Sopro FF 450 Flexible Tile Adhesive

Application

  • Wall and floor tile products: Earthenware, stoneware and fully vitrified stoneware tiles, clinker floor tiles, mosaic, discoloration-resistant natural stone units and cast stone units.
  • For residential, commercial and industrial facilities.
  • Damp and wet spaces, swimming pools, process water containers, operating theatres, escape routes, facades, balconies and patios.
  • For indoor and outdoor use.


Suitable substrates:

  • Concrete and lightweight concrete.
  • Cement screeds.
  • Calcium sulphate (anhydrite and self-levelling anhydrite) screeds.
  • Mastic asphalt screeds (indoors).
  • Board subfloors.
  • Heated wall and floor constructions (cement and calcium sulphate screeds).
  • Strong existing ceramic, natural stone, terrazzo or cast stone coverings.
  • Paperless gypsum panels.
  • Gypsum plasterboard and gypsum fibreboard.
  • Flush-jointed masonry (no composite masonry).
  • Renders made from masonry cement.
  • Cement render or lime/ cement render.
  • Rigid foam board.
  • Waterproof membranes (using Sopro FDF flexible sealing compound, Sopro DSF 523 one-component flexible sealing slurry, Sopro DSF 623 one-component flexible rapid-set sealing slurry, Sopro DSF 423 two-component flexible sealing slurry or Sopro TDS 823 two-component turbo sealing slurry).

Priming:

Manufacturer recommends the use of:

Sopro GD 749 primer:

For use on calcium sulfate (anhydrite and self-levelling anhydrite) screeds to receive tiles with edge length not exceeding 60 cm and of size not exceeding 0.2 m², paperless gypsum wall panels, gypsum plasterboard/ joints and filler, gypsum fibreboard, gypsum plaster, high-or variable-suction (interior) aerated concrete; lime/ cement render, renders made from masonry cement, flush-jointed masonry.

Sopro HPS 673 bonding primer:

For use on smooth and closed-pore substrates, e.g., existing tile, terrazzo, natural and cast stone coverings; adhesive residue from PVC flooring or carpeting; mastic asphalt screeds without sand blinding.

Sopro MGR 637 multi-purpose primer/ Sopro EPG 522 epoxy primer:

For use on calcium sulfate based (anhydrite and self-levelling anhydrite) screeds to receive tiles with edge length exceeding 60 cm or of size exceeding 0.2 m².

Use of a rapid-set Sopro thin-bed adhesive is recommended for external areas during cold conditions.


Description

Cementitious, flexible tile adhesive for the installation of ceramic wall and floor coverings and discoloration-resistant natural stone tiles. This tile adhesive meets C2 TE S1 requirements to DIN EN 12 004, and offers good workability and high sag resistance. Suitable for use in conjunction with floor heating, flexible brush-on waterproof coatings and fully vitrified stoneware. Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.


Features and benefits:

  • Flexible.
  • High sag resistance due to fibre reinforcement.
  • Extended open time.
  • High coverage.
  • EMICODE system of GEV (German Association for Control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating.
  • DGNB (German Sustainable Building Council): Top quality level 4.
  • CE marked.


General information

Uniclass 2015

Pr_20_31_02_12 Cementitious adhesivesPrimary

CAWS

M40/10 Natural stone covering to

M40/110 Tiling to

M40/115 Natural stone covering to

M40/120 Mosaic to

M40/5 Tiling to

Product range

Adhesives and Sealants

Specification data - Cementitious adhesives Enhanced data

Deformation capability

≥2.5 mm.

Adhesive thickness

5 mm in compacted adhesive bed (maximum).

Application temperature

5–30°C (maximum).

Coverage

1.1 kg/m² per mm coat thickness (approximately).

Drying time

(Walkable/ grout-able)

After 12 hours (approximately).

Loading

In commercial facilities: After three days (approximately). In areas subject to high wet exposure and areas with wall and floor heating: After 14 days (approximately). For underwater applications: After 28 days (approximately).

Tensile Adhesion

(Strength after dry, water, heat storage and freeze-thaw cycles)

1.0 N/mm².

Similar products from SMET Building Products Ltd

Sopro AHK 560 CA - Tile Adhesive

Sopro AHK 560 CA - Tile Adhesive

Sopro FKM XL 444 Extra Lightweight Tile Adhesive

Sopro FKM XL 444 Extra Lightweight Tile Adhesive

Sopro FKM® Silver 600 Extra Rapid Tile Adhesive

Sopro FKM® Silver 600 Extra Rapid Tile Adhesive

Sopro MDM 888 - Medium/ Thick Bed Tile Adhesive

Sopro MDM 888 - Medium/ Thick Bed Tile Adhesive

Sopro SC 809 Classic White Tile Adhesive

Sopro SC 809 Classic White Tile Adhesive

Sopro VF 419 - VarioFlex® Silver Large-Format Flexible Tile Adhesive

Sopro VF 419 - VarioFlex® Silver Large-Format Flexible Tile Adhesive

Sopro VF HF 420 - VarioFlex® High Strength Flexible Tile Adhesive

Sopro VF HF 420 - VarioFlex® High Strength Flexible Tile Adhesive

Sopro's No.1 Flexible Tile Adhesive

Sopro's No.1 Flexible Tile Adhesive