Sprayed and trowelled flat finish with attractive lightly pitted surface.
Acoustic plaster ideal for noise reverberation control in offices, homes, swimming pools, public places, classrooms, restaurants etc.
Please note that it is important not to use moisture resistant plasterboard as this can cause staining of wet applied products. Oil based stain barrier paints can be used to prevent this. Please consult Oscar Acoustics for more information.
A minimum of 12.5 mm thick plasterboard, installed to British Gypsum specification should be used.
Acoustic spray application by Oscar Acoustics trained in-house teams. Consult Oscar Acoustics for relevant acoustic plaster preparation details.
Sprayed and trowelled, flat acoustic plaster finish with an attractive, lightly pitted, seamless surface for noise reverberation control.
A flat, very lightly pitted surface coating. Naturally safe, recycled cellulose fibre, with low embodied energy. Can be disposed of as non-hazardous waste. Acoustic plaster can be applied directly onto plasterboard, smooth concrete, steel sheet and most other surfaces. Suitable for flat, domed and vaulted soffits.
An excellent alternative to acoustic panel ceilings without design compromise.
Features and benefits:
B-s1,d0 & Class 0 to BS476 - significantly betters the requirements of the new Approved Document B providing little to no smoke and absolutely no droplets, assisting in the safe escape of occupants.
90% of flangeless fittings do not work properly with any acoustic finish. If you are specifying a flangless fitting, please contact Oscar Acoustics for advice.
Acoustic testing has been carried out against concrete. Substrates likely to provide increased performance include plasterboard with the use of an air gap behind, rib deck or profiled metal sheet. Please contact Oscar Acoustics’ technical department for free design assistance.
Recycled high grade.
In accordance with OEL3 Oscar pre-start check list.
Water based adhesives.
R 0.03 per mm (W/m·K).
Bespoke access hatches.
Oscar Evo-Blade razor edge trim.
Recessed light Halos (flanged fitting only).
For downlighters, etc. Can be specially manufactured by Oscar for each project.
SonaSpray fcx trowel finish
SonaSpray fcx lightly stippled finish
Held in stock.
Bespoke colours are available, minimum quantities apply.
Sound absorption coefficient
To BS EN ISO 354 at 125 Hz: 0.05, at 250 Hz: 0.10, at 500 Hz: 0.40, at 1 kHz: 0.70, at 2 kHz: 0.85, at 4 kHz: 0.90.
To BS EN ISO 354 at 125 Hz: 0.10, at 250 Hz: 0.25, at 500 Hz: 0.60, at 1 kHz: 0.75, at 2 kHz: 0.85, at 4 kHz: 0.70.
To BS EN ISO 354 at 125 Hz: 0.05, at 250 Hz: 0.15, at 500 Hz: 0.50, at 1 kHz: 0.90, at 2 kHz: 1.00, at 4 kHz: 1.00.
To BS EN ISO 354 at 125 Hz: 0.15, at 250 Hz: 0.45, at 500 Hz: 0.80, at 1 kHz: 0.85, at 2 kHz: 0.85, at 4 kHz: 0.95.
Noise reduction coefficient
Weighted sound absorption coefficient
Country of material origin
Country of product manufacture
SonaSpray fibres are made up of minimum 80% post-consumer recycled high grade paper.
Warringtonfire: Method of test for Fire propagation for products - BS 476 Part 6: 1989 A1: 2009
Warringtonfire: Method for classification of the surface spread of flame of products - BS 476 Part 7: 1997
Warringtonfire: Classification of reaction to fire performance - 13501-1:2007+A1: 2009
Warringtonfire: Classification of reaction to fire performance - EN 13501-1:2007 A1: 2009
Warringtonfire: Compliance with the requirements for A class 0 surface - Class 0 Summary Report