Sliding Over Fixed Rooflight

Sliding rooflight with one section sliding over another fixed section, creating a 50% clear opening.

Feature and Benefits:

• Drive mechanism: Belt driven.
• Visual quality of glass: To the Hadamar standard.
• All the glass is flush to allow water runoff and easy cleaning.
• The thermally broken frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation.
• Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails.
• Low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard.
• Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day.
• The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client.
• It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically.
• The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.
• Electronics EMC tested and certificated.
• National Association of Rooflight Manufacturers (NARM): Members.
• Loss Prevention Certification Board (LPCB): certificated product.
• Qualicoat: approved applicator.
• To ISO 9001, ISO 14001 and LPS 2081.