Sopralene Flam 180 TF

Sopralene Flam 180 TF

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Soprema UK

Styrene-butadiene-styrene (SBS) modified bitumen under layer membrane with 180 g/m² polyester reinforcement.

Jump to:
+44 (0)330 058 0668 www.soprema.co.uk
Application

For use as an upper layer under ballast within a single or multi-layer waterproofing system, or as an under layer within a multi-layer waterproofing system.

Description

Membrane composed of styrene-butadiene-styrene (SBS) modified bitumen with polyester reinforcement. The upper surface is finished with sand/ talcum and the lower surface is protected by a thermofusible film.

Features and benefits:

  • Fully bonded underlayer - torch-on or hot-air method including the overlaps.
  • Flexible until -20°C.
  • CE marked to BS EN 13707.

Applications:

For use as an upper layer under ballast within a single or multi-layer waterproofing system, or as an under layer within a multi-layer waterproofing system.

General information

Finish

Upper side: Sand/ talcum

Lower side: Thermofusible film

Material

SBS (styrene-butadiene-styrene) modified bitumen with 180 g/m² non-woven polyester reinforcement

Uniclass 2015

Pr_25_57_08_75 Reinforced bitumen roofing sheetsPrimary

CAWS

J41/10 Built-up reinforced bitumen membrane warm deck roof covering

J41/110 Built-up reinforced bitumen membrane warm deck roof covering

J41/115 Single layer reinforced bitumen membrane warm deck roof covering

J41/12 Built-up reinforced bitumen membrane cold deck roof covering

J41/120 Built-up reinforced bitumen membrane inverted roof covering

Show more
Specification data - Reinforced bitumen roofing sheets

Product Reference

Sopralene Flam 180 TF

Standard product features

Material:

SBS (styrene-butadiene-styrene) modified bitumen with 180 g/m² non-woven polyester reinforcement.

Finish:

  • Upper side: Sand/ talcum.
  • Lower side: Thermofusible film.

Colour:

Black.

Roll size (w x l):

1 x 8 m.

Thickness:

4 mm.

Technical properties:

  • Tensile force (to BS EN 12311-1): Longitudinal: 850 N/ 50 mm; transverse: 650 N/ 50 mm.
  • Elongation at maximum tensile force (to BS EN 12311-1): 45%.
  • Dimensional stability (to BS EN 1107-1): 0.5%.
  • Resistance to tearing (nail shank, to BS EN 12310-1): 175 N.
  • Flexibility at low temperature (to BS EN 1109): -20°C.
  • Flow resistance at elevated temperature (to BS EN 1110): 110°C.

Third party certifications

Additional certifications:

  • DoP: Certificate: WPBBE0318
Similar products from Soprema UK