NBS Source
List your products
Styccobond F48 Plus
Application

  • Suitable for securing a wide range of plasticized PVC floorcoverings in both sheet and tile form.
  • The product can be applied to structurally sound, smooth, dry subfloors of concrete and sand/ cement screed, STOPGAP smoothing underlayment, plywood and hardboard.
  • STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3 mm of the appropriate STOPGAP smoothing underlayment.
  • The manufacturer recommends using STOPGAP P131 primer on highly absorbent subfloors such as sand/ cement screeds and plywood etc., as they may cause rapid drying of the adhesive, thus reducing the open time. Dry and suitably prepared calcium sulfate screeds e.g. anhydrite must be primed with neat STOPGAP P121.

Description

A white fibre-reinforced, solvent free adhesive with high resistance to both heat and PVC plasticizers making it suitable for use in conservatories and areas where floor to ceiling windows are installed. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.

Features:

  • Fibre-reinforced.
  • High resistance to heat.
  • Fast drying, install floorcoverings within five minutes.
  • Excellent grab.
  • Solvent free.

Applications:

  • Suitable for securing a wide range of plasticized PVC floorcoverings in both sheet and tile form.
  • The product can be applied to structurally sound, smooth, dry subfloors of concrete and sand/ cement screed, STOPGAP smoothing underlayment, plywood and hardboard.
  • STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3 mm of the appropriate STOPGAP smoothing underlayment.
  • The manufacturer recommends using STOPGAP P131 primer on highly absorbent subfloors such as sand/ cement screeds and plywood etc., as they may cause rapid drying of the adhesive, thus reducing the open time. Dry and suitably prepared calcium sulfate screeds e.g. anhydrite must be primed with neat STOPGAP P121.

General information

Features

Fibre-reinforced

High resistance to heat

Fast drying, install floorcoverings within five minutes

Excellent grab

Solvent free

Uniclass 2015

Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary

CAWS

M50/10 Resilient floor tiling

M50/110 Resilient floor tiling

M50/150 Sheeting

M50/20 Sheeting

Specification data - Acrylic and methacrylate adhesives

Product Reference

Styccobond F48 Plus

Literature
Similar products from Ball, F and Co Ltd