NBS Source
List your products

TG66 Ballasted Roof System - Sarnavap 5000E SA and S-Felt T 300

Third party certifications:
  • BBA Agrément Certificate

    Certificate type

Sika Sarnafil

Single-ply roofing system for ballasted warm roofs.

Jump to:
+44 (0)1707 394444 www.sarnafil.co.uk
Description

Flexible Polyolefine (FPO) single-ply roofing system for ballasted warm roofs and inverted roofs.

System includes:

  • Stone ballast/precast concrete flag surface protection (supplied by others).
  • Sarnafil S-Felt T 300 upper protective layer.
  • Sarnafil TG66 waterproof membrane.
  • SarnaTherm G insulation.
  • Sarnavap 5000E SA vapour control layer.

- Upper protective layer:

A protection sheet based on flexible polyolefins (FPO) with inlay of glass non-woven containing flame retardant.

- Waterproof membane:

Sarnafil TG66 membranes are manufactured using a specially developed in line extrusion coating process. This coats both sides of the glass-fibre carrier simultaneously with a compounded Flexible Polyethylene to produce a dynamically stable membrane, which is suitable for adhered and loose laid ballasted applications.

The process enables between 2% and 5% of recycled material to be used in the production of new membranes.

- Insulation:

Rigid polyisocyanurate foam insulation boards to BS EN 13166; with mineral tissue facing. Available in uniform thickness or tapered.

- Vapour control layer:

A 0.60 mm thick, high-performance, self-adhesive vapour control layer, manufactured from polymer modified bitumen, with glass fibre reinforcement and aluminium foil top layer. Suitable for use in high humidity environments, green roofing systems, loose-laid ballasted warm roof systems and all adhered and mechanically fastened systems. Can be used as a temporary waterproof layer for up to 4 weeks, in strict accordance with the product data sheet.

Performance:

Certified by BBA to have a life expectancy in excess of 25 years.

Installation:

- Upper protective layer:

Loose laid according to the valid installation instructions for Sarnafil® If necessary, S-Felt T 300 can be tacked to the substrate with Sarnacol® T 660. Adjoining sheets must overlap at least 100 mm.

- Waterproof membrane:

Sarnafil TG66 is intended to be loose-laid and ballasted. Installation is carried out by Sarnafil contractors, who are specifically trained in the installation requirements of Sarnafil T membranes.

- Insulation:

SarnaTherm G can be attached to the substrate (deck or suitable vapour control layer) by mechanically fastening with SBT tubes and SBIW-70x70 pressure plates, or by bonding to Sarnavap 5000E SA using Sarnacol 2162 cold bonding adhesive or Sika C250 spray applied adhesive. SarnaTherm G can be loose laid if sufficient ballast weight is provided immediately to resist wind uplift pressures.

A vapour control layer will be required when SarnaTherm G is used.

- Vapour control layer:

Sarnavap® 5000E SA is self-adhered to the substrate. Include Sarnafil Primer 600 to the substrate, and in addition metal deck may need de-greasing using Sarnafil T Prep.

General information
Specification data
Product Reference

TG66 Ballasted Roof System - Sarnavap 5000E SA and S-Felt T 300

Primer

Not required

Primer 501

Primer 600

Spray primer 610

Waterproof membrane -
Type

Sarnafil TG66

Thickness

1.5 mm

1.8 mm

2.0 mm

Colour

RAL 7040 Window grey

Attachment

Loose laid

Insulation -
Type

SarnaTherm G

SarnaTherm G Tapered

Thickness

Consult Sika Sarnafil for recommendations and details.

Attachment

Loose laid

Upper protective layer

Sarnafil S-Felt T 300

Vapour control layer -
Type

Sarnavap 5000E SA

Attachment

Self-Adhered

Accessories

Double LT rainwater outlets

Sarnafil T clean

Sarnafil T prep

Sarnametal T

Sarnaplast 2235

Sarnavap jointing tape

TG/TS rainwater outlets

Standard product features

Upper protective layer:

- Surface:

Smooth.

- Colour top/bottom surface:

Greenish/ dark grey.

- Roll size (l x w):

25 x 2 m.

- Thickness:

1.3 mm.

- Roll weight:

65 kg.

- Reaction to fire to BS EN 11925-2 (classification to BS EN 13501-1):

E.

- Tensile strength:

≥ 6 N/ mm².

Waterproof membrane:

- Width:

2.0 m.

- Length of roll:

20 m (15 m for 1.8 mm thick membrane).

- Weight:

  • 1.2 mm thick: 1.50 kg/m².
  • 1.5 mm thick: 1.80 kg/m².
  • 1.8 mm thick: 2.00 kg/m².

Insulation:

  • Low thermal conductivity: 0.027 W/mK (thicknesses <80 mm), 0.026 W/mK (thicknesses from 80–120 mm) and 0.025 W/mK (thicknesses >120 mm).
  • Compressive strength >150 kPa at 10% deformation.
  • Typical Density of 32 kg/m³.
  • <5% smoke emission when tested to BS 5111-1.
  • CFC/ HCFC-free.
  • Zero ozone depletion potential (ODP).
  • Class O fire rating.

Vapour control layer:

- Material:

Bitumen with aluminium foil top side.

- Dimensions:

  • Thickness: 0.60 mm.
  • Width: 1.08 m.
  • Roll width: 1.08 m.
  • Roll length: 30 m.

- Weight:

0.7 kg/m².

- Colour:

Grey metallic.

- Performance:

Water vapour resistance: >9000 MNs/g.

Product Options

Waterproof membrane:

- Colour:

Available in standard colours. Other Colours may be available, subject to a lead time and minimum order quantities.

Accessories:

  • Double LT rainwater outlets: Insulated outlets.
  • Primer 501: Surface primer creating a key for Sarnaplast 2235.
  • Sarnafil T clean: Cleaning agent.
  • Sarnafil T prep: Seam preparation for use prior to hot-air welding.
  • Sarnametal T: Galvanized metal sheet with Sarnafil T factory laminated to it, for use in prefabricate flashings and drip details.
  • Sarnaplast 2235: Elastic one-part silicone sealant for sealing edges and perimeter upstand flashing terminations.
  • Sarnafil Primer 600: For use with Sarnavap 5000E SA VCL.
  • Sarnafil Spray Primer 610: Spray primer for use with Sarnavap 5000E SA VCL.
  • TG/TS rainwater outlets: Injection moulded FPO outlets and scuppers.

Third party certifications
Similar products from Sika Sarnafil