Adjustable blade, aluminium louvre, solar shading.
Horizontal or inclined panel, aerofoil or box section blade, adjustable angle aluminium louvre solar shading.
Features:
Finish | Anodized 20 µ. Polyester powder coating, RAL Insert colour requirement, 60–80 µ. Polyester powder coating, Syntha Pulvin Insert colour requirement, 60–80 µ. |
Material | Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy End plates: Aluminium alloy (AlMg3) Pivot sleeves: Stainless steel, mounted centrally in aluminium end caps Bearings and circlips: UV-resistant synthetic material Screws and fasteners: Stainless steel sheet-metal |
Size | Insert requirement or 'As Drawing'. |
Uniclass | |
CAWS | L10/59 Solar shading system L10/670 Brises-soleil |
Product range |
Product Reference | Solar Shading Elliptical Icarus® Horizontal Movable |
Size | Insert requirement or 'As Drawing'. |
Support profiles | AluminiumGalvanized steel |
Blades | ICA.100Aerofoil, 100 mm section width. ICA.125Aerofoil, 125 mm section width. ICA.150Aerofoil, 150 mm section width. ICA.200Aerofoil, 200 mm section width. ICA.250Aerofoil, 250 mm section width. ICA.300Aerofoil, 300 mm section width. ICA.360Aerofoil, 360 mm section width. ICA.400Aerofoil, 400 mm section width. ICA.480Aerofoil, 480 mm section width. ICL.200Aerofoil/ block, 200 mm section width. ICP.150Block, 150 x 30 mm (w x d) section. ICP.200/30Block, 200 x 30 mm (w x d) section. ICP.200/40Block, 200 x 40 mm (w x d) section. |
Operation | Electric, type 100Tube motor. Length between fixing points: 530 mm. Electric, type 200Tube motor. Length between fixing points: 630 mm. Manual, directKnob mounted on transmission bar. Manual, cableWith remote winding handle. Length (maximum): 5 m. Submit proposal |
Finish | Anodized20 µ. Polyester powder coating, RALInsert colour requirement, 60–80 µ. Polyester powder coating, Syntha PulvinInsert colour requirement, 60–80 µ. |
Standard product features | Material:
Fixing: The support profiles are attached directly to RENSON® brackets. |
Product Options | Brackets: Aluminium or galvanized steel, according to overhang, blade weight, and wind and snow load. Contact manufacturer for more information. Blades: Indicative maximum spans for typical wind pressures:
Finish: Other anodized or polyester powder coating finishes may be available to special order. |
Solar Shading Brise Soleil Sunclips® Horizontal Above
Solar Shading Brise Soleil Sunclips® Horizontal Below
Solar Shading Brise Soleil Sunclips® Horizontal Cassettes
Solar Shading Brise Soleil Sunclips® Horizontal Curved
Solar Shading Brise Soleil Sunclips® Vertical Cassettes
Solar Shading Brise Soleil Sunclips® Vertical on Mullions
Solar Shading Elliptical Icarus® Horizontal Cassettes
Solar Shading Elliptical Icarus® Horizontal Fixed
Solar Shading Elliptical Icarus® Horizontal Quickfix®
Solar Shading Elliptical Icarus® Vertical Cassettes