Sloping roof ventilator that can be introduced within a tiled surface.
Sloping roof ventilator for use at high or low level in the slate and tiled roofs of new and refurbishment work.
Normally used on roof pitches from 20 degrees up to 70 degrees.
A roof ventilator used at high or low level in slate and tiled roofs, incorporating an integral baffle and grille in the moulded base and a coloured ventilation cap.
Features and Benefits:
Un-plasticized polyvinyl chloride.
405 x 440 mm
Size of base. (Size of vent cap 293 x 210 mm).
H60/86 Ventilator tiles
H65/840 Ventilator tiles
H65/86 Ventilator tiles
Roof void ventilator.
To ventilate above insulation in each rafter space.
15 000 mm²/m.
Equivalent to 5 mm continuous gap when installed at 3 m centres; 10 mm continuous when gap installed at 1.5 m centres.
An optional adaptor permits this ventilator to be connected to a standard 110mm pipe if required.
Installing roof slope ventilator tiles.
Tiled Roof Ventilator