Description

STYCCOBOND F47 is a solvent free acrylic polymer emulsion adhesive for securing sheet vinyl floorcoverings onto STOPGAP ISOLATOR MEMBRANE where the Relative Humidity of the subfloor does not exceed 92%.

The adhesive dries to a permanent tacky film, has excellent plasticiser resistance and is suitable for use over normal underfloor heating installations.

Where the Relative Humidity of the subfloor exceeds 92% or if mechanical fixings are to penetrate the adhesive film and membrane STYCCOBOND F84 should be used.

For details on other subfloors, contact our Technical Service Department.

Proper subfloor preparation is essential for the correct installation of any floor covering. The surface of the STOPGAP ISOLATOR MEMBRANE should be clean and dust free. Care should be taken to ensure no building dust or debris is on the surface prior to application of STYCCOBOND F47 as this may mirror through the floorcovering.

For detailed information, request the F. Ball Subfloor Preparation Guide.

General information

Uniclass 2015

Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary

CAWS

M50/150 Sheeting

M50/20 Sheeting

Specification data - Acrylic and methacrylate adhesives

Product Reference

Styccobond F47

Product Options

Technical properties:

  • Colour - Pale Blue.
  • Consistency - Viscous Liquid
  • Coverage Rates - 3m2 per litre with either a STYCCOBOND FINE NOTCH trowel or 5m2 per litre with 1.5mm x 5mm trowel
  • Drying Time - 60 minutes

Similar products from Ball, F and Co Ltd