RonaFloor Epoxy Floor Mortar
High performance epoxy floor screed.
Application
- Prepare the concrete in accordance with instructions.
- Prime with RonaFloor Epoxy Primer.
- Apply RonaFloor Epoxy Floor Mortar minimum 5 mm thick.
- Level and trowel finish.
- Optionally apply sealer such as RonaFloor PU Coating, one or two coats.
Description
High performance, resin rich epoxy floor screed, suitable for providing new, thin bonded wearing surfaces and patch repairing screed to BS 8204-6, Heavy Duty category. It provides a hygienic, impermeable finish requiring no seal coat.
Features:
- Good chemical, wear and abrasion resistance.
- Slip resistant texture.
- Thin section application from 5 mm thick.
- Waterproof to BS 1881, initial surface absorption 0.0 ml/m²/sec.
Application:
- Prepare the concrete in accordance with instructions.
- Prime with RonaFloor Epoxy Primer.
- Apply RonaFloor Epoxy Floor Mortar minimum 5 mm thick.
- Level and trowel finish.
- Optionally apply sealer such as RonaFloor PU Coating, one or two coats.
General information
Features | Good chemical, wear and abrasion resistance Slip resistant texture Thin section application from 5 mm thick Waterproof to BS 1881, initial surface absorption 0.0 ml/m²/sec |
Uniclass 2015 | |
CAWS | M10/17 Proprietary polymer modified wearing screeds M10/185 Proprietary polymer modified wearing screeds M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Smoothing and levelling underlay compounds
Product Reference | RonaFloor Epoxy Floor Mortar |
Type | Standard setLight foot traffic after 10–12 hours, heavy after 16 hours. Rapid setHeavy foot traffic after 4 hours. |
Colour | GreyStandard. BlueBrownCharcoalGreenRedYellow |
Similar products from Ronacrete Ltd
RonaFloor SL