Sikafloor® – 2 SynTop (formerly Armorex Armorshield)
Description

A pre-blended, ready to use, very hard wearing, coloured, non-metallic dry shake topping for monolithic floors. It is formulated from dry cement powder, very hard aggregates compatible admixtures and pigment.

Sprinkled onto and floated into fresh wet concrete floors, then power floated and power trowelled in the normal way, Sikafloor® – 2 SynTop forms a smooth, hard wearing surface.

The result is a very low maintenance, wear resistant floor suitable for warehouses, factory and workshop floors where a dense, abrasion resistant floor is required.

General information

Uniclass 2015

Pr_35_31_85_82 Surface hardenersPrimary

CAWS

E41/335 Dry shake trowelled finish for wearing surfaces

E41/40 Trowelled finish for wearing surfaces

Specification data - Surface hardeners

Product Reference

Sikafloor® – 2 SynTop Non-Metallic Dry Shake Floor Hardener

Sealer

Proseal

Colour

Light grey

Mid grey

Classic grey

Green

Red

Tile red

Natural

Non-pigmented.

Standard product features

When sealed Sikafloor® – 2 SynTop provides increased resistance to the penetration of oils, grease etc and is easily cleaned.

Sikafloor® – 2 SynTop conforms to BS 8204:Part 2 AR1 Class.

Sikafloor® – 2 SynTop should be sealed immediately after finishing using Sikafloor® - ProSeal (formerly Armorex Proseal), a clear acrylic resin polymer solution which impregnates, cures and hardens the concrete surface.

Similar products from Sika Limited