NBS Source
List your products

SeceuroShield 7501 And SeceuroVision 7501 Traditional

SWS UK

Traditional-style steel roller shutter, with scrolled slat profile.

Jump to:
+44 (0)1524 772400 www.sws.co.uk
Application

Suitable for high-security office, commercial and industrial applications. This product can only be installed internally, and the shutter box must be installed above the structural opening.

Description

Traditional-style steel roller shutter, with scrolled slat profile. Features steel headbox, steel channel and angle guides. This strong construction is suitable for larger sizes.

Features and benefits:

  • Available as solid or perforated.
  • Spans widths of up to 6000 mm.
  • Can be powder-coated in any RAL/ BS colour.
  • Available in white, brown, black and cream as standard.
  • Flexibility to mix solid and perforated slats together when only partial vision is required.
  • Will reverse coil if required (will increase coil size).
  • Only available in 22 g slat.
  • Wind class rating: Class 3 (when used on 65 mm+ guides).
  • Loss Prevention Certification Board (LPCB) LPS 1175 and Secure by Design-compliant.

Application:

Suitable for high-security office, commercial and industrial applications. This product can only be installed internally, and the shutter box must be installed above the structural opening.

General information
Finish

Galvanized

Standard.

Powder-coated

RAL and BS colours available at extra cost. Insert requirements.

Uniclass 2015
Roller shutters (Pr_30_59_84_73)Primary
Specification data - Roller shutters
Product Reference

SeceuroShield 7501 Traditional Style

SeceuroVision 7501 Traditional Style

Finish

Galvanized

Standard.

Powder-coated

RAL and BS colours available at extra cost. Insert requirements.

Shutter box colour

Brown

White

Motor

Consult manufacturer for details and insert requirements.

Wicket door

Not required

Required

Accessories

None

Bullet lock

Lock for bottom slat

Standard product features

Size (h x w, minimum–maximum):

600–4700 x 900–6000 mm. (2800 x 4000 mm, maximum if spring and lock.)

- Slats:

Nominally 75 mm high x 19 mm thick.

- Bottom slat (h x d):

'T' section – 49 x 74 mm.

- Shutter box:

  • Clear opening height (to the underside of box) 1750 mm, box size 250 mm.
  • 2500 mm, box size 300 mm.
  • 3050 mm, box size 350 mm.
  • 4300 mm, box size 400 mm.

- Guide rails (w x d):

65 x 40 mm.

Construction:

- Slats:

  • SeceuroShield 7501 uses a single-skin, scrolled, solid steel slat.
  • SeceuroVision 7501 uses a single-skin, scrolled, perforated steel slat.

- Bottom slats:

'T'-sectioned steel bottom slat.

- Shutter box:

Three-sided steel casing with steel end plates.

- Guide rails:

3 mm steel channels.

Operation:

- Electric:

Electric operation is required on larger shutters due to the weight, and is optional on smaller shutters. Operation is by a tubular motor inside the axle. Control is by a momentary switch, which must be held until the shutter reaches the desired position.

Electrically operated SeceuroShield 7501 and SeceuroVision 7501, which are less than 3 m wide, will require a lock in the bottom slat. Electrically operated SeceuroShield 7501 and SeceuroVision 7501, which are between 3 and 6 m wide, will require a bullet lock on each guide rail.

- Spring-loaded:

A counterbalance spring in the axle ensures controlled raising and lowering. A lock in the bottom slat is used to secure the shutter when closed.

Weight:

  • SeceuroShield 7501: 10 kg/m².
  • SeceuroVision 7501: 8 kg/m².

Fixings:

Varies depending on size; consult the literature for details. The shutter box is fixed at each end and 1000 mm centres.

Similar products from SWS UK