Application

It can be used for securing needle punched/ fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.It can also be applied to Stopgap smoothing underlayments, sound, smooth subfloors of concrete, granolithic, sand/ cement screeds and plywood.

Description

A single pack, fibre-reinforced moisture curing heavy duty flooring adhesive suitable for installing a wide range of floorcoverings and artificial grass. It is water resistant and suitable for outdoor use, however, it is not intended to be used as or as a substitute for a surface damp proof membrane. It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.

Preparation:

Subfloors must be sound, smooth, dry (<75% RH) and free from laitance and any contaminants which will affect adhesion. Styccoclean C140 should be used for removing grease, oil, polish, soap, etc. from non-absorbent substrates.

Concrete and sand/cement screeds must be fully cured and any laitance or surface treatments must be removed. The subfloor and ambient temperatures must be above 10°C. Underfloor heating must be off for at least 48 hours before, during and after application.

For application in external environments, although it is not necessary for subfloors to be totally dry, the surface must be visibly dry before the adhesive is applied.

Features and benefits:

  • Fibre-reinforced.
  • Secure floorcoverings from 90 minutes.
  • Weld from two hours.
  • High bond strength.
  • Isocyanate and solvent free.
  • Resistant to water, oil and grease when cured.
  • Suitable for outdoor use.

Application:

It can be used for securing needle punched/ fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.It can also be applied to Stopgap smoothing underlayments, sound, smooth subfloors of concrete, granolithic, sand/ cement screeds and plywood.

General information

Uniclass 2015

Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary

CAWS

M50/10 Resilient floor tiling

M50/110 Resilient floor tiling

M50/150 Sheeting

M50/170 Carpeting

M50/20 Sheeting

M50/25 Carpeting

Specification data - Acrylic and methacrylate adhesives

Product Reference

Styccobond F73 Plus

Product Options

Colour:

White.

Consistency:

Viscous liquid.

Coverage:

1.8–3.3 kg/m² dependent on application.

Open time:

20–30 minutes depending on temperature, humidity and absorbency of the subfloor.

Cure time:

  • Initial set from 90 minutes.
  • Full cure 24 hours.

Similar products from Ball, F and Co Ltd