Aluminium standing seam system.
The product can be used to cover complex surfaces such as barrel vaulted roofs and domes. It can be laid on a ventilated timber substrate, composite panel and direct onto insulation, using special warm roof fixing clips.
A standing seam system with traditional detailing, giving an aesthetically pleasing finish whilst avoiding the industrial finishes found in contemporary standing seam systems.
Features and benefits:
Suitable substructure materials:
ISO-Mat Pro® is recommended by the manufacturer.
H72/110 Aluminium sheet fully supported roof covering
H72/130 Aluminium sheet fully supported wall covering
H72/2 Aluminium sheet fully supported roof covering
Reaction to fire
To EN 13501, A1.
Traditional Textures Standing Seam
Alternative (bespoke) lengths are available, if they are logistically possible to transport. Consult manufacturer for details.
Insert project requirements, maximum 12 m.
Other centres on request; consult manufacturer for details.
25 x 430 mm.
Minimum pitch: 5°, 530 mm centres.
38 x 417 mm.
Minimum pitch: 3°; 517 mm centres.
The precoated aluminium is also available in any RAL colour as well as many other specialist finishes. Consult manufacturer for details.
Blue Zinc Patina.
Dark Zinc Patina.
Green Zinc Patina.
Red Zinc Patina.
RAL 7016, Anthracite grey.
Coating thickness (minimum)
50 µm (three coats).
To NF EN 1396, Class 4.