NBS Source
List your products
Description

SIDERISE FIP high performance acoustic panel is a thin multi-layered board offering exceptional sound transmission performance and has been specifically developed to provide a solution where an internal partition abuts a curtain wall or window mullion. Due to the impressive 46 dB Rw performance at only 31 mm thickness, the SIDERISE FIP high performance acoustic panel can also be used in many other conditions which demand the combination of a high sound reduction index (SRI) performance with a minimal thickness. This simple yet effective solution has been used on a number of projects which include hotels, residential, government and commercial buildings in both the UK and overseas.

Features and benefits:

  • Fully tested acoustic performance.
  • Maintains high ‘room-to-room’ separation.
  • Improved reduction of noise pollution in adjoining areas.
  • Very thin construction maintains ‘clean lines’ and minimizes obscuration of glazed areas.
  • Simple to detail and easy to install.
  • Up to one hour fire resistance.

General information
Finish

Sanded

Standard.

Unsanded

Uniclass 2015 Panel partition closer pieces (Pr_35_90_43_60)
Specification data
Product Reference

Siderise FIP High Performance Acoustic Panel

Size -
Length

2400 mm

Standard.

2800 mm

Minimum order quantity applies, contact manufacturer for details.

Width

50–600 mm; insert requirements.

Thickness

16 mm

Half thickness section for combination during installation.

31 mm

Standard.

Finish

Sanded

Standard.

Unsanded

Product Options

Finish:

As standard, the product is supplied unfinished to be separately clad with a thin covering (e.g. decorative laminate or coated metal plate). Normally a decorative covering is applied to both sides.

Alternatively, it can be supplied in a pre-sanded form for direct decoration on site.

Fire performance:

The product comprises boards which are inherently non-combustible and is considered fire safe. It has been tested to the temperature and pressure conditions of BS EN 1363-1 and the test principles of BS EN 1366-4 and achieved a 60/60 rating, (E) integrity was in excess of 80 minutes. Test report BMT/FEI/F15081 refers. From this test data the standard Siderise FIP panel can offer the following fire resistance ratings: 60 minutes (E) integrity and 60 minutes (I) insulation. Higher performance ratings may be possible from formal assessment of specific project details and construction materials.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2016 3 2.0
IFC
IFC2X3 2 1.3
Download now from NBS National BIM Library
Literature