Roda VenturiSmoke VS1 - AOV Smoke vent SHEV - smoke vent
Verified by manufacturer 26 days ago
VS1--2-S1-S
VS1--2-S1-S
TUV - Safety and Quality Report
Certificate type
EPD
Certificate type
A natural smoke and heat extractor vent.
Application
Suitable for flat roofs (up to a maximum roof pitch of 15°).
Description
VenturiSmoke is a natural smoke and heat extraction system (NSHE), which complies with European Standards, and features an opening panel that opens to an angle of 165° in case of fire.
Features and benefits:
- Suitable for day-to-day ventilation, subject to model.
- Durability tests of 10 000 open/close cycles.
- Good aerodynamic effectiveness.
- For daily ventilation, the 48 V drive allows for adjusting individual opening angles.
- Also available with dark flap.
- Energy-saving natural illumination.
- Fall-through-safe, subject to model.
- Fire classification A1, subject to model.
- Delivery of the systems either pre-mounted and ready-for-use or in modular design.
- Complies to the requirements of EN 12101-2.
General information
Finish | Mill |
Material | Aluminium Steel Polycarbonate |
Shape | Rectangle |
Length | 1250 mm |
Width | 1400 mm 1900 mm |
Uniclass | |
CAWS | L10/45 Rooflights L10/460 Rooflights L10/490 Roof ventilators |
Product range |
Specification data - Natural smoke and heat exhaust ventilators
Standard | To EN 12101-2. |
Opening type | Single flap. |
Mounting | Roof-mounted.Guidance for specification option: Suitable for flat roofs (up to maximum roof pitch of 15°). |
Aerodynamic free area | 1.1 m².Manufacturer guidanceNon-standard sizes are available on request. |
Reliability classification | Re 1000.Guidance for specification option: Tested and certified up to Re 1000. |
Snow load classification | Up to SL 4000.Guidance for specification option: Subject to unit size and model. |
Low ambient temperature classification | T (-05). |
Wind load classification | Up to WL 4500, subject to unit size and model. |
Arrangement | Aluminium and polycarbonate. |
Dimensions | |
Length | 1400 mm. |
Width | 1250 mm. |
Controls | SHEV fitting - 48 V d.c. motor 3.0 A.Guidance for specification option: Opening angle approximately 165°. |
Materials | |
Ventilator | |
Frame | Aluminium alloy AlMg3, AlMgSi05F22 and steel parts. |
Glazing | A2 - double-skinned aluminium (insulated).K2 - 16 mm clear / opal polycarbonate. |
Finish | Mill finish. |
Integral upstands | |
Material | Delivered pre-mounted on 450 mm high conical upstand and ready-for-installation. |
Seals | EPDM seals. |
Accessories | None.Anti-fall grid.Timer for night cooling.Wind and rain sensor for bad weather protection. |
Hinges | Hinges are fitted with positive-locking at the lateral side of the system base. Guidance for specification option: Two hinges are used for system sizes with a roof opening length of up to 1500 mm. Roof opening lengths of more than 1500 mm require three hinges. |
Sustainability data
Contains Red List materials | No |
Country of product manufacture | Germany |
Third party certifications
Third party certifications
Literature
LAMILUX Roofs of Light Brochure
LAMILUX Rooflight F100 Brochure