Compare

TaperedPlus's Tapered PIR TissueFaced Roof Insulation in conjunction with Unilin Insulation - Bespoke Tapered Insulation Board TR/MG

Name: TaperedPlus's Tapered PIR TissueFaced Roof Insulation in conjunction with Unilin Insulation - Bespoke Tapered Insulation Board TR/MG
Brand: TaperedPlus
SKU: r4EkCzHJs8dmRPcBgY4uKG

Verified by manufacturer 3 months ago

TaperedPlus

Third party certifications:

EPD
Certificate type
BES 6001
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
BBA Agrément Certificate
Certificate type

Bespoke PIR tapered roof insulation board for single ply fully adhered / partially bonded built-up felt flat roof insulation systems.

Jump to:

+44(0)1642 677342 Website

Application

Suitable for use below partially/ fully bonded roofing systems.
Suitable for fully bonding with approved adhesive systems.
Compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed boards.

Description

Bespoke PIR tapered roof insulation board for single ply fully adhered/ partially bonded built-up felt systems.

TaperedPlus provide a bespoke tapered insulation service.
Unilin Thin-R TR/MG is a high performance polyisocyanurate (PIR) with mineral coated glass facers suitable for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Part of a range of insulation solutions provided in conjunction with Unilin.

Features and benefits:

High performance rigid insulation.
Thermal conductivity as low as 0.024 W/m·K.
Practical solution to water ponding with insulation and drainage in a single system.
EPD certified by IGBC available from Unilin.

General information

Color	Yellow
Material	Polyisocyanurate (PIR)
Shape	Square
Length	1200 mm Guidance for specification option: Standard individual board length. Bespoke
Width	1200 mm Guidance for specification option: Standard individual board width. Bespoke
Height	Bespoke

Uniclass	Pr_25_71_63_66 Polyisocyanurate (PIR) foam boardsPrimary
CAWS	J42/10 Warm deck roof covering J42/420 Rigid urethane foam insulation

Specification data - Polyisocyanurate (PIR) foam boards

Standard	To BS EN 13165.
Third-party certification	British Board of Agrément (BBA)-certified 11/4878. Certified B Corp.
Fire performance	Euroclass E, Euroclass B S2 d0 on a steel deck.
Thermal conductivity (maximum)	0.024–0.027 W/m·K. Guidance for specification option: Consult manufacturer for details.
Water permeability	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Water vapour permeability	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Acoustic performance	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Compressive strength at 10% deformation	>150 kPa.
Cross section	Tapered.
Thickness (nominal)	Guidance for specification option: Insert requirements, minimum and maximum (refer to drawing or schedule as required; note that boards are 1200 x 1200 mm as standard). Standard thickness range is 30–400 mm.
Face size (length x width)	1200 x 1200 mm boards as standard.
Density	32 kg/m³.
Recycled content	0%.
Facing	Mineral coated glass facer to both sides. Guidance for specification option: Non-reversible.
Edges	Square.

Water vapour resistance	>344 MN·s/gm.
Fixing	Guidance for specification option: Insert requirements; insulation can be mechanically fixed or bonded to the substrate.

Sustainability data

Contains Red List materials	No
Country of material origin	United Kingdom
Country of product manufacture	United Kingdom
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	12.9 kg CO₂ eq/unit
Recyclability	0
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %