Traditional Textures Reveal Panel

Application

  • Typically fixed back to timber or metal sub frames with a pressure equalized, ventilated cavity.
  • The reveal panel is also suitable for use as a soffit system.

Description

Reveal panel suitable for cladding applications. Installation is straightforward, one panel interlocking into the next with a concealed fixing.


Features and benefits:

  • Suitable for situations where traditional metal roofing is preferred but with a requirement for a flatter appearance than standing seam type systems.
  • Can be manufactured in various widths/ shadow gap combinations.
  • Panels can be installed horizontally, vertically or diagonally.
  • Bespoke reveal panels design is also available, consult manufacturer for details.
  • A standard range of details are also available, consult manufacturer for details.
  • Resistance to cracking on rapid deformation to EN 13523-5 and ASTM D 2749: No cracking, no loss of adhesion.
  • Resistance to cracking on bending to EN 13523-7 and ASTM D 870: Very good flexibility (0.5T).
  • Water immersion (and humidity) resistance to EN 13523-9/ 25 and ASTM D 870/ 2247: 3000 h.

General information

Material

Aluminium

Uniclass 2015

Pr_25_71_51_02 Aluminium long stripsPrimary

CAWS

G20/950 Fascias/ barges/ soffits

G20/99 Fascias/ barges/ soffits

H31/10 Metal

H31/120 Metal

Specification data - Aluminium long strips Enhanced data

Width

Up to 333 mm; insert requirements.

-

Factory finishes

The precoated aluminium is also available in any RAL colour as well as many other specialist finishes. Consult manufacturer for details.

Copper Oxide.

Copper Patina.

Dark Zinc Patina.

Zinc Patina.

RAL, other.

Insert requirements.

Blue Zinc Patina.

Available on request.

Copper Metallic.

Available on request.

Corten.

Available on request.

Graphite Patina.

Available on request.

Green Zinc Patina.

Available on request.

Inca Gold.

Available on request.

Red Zinc Patina.

Available on request.

Thickness

1 mm.

Reaction to fire

-

External face

To EN 13501, A1.

Product Reference

Traditional Textures Reveal Panel

Orientation

Vertical.

Horizontal.

Diagonal.

Insert required angle.

Colour/ Finish

Copper Oxide.

Copper Patina.

Dark Zinc Patina.

Zinc Patina.

RAL, other.

Insert requirements.

Length

Insert requirements.

-

Joint width

1–20 mm.

-

Coating thickness (minimum)

50 µm (three coats).

Durability

To NF EN 1396, Class 4.

Literature

Similar products from Metal Solutions Limited