This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more

NBS Source

Sopro RAP 2 434 Renovation and Levelling Render

SMET Building Products Ltd Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

Sag-resistant, rapid-set cementitious render.

Jump to:
+44 (0)28 3026 6833 Website

Application

Wall surfaces in concrete, aerated concrete, pumice, clay, calcium-silicate and composite masonry applications. For the subsequent installation of ceramic, natural stone and cast stone coverings. Suitable for use in damp and wet spaces.

  • For indoor and outdoor use.
  • For wall surfaces and ceilings.
  • Renovation and refurbishment.


Recommended sealants:

  • With Sopro PU-FD surface sealant or Sopro FDF flexible sealing compound: Ready for covering/ subsequent works after 24 hours (approximately, prior to waterproofing).
  • With Sopro cementitious sealing slurries: Ready for covering/ subsequent works after 6–8 hours (prior to waterproofing).

Description

A sag-resistant, rapid-set cementitious render designed for manual and machine application to mineral substrates, both indoors and outdoors. Manufactured in accordance with EN 998-1.


Used for rendering, patching and smoothing wall surfaces. It is manufactured from Portland cement-based premixed dry mortar and general-purpose (GP) rendering mortar of strength class CS IV, containing selected mineral aggregate and special polymers.


Features and benefits:

  • High crystalline water binding properties.
  • Good workability and adhesion.
  • Allows early installation of coverings.
  • Ready to receive ceramic covering after six hours.
  • High sag resistance due to fibre reinforcement.
  • Maturing time: 3–5 minutes.
  • Low-chromate to Regulation (EC) No 1907/ 2006, Annex XVII.
  • CE marked.

General information

Uniclass

Pr_35_31_64_12 Cementitious rendersPrimary

CAWS

M20/160 Proprietary cement gauged render

M20/19 Proprietary cement gauged render

Product range

Renders

Specification data - Cementitious renders

Coating

Thickness

Single operation: 2–20 mm; Small area operation: Up to 40 mm.

Application temperature

5–25°C (substrate, air, material). Ideally, 23°C at 50% relative humidity.

CoverageArea

1.6 kg/m² per mm coat thickness (approximately).

StrengthClass

CS IV.

Reaction to fire class

Class A1, non-combustible.

Water absorption

W2.

Water vapour permeability

µ ≤ 76.

Adhesion strength

≥1.5 N/mm².

ThermalConductivity

0.61 W/mK tabulated mean.

Literature

Sopro RAP 2 - 434 - Renovation and Levelling Render

Sopro RAP 2 - 434 - Renovation and Levelling Render

Third party certifications

BSI Kitemark

BSI Kitemark

BSI Certificate of Registration ISO 14001:2015

BSI Kitemark

BSI Kitemark

BSI Certificate of Registration ISO 45001:2018

BSI Kitemark

BSI Kitemark

BSI Certificate of Registration ISO 9001:2015

Similar products from SMET Building Products Ltd

CASEA Mineral Finish Coat K - Finish Coat Render

CASEA Mineral Finish Coat K - Finish Coat Render