This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more
Single Component Cold Applied Liquid System for Warm Roofs - IKO Hybritech 1K PU - Waterproofing system
Single component cold applied liquid waterproofing system.
Application
Warm flat roof constructions.
Description
A solvent free and odour free single-component liquid waterproofing system based on flexible hybrid polymers. It cures through reaction with the air humidity and it is used as a fully reinforced waterproofing resin in the IKO hybritech Liquid Waterproofing System.
Features and benefits:
- Excellent durability and puncture resistance.
- Highly flexible in design application, simplifying complex detailing.
- Wet on wet application saves time.
- Does not require a primer.
- Suitable for most roof types.
- IKO guarantee for up to 20 years.
- Approved contractor and installer application.
- Consumption rate of min 2.5 kg/m².
General information
Color | Grey |
Material | Polymer |
Length | Bespoke |
Width | Bespoke |
WarrantyDescription | 20 year |
Uniclass | |
CAWS | J31/120 Warm deck roof coating J31/353 Waterproof coating J31/10 Warm deck roof coating |
Specification data - Liquid-applied warm roof covering systems
Preparation | - |
Horizontal work | IKOpro Bonding Agent.IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C. IKOpro Sprayfast MPP.KOpro Sprayfast MPP (Black, Multipurpose Primer) is a specially formulated high performance bonding primer. It allows the speed of application of the bonding primer to be five times faster than conventional bitumen primers, promoting strong bonds at temperatures as low as 5°C. For self adhesive and torch applied bitumen membranes. IKOpro Quick Dry Primer.IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes. Hybritech Bitumen Primer.IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. |
Skirtings and vertical work | IKOpro Bonding Agent.for self adhesive bitumen membranes only IKOpro Sprayfast MPP.for self adhesive and torch applied bitumen membranes IKOpro Quick Dry Primer.for torch applied bitumen membranes Hybritech Bitumen Primer.IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. |
Air and vapour control layer | IKO Ultra S-A Air and Vapour Control Layer.Self adhesive for combustible substrates S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps. IKO Ultra T-O Air and Vapour Control Layer.Torch applied to non combustible substrates only T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation. |
Insulation | - |
TypeIKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. | IKO enertherm Gold Insulation, 2400 x 1200 mm.Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements. IKO enertherm Gold Insulation, 1200 x 1200 mm.Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements. IKO enertherm MW, 60 mm thickness.A dual-density stone wool insulation board. It is used for the thermal insulation in a variety of warm flat roofing system applications where a non-combustible and/ or acoustic insulation solution is required. Width: 1200 mm. IKO enertherm MW, 120 mm thickness. |
Fixing | IKOpro PU bonding adhesive.IKOpro Sprayfast IBA. |
Carrier membrane | - |
Type | IKO Ultra H-A Underlay.IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m. |
Fixing | Bonded by heat activation to primed insulation board (laps heat welded). |
Liquid-applied waterproofing | - |
Type | IKO hybritech waterproofing.KO hybritech is a isocyanate free, solvent free and odour free single component coating based on flexible hybrid polymers. IKO hybritech cures through reaction with the air humidity. |
Reinforcement | IKO 110 sgm Polyester Fleece. |
Colour | Dusty grey (RAL 7037). |
Density | +/- 1,37g/cm³. This relates to the waterproof coating layer. |
Viscosity | +/- 6.500 mPas (25°C, 5 rpm, spindle 5). This relates to the waterproof coating layer. |
Hardness | +/- 80 (Shore A 23°C). This relates to the waterproof coating layer. |
TensileStrength | +/- 5 N/mm². This relates to the waterproof coating layer. |
Elongation | +/- 120%. This relates to the waterproof coating layer. |
Application temperatureThis relates to the waterproof coating layer. | Air temperature: 5°C - 35°C. Substrate temperature: 5°C - 30°C. Product temperature: 5°C - 30°C. |
StorageThis relates to the waterproof coating layer. | 6 months in the hermetically sealed packaging, when stored in a dry, cool and frost-free place.
|
Standards | To ISO 9001, ISO 14001. |
Similar products from IKO PLC
Cold Applied Liquid System for Car Park Decks - IKO Polimar FCS
Cold Applied Liquid System for Car Park Ramps - IKO Polimar FCS
Fast Curing Cold Applied Liquid System for Car Parks - IKO Polimar FCS
Fast Curing Cold Applied Liquid System for Cold Roofs - IKO Polimar FCS
Fast Curing Cold Applied Liquid System for Warm Roofs - IKO Polimar FCS
Single-Component Cold Applied Liquid System for Flat and Pitched Roofs - IKO Tanetech R EC/UV - Flat roof system
Two-Component Cold Applied Liquid System for Roofs, Balconies and Car Parks - IKO Metatech - Liquid Applied Waterproofing