Thermally broken sliding rooflight with one fixed and one sliding component.
Sliding rooflight with one section sliding over another fixed section, creating a 50% clear opening. All the glass is flush to allow water runoff and easy cleaning. The thermally broken frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation. Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails.
All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day.
The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically. The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.
Grey/white frame, clear glass
50% clear opening, manual override as standard, thermally broken frame, minimal footprint on roof
|Uniclass 2015||Framed rooflights (Pr_30_59_72_31)|
GV Sliding Over Fixed Rooflight
Qualicoat approved polyester powder coated, RAL
RAL 7015 as standard. Other colours are available to special order; consult manufacturer and insert requirements.
Insert requirement, 150 mm minimum.
Insert requirements, dependent upon rooflight section; consult manufacturer's literature for more information.
Rain sensor overrides
Ritec glass coating
|Standard product features|
Extruded thermally broken aluminium profiles, grade 6063 T6.
24 V battery operated, 240 V mains supply required for trickle charging batteries via control board.
Combination of EPDM rubber seals and brush strip.
Anti-lifting mechanism to prevent lifting of sliding frame in windy conditions.
OR Control Board and magnetic limit switches.
- Double glazed:
- Triple glazed:
- Ritec glass coating:
Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.
Fixed Lantern Rooflight
Fixed Octagonal Pyramid Rooflight
Fixed Pyramid Rooflight
Fixed Ridgeglaze Rooflight
Flushglaze Fixed Circular Rooflight
Flushglaze Fixed Eaves Rooflight
Flushglaze Fixed Rooflight - One Wall Abutment
Flushglaze Fixed Rooflight - Singlepart
Flushglaze Fixed Rooflight - Three Wall Abutment
Flushglaze Fixed Rooflight - Two Wall Abutment