Support components for external applications with tiles and pavers.
For the support of for balcony and terrace coverings.
A combinable tile and paver support system which enables individual assembly heights from 3 mm to over 1 m. It is suitable for levelling any sloped assembly of up to 10%. Unbonded (or loose lay) installation is suitable for balconies, terraces, roof terraces and other accessible spaces. It enables access to pipelines and floor drains in the remaining hollow space.
Due to the open joints between the tiles and pavers, surface water can freely drain on to the substrate and, if fitted, into the drainage system beneath. Typically, the tiles and pavers should be at least 20 mm thick and must be self-supporting.
Applications:
For the support of for balcony and terrace coverings.
Uniclass 2015 | |
CAWS | J21/467 Support system for precast concrete paving slabs J21/85 Precast concrete paving slabs J31/370 Precast concrete paving slabs J31/375 Paving tiles J31/80 Precast concrete paving slabs J41/467 Support system for precast concrete paving slabs J41/90 Precast concrete paving slabs J42/467 Support system for precast concrete paving slabs K41/320 Pedestals Q37/460 Support pedestals Q55/395 Support pedestals |
Product Reference | Schlüter®-TROBA-LEVEL |
Tile and paver supports | Schlüter®-TROBA-LEVEL-LV 33 mm high, 200 mm diameter, polypropylene. Schlüter®-TROBA-LEVEL-PL 1010 mm high, 120 mm diameter, polyethylene. Schlüter®-TROBA-LEVEL-PLV 60Adjustable - 60–130 mm high, 200 mm diameter, polypropylene. |
Height adaptors | Not requiredSchlüter®-TROBA-LEVEL-AP 1Levelling platelet, 1 mm high, polyethylene. Schlüter®-TROBA-LEVEL-PLA 3030 mm high, polyethylene. Schlüter®-TROBA-LEVEL-PLA 7070 mm high, polypropylene. |
Accessories | NoneSchlüter®-TROBA-LEVEL-PLS 6Protective support pad, 260 x 260 mm, rubber granulate/ one-sided aluminium lining. Schlüter®-TROBA-LINEDrainage channel. Schlüter®-TROBA-LINE-TLK-EGravel retaining angle. |
Standard product features | Integrated connectors: 3 mm connectors enable a consistent joint appearance and absorb movements in the covering. Load-bearing capacity: Up to 10 000 kg/ 100 kN; consult manufacturer's literature for details. Temperature resistance: -40 to +100°C. |
Product Options | Tile and paver supports: - Schlüter®-TROBA-LEVEL-LV 3: Tile and paver supports which can be installed in combination with Schlüter®-TROBA-LEVEL-PL 10 and Schlüter®-TROBA-LEVEL-PLA 30 for load distribution. It can also be used as stand-alone tile and paver supports in combination with Schlüter®-TROBA-LEVEL-AP 1 for particularly low assembly heights. - Schlüter®-TROBA-LEVEL-PL 10: 10 mm high stackable tile and paver supports constructed from made of a sound-insulating special synthetic material and can be installed on top of the substrate or, if present, directly over the waterproofing assembly. Up to 20 can be stacked together to create an assembly height of between 10–200 mm. - Schlüter®-TROBA-LEVEL-PLV 60: Pre-assembled, rotatable tile and paver supports that can be variably adjusted from 60–130 mm with an adjustment ring and two opposing threads. The thread features a protection mechanism against accidental loosening and a vibration lock. Height adaptors: - Schlüter®-TROBA-LEVEL-AP 1: Levelling platelet which adjusts the assembly height by 1 mm. Up to ten can be stacked together, enabling the assembly height at the corner of each paver or tile to be adjusted by up to 10 mm, thus accommodating minor variations in tile or paver thickness or substrate level. - Schlüter®-TROBA-LEVEL-PLA 30: 30 mm height adapter which must be used between two Schlüter®-TROBA-LEVEL-PL 10 tile and paver supports. Up to ten can be stacked together to create an assembly height of between 50–320 mm. - Schlüter®-TROBA-LEVEL-PLA 70: 70 mm height adapter which enables the quick installation of larger heights. It must be fully screwed into the bottom plate of Schlüter®-TROBA-LEVEL-PLV 60. The thread features a protection mechanism against accidental loosening and a vibration lock. It is not designed for levelling. |