NBS Source
I'm a manufacturer
Compare variants

SPW600e Tilt/Turn Window

Verified by manufacturer 3 months ago

SPW600e Tilt/ Turn Window System [Wall Placement]

Senior Architectural Systems Ltd Variant:

A three chamber aluminium, 75 mm polyamide tilt/ turn window system that achieves impressive thermal performance.

Jump to:
BOS
+44 (0)1709 772600 Website

Application

Suitable for educational, commercial and retail applications, transport terminals, health service buildings.

Description

Three chamber 75 mm polyamide window system which achieved good thermal performance. An enhancement to the SPW 600 Suite of windows which introduces a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit (IGU) ensure the window exceeds the rigorous standards set in the Building Regulation (E&W) Approved Document L.


Performance:

  • Air permeability: 600 Pa.
  • Watertightness: 600 Pa.
  • Wind resistance: 2400 Pa.
  • Carries a Window Energy Rating (WER) of A–C.


Size limitations:

  • Vent height: 520–2400 mm.
  • Vent width: 465–1500 mm.
  • Maximum weight: 130 kg/ 150 kg.


Features and benefits:

  • Includes a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit.
  • Polyamide thermal barriers are manufactured in accordance with PA66 GF25.
  • Gaskets are manufactured in accordance with BS 3734.


Construction:

Constructed with mitred and mechanically crimped or joined corners, with support chevrons and cleats to ensure accurate alignment. Integral transoms and mullions are fixed into the outer frames with screws or brackets. Joints are sealed against water ingress during assembly. Opening lights are inserted directly into the outer frames on butt hinges or friction stays. Vent frames can be fixed directly into the framing modules. Individual modules can be fully assembled and then transported to site. The windows incorporate an integral polyamide thermal break.

General information

Finish

Anodized

Guidance for specification option:

Insert colour requirements, 25 microns (minimum), satin or polished finish available.

Powder-coated

Material

Aluminium

Guidance for specification option:

Extruded aluminium: Aluminium alloy 6063.T6 to BS EN 755-9.

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_30_59_98_02 Aluminium window unitsPrimary

CAWS

H11/137 Windows/ opening lights

L10/330 Aluminium windows

L10/25 Aluminium windows

Product range

SPW600e Window System

Specification data - Aluminium window units

Standard

To BS 3734, B S6375-1:2015, BS 6375-2:2009 & PAS24:2016.

Third-party certification

Third-party-accredited by a UKAS-approved or recognized body.

Dimensions and configurations

As drawing.

Guidance for specification option:

Insert reference.

As schedule.

Guidance for specification option:

Insert reference.

Product performance

-

Weather performance

-

UK exposure category

2400 Pa.

Air permeability

600 Pa (Class C).

Watertightness

600 Pa.

Resistance to wind load

2400 Pa.

Durability

-

Operation and strength characteristics

Tested to BS 6375-2:2009.

Safety

-

Security level

Tested to PAS 24:2016 Enhanced Security.

Thermal

-

Whole window U-value

-

Manufacturer guidance

Separate figures are available for Thermal U-values depending on type of window configuration, frame and glazing material, consult manufacturer for details.

British Fenestration Rating Council Window Energy Rating

A–C.

Frame

-

Finish as delivered

-

Coating

Anodized.

Guidance for specification option:

Insert colour requirements, 25 microns (minimum), satin or polished finish available.

Polyester powder coated.

Guidance for specification option:

Insert colour requirements, 40 microns standard and 60 microns available for marine environments.

Colour

-

Manufacturer guidance

Polyester powder coated available in single or dual colour. Consult manufacturer for availability of colours and samples.

Glazing or infill

-

Requirements

Insulated glass unit, inside glazed.

Guidance for specification option:

As standard. Insert thickness required, 28–50 mm available.

Insulated glass unit, outside glazed.

Guidance for specification option:

Insert thickness required, 28–50 mm available.

Manufacturer guidance

28 mm double glazed can be used as standard, but other unit sizes up to 50 mm are possible depending on weight.

Type

Tilt/ turn.

Turn only.

French casement.

Turn only French casement.

Ironmongery/ Accessories

Manufacturer's standard.

Non-locking handle.

Locking handle.

PlacementType

Wall placement.

Sustainability data

Country of product manufacture

United Kingdom

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

4

IFC

IFC2X3

3

Literature

SPW600e Inward Opening Technical Datasheet

SPW600e Inward Opening Technical Datasheet

Introduction to Senior Architectural Systems Brochure

Introduction to Senior Architectural Systems Brochure

SAS BREEAM Brochure

SAS BREEAM Brochure

SAS CPD Seminars 2023

SAS CPD Seminars 2023

SAS Featured Projects Brochure

SAS Featured Projects Brochure

SAS Accommodation Brochure

SAS Accommodation Brochure

SAS Commercial Brochure

SAS Commercial Brochure

SAS Education Brochure

SAS Education Brochure

Similar products from Senior Architectural Systems Ltd

Ali VU Casement Window

Ali VU Casement Window

PURe® Casement Window

PURe® Casement Window

PURe® Overswing Window

PURe® Overswing Window

PURe® Parallel Push Window

PURe® Parallel Push Window

PURe® Slide Window

PURe® Slide Window

PURe® Tilt/Turn Window

PURe® Tilt/Turn Window

SFF Frameless Window  - Flush Aluminum Window System

SFF Frameless Window - Flush Aluminum Window System

SPW600e Casement Window

SPW600e Casement Window

SPW600e Overswing Window

SPW600e Overswing Window

SSG Secondary Glazing System - Secondary Glazing

SSG Secondary Glazing System - Secondary Glazing