NBS Source
List your products
Application

Suitable for regularly shaped rooms as the 0.5 m wide mats can be easily applied to walls or floors in parallel runs and securely fixed to the substrate with the self-adhesive mesh, making installation quick.

Description

Electric heating system for both wall and floor heating applications. Using it on walls means heating the bathroom is that much easier and eliminates the need for radiators for greater design freedom.

The mat has been specifically designed so that there is a continuous, 100% earth braid, making it fully compliant with the latest edition of the Wiring Regulations for wall heating applications, eliminating the need for a second earth screen during installation.

The pressure-sensitive adhesive on the mesh securely binds the mats to the substrate, keeping them flat and ensuring the application of tile adhesive is snag-free whilst allowing the mats to be easily repositioned as needed.

The ultra-thin, 1.8 mm multi-strand, dual-core heating cable, is double insulated with an advanced fluoropolymer making it exceptionally tough and easy to tile over. StickyMat 3D is available in 200 W/m² mats which ensures the quickest heating response time for your room.

System build-up:

- Wall construction:

  • Wall finish.
  • Flexible tile adhesive or plaster.
  • Warmup StickyMat 3D.
  • Warmup insulation board.
  • Flexible tile adhesive (solid walls). Screw and washer (stud walls).
  • Solid/ stud wall.

- Floor construction:

  • Floor finish.
  • Flexible tile adhesive or levelling compound.
  • Warmup StickyMat 3D.
  • Warmup insulation board.
  • Flexible tile adhesive.
  • Subfloor.

Features and benefits:

  • 200 W/m² mats for quickest heating response time.
  • Ultra-thin, 1.8 mm multi-strand, dual-core heating cable is double insulated with an advanced fluoropolymer making it exceptionally tough and easy to tile over.
  • 100% continuous earth braid, making it fully compliant with the latest edition of the Wiring Regulations for wall heating applications.
  • Eliminates condensation and mould growth in heated areas.
  • Suitable for regular shaped rooms, where the 0.5 m wide mats can be rolled out in parallel runs.
  • Pressure-sensitive adhesive securely binds the mats to the floor or wall keeping them flat for fast and secure installation.
  • BEAB Approved and CE marked meeting the highest safety standards for ultimate peace of mind.
  • Uses 4iE smart WIFI thermostat (see separate product).
  • Lifetime warranty and SafetyNet installation guarantee.

Applications:

Suitable for regularly shaped rooms as the 0.5 m wide mats can be easily applied to walls or floors in parallel runs and securely fixed to the substrate with the self-adhesive mesh, making installation quick.

General information
Specification data
Product Reference

StickyMat 3D™

Type

2SMFW 0.5

Heated area: 0.5 m².

2SMFW 1

Heated area: 1.0 m².

2SMFW 1.5

Heated area: 1.5 m².

2SMFW 2

Heated area: 2.0 m².

Insulation board

INSBOARD6MM

Thickness: 6 mm. R-value: 0.14 m²K/W.

INSBOARD(PK1)

Thickness: 10 mm. R-value: 0.25 m²K/W.

INSBOARD20MM

Thickness: 20 mm. R-value: 0.53 m²K/W.

INSBOARD30MM

Thickness: 30 mm. R-value: 0.81 m²K/W.

INSBOARD40MM

Thickness: 40 mm. R-value: 1.08 m²K/W.

INSBOARD50MM

Thickness: 50 mm. R-value: 1.36 m²K/W.

Standard product features

Technical characteristics:

  • Width: 500 mm.
  • Operating voltage 230 V AC: 50 Hz.
  • Earth protection: 100% earth braid coverage.
  • Cable thickness: 1.8 mm.
  • Heating cores: Multi-strand, dual-core.
  • Mat thickness: 3 mm.
  • Output rating: 200 W/m².
  • IP rating: IPX7.
  • Insulation: Ethylene tetrafluoroethylene (ETFE).
  • Installation temperature: -10°C (minimum).
  • Connection: 3 m long 'coldtail' connection.

Product Options

Type:

  • 2SMFW 0.5: Power: 100 W. Load: 0.43 A.
  • 2SMFW 1: Power: 200 W. Load: 0.87 A.
  • 2SMFW 1.5: Power:300 W. Load: 1.30 A.
  • 2SMFW 2: Power: 400 W. Load: 1.74 A.

Insulation boards:

  • Size (w x h): 600 x 1250 mm.
  • Warmup® Insulation Boards are water resistant, insulated tile backer board made of extruded polystyrene, faced on both sides with a fibreglass mesh embedded into a thin cement polymer mortar.
  • They have high thermal insulation properties for energy efficiency and an added benefit of sound absorption.
  • Warmup Insulation Boards have zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5.