Verified by manufacturer 3 months ago
ISO 9001 Quality Management
Certificate type
A high build epoxy resin system for application as a heavy duty floor coating at a thickness of around 500 microns.
Epoxy resin flooring system suitable for:
A high build epoxy resin system for application as a heavy-duty floor coating at a thickness of approximately 500 micrometres. The finish provides a smooth gloss coloured finish which is suitable for all areas of industry where a hard wearing and chemically resistant floor coating is required. Applied by roller, paint brush and squeegee, the system is low odour producing a tough, seamless and hygienic floor finish.
Features and benefits:
Color | Black Blue Green Grey Red |
Finish | Gloss Guidance for specification option: High gloss. Smooth Coated |
Material | Epoxy resin |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Substrate | |
Testing | Moisture content to BS 8204. |
Preparation | Preparation of existing substrates.Guidance for specification option: Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechancial damage, pitting and cracks. |
Primer | Resuprime ST.Resuseal WB Clear.Resuprime MVT.Guidance for specification option: For use if the concrete substrate moisture levels are above 75% equilibrium relative humidity (ERH) or no damp proof membrane is present. |
Resin flooring | Base coat: Resucoat HB.Top coat: Resucoat HB.Resin floor coatings.High-build floor coatings. |
Surface treatment | Floor surface coating resins. |
Movement joints | |
Type | Resin flooring strip movement joints. |
Execution | Workmanship.Application of primers.Applying surface finishes. |
System thickness | 0.5 mm. |
Reaction to fire (to EN 13501-1) | Bfl-s1. |
Curing time | 12—16 hours. Guidance for specification option: Light traffic. 48—72 hours. Guidance for specification option: Designed traffic. ≤7 days. Guidance for specification option: Full cure traffic. |
Abrasion resistance | To ASTM D4060-14, 134.7 mg. Guidance for specification option: Loss/ 1000 cycles. |
CompressiveStrength | To BS EN ISO 604, 9.6 MPa. |
Tensile strength (to EN ISO 527) | To BS EN ISO 527-2, 7.5 MPa. |
Flexural strength | To BS EN 13892-8, 3.2 N/mm². |
Bond strength | To BS EN 13892, >3 N/mm². Guidance for specification option: Substrate failure. |
Temperature resistance | 45°C. Manufacturer guidanceTolerant of temperatures up to: |
Chemical resistance | Good. |
UV stabilization | No. |
Colour | Light Grey. Dark Grey. Red. Blue. Green. |
Finish: | High gloss. |
Performance | Manufacturer guidance
|
Testing | Manufacturer guidance
|
Country of product manufacture | United Kingdom |