Polymer modified water/ frost-resistant cementitious tile adhesive for walls and floors.
Polymer-modified, water/ frost-resistant cementitious tile adhesive for walls and floors. It can be used to fix ceramics, porcelain and fully vitrified tiles, mosaics, natural stone including marble (excluding translucent), terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. It is also suitable for large format wall tiles, for use in swimming pools, total immersion areas, showers and installations subject to limited vibration, shrinkage or deflection from the substrate and heated screeds. Exceeds the requirements for BS EN 12004 C2TE.
Plaster substrates should be primed with either Prime APD, Primer or Bond SBR. Overlaid timber floor substrates should be primed with Bond SBR.
Grey and White
Highly flexible, enhanced adhesion to fully vitrified/ porcelain tiles and low porosity substrates, water/ frost-resistant, non-slip
Highly polymer-modified cement-based powder
M40/10 Natural stone covering to
M40/110 Tiling to
M40/115 Natural stone covering to
M40/12 Mosaic to
M40/120 Mosaic to
M40/5 Tiling to
M40/75 Sealant movement joints
M41/110 Terrazzo tiling
M41/120 In situ terrazzo
M41/130 Precast terrazzo
M41/140 Marble tiling
Single Part Flexible
Standard product features
Highly polymer-modified cement-based powder.