NBS Source
Stair Rods And Fixing Eyes
Compare variants

Application

Solid brass stair rods with turned finials or ends are cut to the required sizes then machine-turned with choice of finial. These stair rods are supplied with two matching hinged fixing eyes per stair rod and designed to be fitted as a decorative finish to any stairs in both commercial and domestic applications.

Description

Stair Rods are made to customer supplied sizes and are hand lathe-turned prior to polishing and finishing. Rods over three metres in length are made in more than one piece with a joining detail. A range of diameters are available, plus 22 mm faced triangular rods.


Features and benefits:

  • A choice of finials are available on all rods (note that not all finials are available on all rods).
  •  All rods are supplied with two hinged fixing eyes per rod.
  • Plain fixing eyes are available to suit 12.5 mm diameter rods upon special request. 
  • Supplied in sizes to suit rod diameters or triangular.

General information

Color

Bronze

Finish

Chrome

Material

Brass

Grade H/H CZ108 BS EN 12164:2016.

Length

Bespoke

Cut to customer sizes.

Uniclass

Pr_35_90_31_84 Stair trimsPrimary

CAWS

null Brass

N14/330 Brass

M50/75 Stair nosings and trims

M50/750 Stair nosings and trims

Specification data - Stair trims

Material

Solid Brass.

Colour

Please refer to the C.A.T. product catalogue for details of which finishes are available on which diameter of rods/triangular rods.

Polished brass.

Satin brass.

Antique brass.

Antique bronze.

Chrome.

Satin chrome.

Nickel.

Satin nickel.

Diameter

10 mm.

12.5 mm.

16 mm.

19 mm.

Fixing

Hinged fixing eyes / mechanical.

Standards

To BS EN 12164:2016.

Handling

Use gloves when handling.

Do not handle with bare hands are sweat will cause rapid tarnishing of the finish.

Installation

  • Fix eyes into tread riser directly alongside the edge of the carpet runner leaving a gap of approximately 3mm (1/8").
  • For concrete stairs use rawl plugs for screw fixings.
  • When fixing to timber stair, direct screw into tread and riser. Note, if wood is particularly hard, it may be required to pilot drill before fixing with screws.
  • Stair rods are for aesthetic purposes only. Always use wooden gripper to fully secure carpet on stairs.

-

Dimensions

Triangular rod dimensions.

22 x 22 x 22 mm.

Environmental information

Country of product manufacture

United Kingdom

Literature

Stair Rods and Eyes

Stair Rods and Eyes

Similar products from CAT (Carpet Accessory Trims) Limited

Aluminium LVT Stair Edge Profiles

Aluminium LVT Stair Edge Profiles

Brass LVT Stair Edge Profiles

Brass LVT Stair Edge Profiles