.
Suitable as roofing and walling on commercial and industrial buildings. Ideal as roofing on carports, garages and patios, and as fencing, fascia and facade work.
Trimclad® is a custom length, high tensile roofing and wall cladding manufactured from COLORBOND®, ZINCALUME® and galvanised steels. Some of its features are:
Sizes are cut to order, dependent on load limit regulations set by local transport authorities.
Pr_25_71_51_89 Steel profiled sheetPrimary
07600 Metal Roofing, Siding and Roof Plumbing
NATSPEC National Classification System
0421 Roofing - combined
0423 Roofing - profiled sheet metal
0436 Cladding - profiled and seamed sheet metal
0431 Cladding - combined
07462 Cladding External Walls
07610 Roofing and Roof Plumbing
Base Metal thickness (BMT)
If installed as roofing, minimum pitch of 2° (1 in 30) is required. Maximum spans are based on N2 wind category and 1.5 mm substrate.
Available for walling applications only.
Maximum spans of 2400 mm for end span and 3000 mm for internal span.
Available in a range of COLORBOND® steel colours.
Comes in standard aluminium colour for ZINCALUME® steel.
Category of use
3.53 kg/m² (0.35 mm COLORBOND® steel)
4.35 kg/m² (0.42 mm COLORBOND® steel).
4.93 kg/m² (0.48 mm COLORBOND® steel).
3.70 kg/m² (0.35 mm ZINCALUME® steel)
4.28 kg/m² (0.42 mm ZINCALUME® steel).
4.81 kg/m² (0.48 mm ZINCALUME® steel).
Sizes are cut to order. Recommended maximum runs are 17 m for dark-coloured sheeting and 24 m for light-coloured sheeting.
Allow for a manufacturing tolerance of ±10 mm.
Use in conjunction with Design Notes. Dependent on fastener frequency, span type and support thickness.
Frame or support
0.48 mm to 1.5 mm BMT steel supports.
1.5 mm to 4.5 mm BMT steel supports.
Contact local manufacturer if to be used within 1 km of industrial, chemical, marine or corrosive environments.
Trimclad® is not compatible with lead, copper, bare metal and some chemically treated timbers.
Country of product manufacture