NBS Source
List your products
Description

Sliding rooflight with one section sliding over another fixed section, creating a 50% clear opening. All the glass is flush to allow water runoff and easy cleaning. The thermally broken frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation. Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails.

All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day.

The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically. The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.

General information
Size

As drawing

As schedule

Color

Grey/white frame, clear glass

Features

50% clear opening, manual override as standard, thermally broken frame, minimal footprint on roof

Material

Aluminium, glass

Shape

Rectangular

WarrantyDescription

Manufacturer's warranty

Uniclass 2015 Framed rooflights (Pr_30_59_72_31)
Specification data
Product Reference

GV Sliding Over Fixed Rooflight

Size

As drawing

As schedule

Colour/ Finish

Qualicoat approved polyester powder coated, RAL

RAL 7015 as standard. Other colours are available to special order; consult manufacturer and insert requirements.

Kerb -
Height

Insert requirement, 150 mm minimum.

Thickness

Insert requirements, dependent upon rooflight section; consult manufacturer's literature for more information.

Glazing

Double glazed

Triple glazed

Accessories

None

BMS Integration

Rain sensor

Rain sensor overrides

Insert requirements.

Remote control

Ritec glass coating

Solenoid bolt

Thermostat

Standard product features

Frame material:

Extruded thermally broken aluminium profiles, grade 6063 T6.

Power supply:

24 V battery operated, 240 V mains supply required for trickle charging batteries via control board.

Drive mechanism:

Belt driven.

Seals:

Combination of EPDM rubber seals and brush strip.

Security:

Anti-lifting mechanism to prevent lifting of sliding frame in windy conditions.

Rooflight control:

OR Control Board and magnetic limit switches.

Product Options

Glazing:

- Double glazed:

  • Outer: 6 mm clear toughened heat soak tested.
  • Spacer: 16 mm black silicone sealed argon filled cavity.
  • Inner: 6 mm clear soft low E toughened heat soak tested.

- Triple glazed:

  • Outer: 6 mm clear toughened heat soak tested.
  • Spacer: 16 mm black silicone sealed argon filled cavity.
  • Middle: 6 mm clear soft low E toughened heat soak tested.
  • Spacer: 16 mm black silicone sealed argon filled cavity.
  • Inner: 6 mm clear soft low E toughened heat soak tested.

Accessories:

  • Rain Sensor.
  • Remote control.
  • Solenoid bolts.
  • Proximity sensors.
  • Rain sensor over-ride.
  • BMS interface.
  • Thermostat control.

- Ritec glass coating:

Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.

Digital objects
PlatformCompatibleVersionCertified to
IFC
IFC2X3 1 1.3
IFC
IFC2X3 1 1.3
Revit
Revit 2016 2 2.0
Download now from NBS National BIM Library
Third party certifications
  • ISO9001. : Compliant company
  • ISO14001. : Compliant company