Adjustable aluminium louvre solar shading.
Vertical or inclined panel, aerofoil or box section blade, adjustable-angle aluminium louvre solar shading.
Features:
Size | Insert requirement or 'As Drawing'. |
Finish | Anodized 20 µ. Polyester powder coating, RAL Insert colour requirement, 60–80 µ. Polyester powder coating, Syntha Pulvin Insert colour requirement, 60–80 µ. |
Features | Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications Choice of mounting and angle Choice of blade, centres and orientation Blades can be matched to Icarus fixed louvre units, to Icarus Patio and to Loggia sliding units |
Material | Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy End plates: Aluminium alloy (AlMg3) Axles: Stainless steel mounted centrally in aluminium end caps Bearings and locking rings: UV-resistant synthetic material Screws and fasteners: Stainless steel sheet-metal, galvanized and powder coated |
Uniclass 2015 | |
CAWS | L10/59 Solar shading system L10/670 Brises soleil |
Product Reference | Solar Shading Elliptical Icarus® Vertical Movable |
Size | Insert requirement or 'As Drawing'. |
Type | Adjustable horizontal bladesBlades pivoted to side support profiles, adjustable through 90º. Adjustable vertical bladesBlades pivoted to top and bottom support profiles, adjustable through 90º. |
Support profiles | AluminiumGalvanized steel |
Blades | ICA.100Aerofoil, 100 mm section width. ICA.125Aerofoil, 125 mm section width. ICA.150Aerofoil, 150 mm section width. ICA.200Aerofoil, 200 mm section width. ICA.250Aerofoil, 250 mm section width. ICA.300Aerofoil, 300 mm section width. ICA.360Aerofoil, 360 mm section width. ICA.400Aerofoil, 400 mm section width. ICA.480Aerofoil, 480 mm section width. ICL.200Aerofoil/ block, 200 mm section width. ICP.150Block, 150 x 30 mm (w x d) section. ICP.200/30Block, 200 x 30 mm (w x d) section. ICP.200/40Block, 200 x 40 mm (w x d) section. |
Operation | Not requiredElectric, type 100Tube motor. Length between fixing points: 530 mm. Electric, type 200Tube motor. Length between fixing points: 630 mm. Manual, directKnob mounted on transmission bar. Manual, cableWith remote winding handle. Length (maximum): 5 m. Submit proposal |
Finish | Anodized20 µ. Polyester powder coating, RALInsert colour requirement, 60–80 µ. Polyester powder coating, Syntha PulvinInsert colour requirement, 60–80 µ. |
Standard product features | Material:
|
Product Options | Brackets: Renson type: Suitable for direct mounting to brickwork or structural steel. Minimum width 60 mm. Support profiles: Aluminium or galvanized steel, according to protrusion, blade weight, and wind and snow load. Contact manufacturer for more information. Blades: Indicative maximum spans for typical wind pressures:
Finish (aluminium components): Other anodized or polyester powder coating finishes may be available to special order. |
Solar Shading Brise Soleil Sunclips® Horizontal Above
Solar Shading Brise Soleil Sunclips® Horizontal Below
Solar Shading Brise Soleil Sunclips® Horizontal Cassettes
Solar Shading Brise Soleil Sunclips® Horizontal Curved
Solar Shading Brise Soleil Sunclips® Vertical Cassettes
Solar Shading Brise Soleil Sunclips® Vertical on Mullions
Solar Shading Elliptical Icarus® Horizontal Cassettes
Solar Shading Elliptical Icarus® Horizontal Fixed
Solar Shading Elliptical Icarus® Horizontal Movable
Solar Shading Elliptical Icarus® Horizontal Quickfix®