NBS Source
List your products

This product is no longer available

Sopro HF-S 563 High-Strength Floor Levelling Compound

SMET Building Products Ltd

Sopro HF-S 563 high-strength floor levelling compound is a heavy duty, pumpable, rapid-set, cementitious floor levelling compound for creation of smooth, unbroken surfaces in residential, commercial and industrial facilities.

Jump to:
+44 (0)28 3026 6833 www.smetbuildingproducts.com
Application

  • Cement screeds.
  • Concrete and untreated concrete surfaces (three months old minimum.).
  • Existing ceramic and terrazzo coverings.
  • Magnesium oxychloride (magnesite) screeds.
  • Board subfloors.

Description

Sopro HF-S 563 floor levelling compound is designed for the creation of smooth, unbroken, finished floor surfaces both indoors and outdoors, e. g. in workshops, factory halls, storerooms, garages, cellars etc. For finished surfaces outdoors, it is only suitable when used in conjunction with SoproDur HF-L 513 protective coat and silica sand (for adequate slip resistance).

Patch holes, chips and spalls with Sopro RS 462 repair filler or Sopro SP 770 rapid-set filler. Fill any existing cracks in screed with structurally bonding Sopro GH 564 casting resin.

Sopro AFS 561 anhydrite floor-levelling compound is recommended for calcium sulfate-based and mastic asphalt screeds.

Features and Benefits:

  • Heavy-duty.
  • Self-levelling.
  • Rapid-set.
  • Pumpable.
  • GEV EMICODE system: EC1PLUS (very-low-emission-plus) rating.
  • Suitable for floor heating systems.
  • CE Marked
  • Low-chromate to Regulation 1907/2006 EC, Annex XVII. systems.

Applications:

  • Cement screeds.
  • Concrete and untreated concrete surfaces (three months old minimum.).
  • Existing ceramic and terrazzo coverings.
  • Magnesium oxychloride (magnesite) screeds.
  • Board subfloors.

Suitable primer:

  • Sopro GD 749 primer: all mineral, high- or variable-suction substrates, e. g. cement screeds, concrete and untreated concrete surfaces (three months old, minimum). Sopro GD 749 primer should be applied in undiluted form.
  • Sopro HE 449 bonding emulsion: for wet-on-wet application after a short evaporation time of 10 – 15 minutes (30 minutes, maximum). No liquid Sopro HE 449 should remain on the surface. Any dried films should be removed. Suitable substrates: cement screeds, untreated concrete surfaces (minimum three months old); existing ceramic, terrazzo, natural and cast stone coverings; existing firmly adhering screed coatings.
  • Sopro HPS 673 special primer: all smooth, non-absorbent substrates, e. g. existing ceramic, terrazzo, natural and cast stone coverings, or firmly adhering adhesive residue.
  • Sopro MGR 637 multi-purpose primer: for moisture-sensitive substrates, e. g. magnesium oxychloride (magnesite) screeds, calcium sulfate-based (anhydrite and anhydrite self-levelling) screeds.

General information
Specification data - Smoothing and levelling underlay compounds
Product Reference

Sopro HF-S 563 High-Strength Floor Levelling Compound

Thickness

4–40 mm for thickness upwards of 10 mm, up to 1/3 of the prepared compound volume may be extended using 0–4 mm or 0–8 mm graded silica sand.

Standard product features

Compressive strength:

40 N/mm² (approximately) after 28 days.

Flexural tensile strength:

10 N/mm² (approximately) after 28 days.

Similar products from SMET Building Products Ltd